Feed

Tutorial - Modeling CSK head sq. nut coach bolt in SolidWorks?

Tutorial by Sudhir Gill
Small

Here is the tutorial.

  1. Step 1:

    Start SolidWorks in Part mode. Top plane>>Sketch.

  2. Step 2:

    Draw a circle of 24mm dia.

  3. Step 3:

    Extrude it by 2mm.

  4. Step 4:

    Top face>>Sketch.

  5. Step 5:

    Select the edge and then convert entities.

  6. Step 6:

    Extrude it by 6mm and 60º draft.

  7. Step 7:

    Reference Geometry>>Plane.

  8. Step 8:

    Select the circular edge. Click OK.

  9. Step 9:

    Plane1>>Sketch.

  10. Step 10:

    Draw a Polygon.

  11. Step 11:

    Extrude it by 10mm.

  12. Step 12:

    Top face>>Sketch.

  13. Step 13:

    Draw a circle tangent to the sides of the polygon.

  14. Step 14:

    Extrude cut with draft at 60º.

  15. Step 15:

    Top face>>Sketch.

  16. Step 16:

    Draw a circle tangent to the sides of the polygon.

  17. Step 17:

    Extrude it by 50mm.

  18. Step 18:

    And we have the part.

  19. Step 19:

    After making the threads.

Comments

Please log in to add comments