Feed

How you create a mold of a piece in SW ?

Tutorial by Fateh MERRAD
Small

This is the answer for a detailed tutorial for this question

  1. Step 1:

    1 - importing a step file format and click OK

  2. Step 2:

    2 - then click on Import Diagnostics

  3. Step 3:

    3 - and click on the correct surfaces

  4. Step 4:

    4 -And here is the piece with surfaces corrected

  5. Step 5:

    5 -is added after the window molding tools

  6. Step 6:

    6 - we begin our work by joint lines

  7. Step 7:

    7 - you select the aperture plane

  8. Step 8:

    8 -and click on analysis of body

  9. Step 9:

    9 -we note that there are more colors click on the stop which is between the two colors.
    - click the right mouse button and select tangency

  10. Step 10:

    10 -we note that lines joints are selected

  11. Step 11:

    11 -Here is the line of joints that is blue

  12. Step 12:

    12 -we click on the plane attached

  13. Step 13:

    13 -we set the plane of the joint in 36 mm

  14. Step 14:

    14 -click ok

  15. Step 15:

    15 -after we go to the last operation
    (kernel - print)

  16. Step 16:

    16 -click kernel - print
    and click on the plane

  17. Step 17:

    17 -after it will automatically insert a sketch
    we draw a rectangle that must be below the plane of the joint

  18. Step 18:

    18 - Click ok

  19. Step 19:

    19 - is taken as the dimensions of the image

  20. Step 20:

    20 - and here our mold is created

  21. Step 21:

    21 - we hide the parting

  22. Step 22:

    22 -moving the upper part

  23. Step 23:

    23 - a height of 60 mm

  24. Step 24:

    24 - After our piece on Chache

  25. Step 25:

    25 - This is our core - stamp

  26. Step 26:

    26 - you find the mold here to repeat the tutorial :
    http://grabcad.com/library/kernel-print

Comments

Please log in to add comments