Tobias Feger

Your project! Get it done before it gets you ready.

Hire me

116

followers

Sydney, Australia

Models

Sort by: Recent
Proxxon PD400 tool post mount
Solid tool post mount for the Proxxon PD400 lathe to increase stiffness for parting off and general turning when compound is not required. Note, th...
2 4 0
Evolve GT/GTX polyurethane enclosure spacer
Polyurethane spacer for Evolve GT/GTX enclosure to fit a larger battery (~19 / 25.5 mm effective height), and provide a splash water tight seal. Th...
14 143 5
Trampa Superstar 44T pulley
Trampa Superstar 44T pulley.
10 94 0
BB Trampa Superstar bearing spacer
Board Bumpers Trampa Superstar hub bearing spacer for standard skateboard trucks and bearings.
16 113 0
Trampa Gummies 125 X 50 MM
Trampa Gummies 125 x 50 MM mounted on the Trampa Superstar hub.
20 186 6
HTD-5M-36T Kegel hub pulley
CNC machined 36T HTD-5M wheel pulley from Electric Board Solutions for 15 mm wide belts and Kegel hubs. https://electricboardsolutions.com/
26 368 0
Evolve Bamboo GT/GTX heatsink for dual Focbox ESCs
Evolve GT/GTX heatsink for mounting two Enertion Focboxes. The heatsink was designed by Philipp C. (aka BoostedBuilder) from the esk8-builders forum.
8 69 0
Truck riser 1/2 inch with cable clamp
Truck riser 1/2 inch with cable clamp for my Caliber II trucks.
4 105 0
Hobbyking GT2B remote casing mod (in development)
Slim casing for the Hobbyking GT2B remote. The remote is based on published design files on Thingiverse: https://www.thingiverse.com/thing:1713157...
6 114 0
Evolve Bamboo GT/GTX heatsink
Evolve Bamboo GT/GTX heatsink without ESC mounting holes.
5 76 0
36T HTD-5M-15MM wheel pulley for Kegel hubs.
36T HTD-5M-15MM wheel pulley for 15 mm belts and Kegel hubs.
18 412 0
Orangatang Kegel wheel
Approximated model of the Orangatang Kegel longboard wheel.
21 425 1
Evolve Bamboo GT/GTX enclosure riser
Battery enclosure riser for the Evolve Bamboo GT/GTX to fit a single layer 18650 Li-ion battery pack. The spacer has an effective thickness of 14 m...
18 302 0
BOA Constrictor wheel (100 mm)
Approximated model of the jelly red BOA/JED Boards Constrictor 100 mm wheel with 65 mm contact patch. Edit: dimensions updated
17 516 1
Motor mount for 63XX brushless outrunners
Motor mount for 63XX brushless outrunners. The square hole of the mounting clamp fits a hanger of 19x19 mm and the nominal center distance between ...
82 672 0
Custom 18650 battery spacer
Ultra slim battery spacer for Li-Ion 18650 cells. The cells are 19.2 mm apart.
31 546 1
Rayne flight (2016) deck
Approximated model of the Rayne Flight (2016) deck.
13 286 0
ZWO ASI1600MM Pro (mono)
Model of the ZWO ASI1600MM Pro (mono) CMOS camera.
0 39 2
Motor mount for brushless outrunner (in development)
Electric skateboard motor mount for a 63XX brushless outrunner from Alien Power Systems. The rectangular hole fits a hanger width of 20x21.5 mm.
68 698 3
Li-ion 10s4p flexible battery pack
Model of a 10s4p flexible battery pack.
22 340 7
Belt cover for 63XX brushless motor
Custom-made belt cover for 63XX brushless motor.
3 82 0
Evolve GTR SE
Electric skateboard, inspired by the Evolve GT Bamboo, just heaps more powerful. In fact, this will be the most powerful Bamboo GT out there. Lipo ...
72 836 9
Starlight Xpress Trius-SX694 CCD
Model of the Starlight Xpress Trius-SX694 CCD camera.
4 40 0
Starlight Xpress Trius-SX694 water cooling
Custom water cooling kit for the Starlight Xpress Trius-SX694 CCD camera. All components are glued together with Loctite EA 9461.
12 54 0
White Stratasys Logo White GrabCAD Logo
© 2024 Stratasys Inc.
ABOUT US
RESOURCES
SOCIAL
Streamline Pro
Control
Print
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.