Feed

how to model a spur gear in inventor fusion

Tutorial by Mech Amine
Small

how to model a spur gear in inventor fusion

  1. Step 1:

    open inventor fusion and create circle R=80 mm

  2. Step 2:

    click extrude

  3. Step 3:

    extrude circle limit =35 mm and click ok

  4. Step 4:

    create circle in blue face

  5. Step 5:

    create circle R=64 mm in center

  6. Step 6:

    click press/pull

  7. Step 7:

    press/pull limit = -6 mm

  8. Step 8:

  9. Step 9:

    create circle R=12 mm in center

  10. Step 10:

    click press/pull

  11. Step 11:

    press/pull limit = -120 mm

  12. Step 12:

    create profil with draw

  13. Step 13:

    1-click trim
    2-select line to trim

  14. Step 14:

  15. Step 15:

    extrude profil limit =-40 mm

  16. Step 16:

  17. Step 17:

    choose circular pattern

  18. Step 18:

    select face

  19. Step 19:

    Select centre and nbr of pattern = 20 and click ok

  20. Step 20:

Comments

Please log in to add comments