Pelican 1550 Case
For display and documentation purposes, here is a model of the Pelican Protector 1550 case. The inside geometry is taken directly from Pelican's ow...
3D-Printed Bolt and Nut Combination
Here's a buttress-thread bolt and nut combination designed to be printed on a FDM-type ABS printer without support material. It's a good demo for y...
Common Off-Brand DIP Switch
This is a pretty detailed model of a common type of Chinese-made DIP switch, sold under many brand names, carried by SparkFun and many other distri...
RJ45 Strain Relief Boot
The standard rubber strain relief boot on many Ethernet patch cables.
1/4-20 Thumbscrew with 3D-Printed Knob and Sugru Overmolding
This is a knob handle for a 1/4-20 hex-head bolt, intended to be 3D-printed. Each lobe has a soft pad which could be overmolded using Sugru air-cur...
VESA Adapter 75mm to 100mm
This is a simple design for adapting 75mm to 100mm VESA mounting patterns. It has M4 clearance holes on the 100mm pattern and M4 tapped holes on th...
3D-Printed Bandsaw Insert
This is a replacement insert for the 10-inch Delta bandsaw at work. Please read more about this project at: http://eikimartinson.com/archives/99-3D...