How to model a Lamborghini Aventador rim on Solidworks?

Andreas Gkertsos

22 Feb, 2012 10:55 AM

The steps...

1. Step 1:

   Front plane -> sketch... we sketch the following shape...
   

   

2. Step 2:

   create an offset plane from front plane.
   

   

3. Step 3:

   another sketch...
   

   

4. Step 4:

   loft the 2 sketches...
   

   

5. Step 5:

   create an offset sketch at the front face,
   

   

6. Step 6:

   extrude cut it, and then draft the inner faces..
   

   

7. Step 7:

   then the top one..
   

   

8. Step 8:

   revolve cut the front face to give it the final shape...
   

   

9. Step 9:

   added some fillets...
   

   

10. Step 10:

    revolve without merging result...
    

    

11. Step 11:

    circular pattern with bodies..
    

    

12. Step 12:

    and finally combine all bodies together.
    

    

13. Step 13:

    revolve withoun merging result
    

    

14. Step 14:

    offset that surfaces,
    

    

15. Step 15:

    cut with surface
    

    

16. Step 16:

    combine.
    

    

17. Step 17:

    cut extrude from front plane...
    

    

18. Step 18:

    again...
    

    

19. Step 19:

    circular pattern...
    

    

20. Step 20:

    added some fillets...
    

    

21. Step 21:

    revolve the tyre...
    

    

22. Step 22:

    fillet...
    

    

23. Step 23:

    create offset surface...
    

    

24. Step 24:

    extend
    

    

25. Step 25:

    cut up to surface..
    

    

26. Step 26:

    pattern and mirror
    

    

27. Step 27:

    cut up to surface again...
    

    

28. Step 28:

    patern...
    

    

29. Step 29:

    And here is the result...