Pelican 1550 Case
For display and documentation purposes, here is a model of the Pelican Protector 1550 case. The inside geometry is taken directly from Pelican's ow...
VESA Adapter 75mm to 100mm
This is a simple design for adapting 75mm to 100mm VESA mounting patterns. It has M4 clearance holes on the 100mm pattern and M4 tapped holes on th...
RJ45 Strain Relief Boot
The standard rubber strain relief boot on many Ethernet patch cables.
Common Off-Brand DIP Switch
This is a pretty detailed model of a common type of Chinese-made DIP switch, sold under many brand names, carried by SparkFun and many other distri...
3D-Printed Bandsaw Insert
This is a replacement insert for the 10-inch Delta bandsaw at work. Please read more about this project at: http://eikimartinson.com/archives/99-3D...
3D-Printed Bolt and Nut Combination
Here's a buttress-thread bolt and nut combination designed to be printed on a FDM-type ABS printer without support material. It's a good demo for y...
1/4-20 Thumbscrew with 3D-Printed Knob and Sugru Overmolding
This is a knob handle for a 1/4-20 hex-head bolt, intended to be 3D-printed. Each lobe has a soft pad which could be overmolded using Sugru air-cur...