Extrude or Sweep or Revolve in FreeCAD | Hydraulic press

siddharth sharma

12 Nov, 2020 10:47 AM

Extrude or Sweep or Revolve in FreeCAD | Hydraulic press
Note-
1. All Dimension Are assumed.
2.All Ram (4) Parts is not similar to drawing I have changed it, so please follow my steps.
3.I used Fast playback speed at sketch only .

Description FreeCAD is a free and open-source general-purpose parametric 3D computer-aided design modeler

and a building information modeling software with finite element method support.

Initial release: 29 October 2002; 17 years ago
Stable release: 0.18.4 / 26 October 2019; 7 months ago

Downloads FreeCAD software from this
https://www.freecadweb.org/downloads.php
.

1. Step 1:

   Extrude or Sweep or Revolve in FreeCAD | Hydraulic press

   Note-

   1. All Dimension Are assumed.

   2.All Ram (4) Parts is not similar to drawing I have changed it, so please follow my steps.

   3.I used Fast playback speed at sketch only .

   
   

   
   

   Description FreeCAD is a free and open-source general-purpose parametric 3D computer-aided design modeler

   
   

   and a building information modeling software with finite element method support.

   Initial release: 29 October 2002; 17 years ago

   Stable release: 0.18.4 / 26 October 2019; 7 months ago

   
   

   
   

   Downloads FreeCAD software from this

   https://www.freecadweb.org/downloads.php