Designer wanted to design a drill fixture for me

I need a drill fixture to be designed to drill 3/32 holes in 1 inch diameter shafts 5 1/2 inches deep. I would like the 1 inch shafts at the top to allow the chips to fall away from the hole. The Drill holder would be on the bottom facing upwards. I would like to control the depth and peck feed using either MACH3 or Arduino. I would like to have 4 positions to drill 4 parts at one time. Linear bearings and a lead screw to feed the parts down towards the drill with a fast evacuation in the peck cycle.