Tutorials

Small

How to Paint FDM Parts

0 0 Intermediate
There are many reasons for coating FDM parts. These include UV protection, sealing, shielding, or surface modification, but painting FDM parts for an aesthetically pleasing finish is the most common. Painting brings a product to life by adding depth, contrast and character. This is true for concept models, marketing samples, and finished goods. For product development and many production applications, paint completes the desired look and feel. With a little know-how and a touch of patience, models, prototypes, and parts can look like production parts. The following instructions are for creating top-quality painted parts. For applications that do not require this level of finishing, skip any unneeded steps. A good paint finish traditionally starts with sanding and filling.
Small

How to Orient Parts for Strenth, Speed or Surface Finish

2 0 Intermediate
Build optimization is dependent on a part’s function (conceptual model, functional prototype, manufacturing tool or end-use part). Based on the part’s function, the user must select the appropriate orientation to balance or optimize surface finish, strength, or build time of the part. By following these best practices, you can cut down on time and waste.
Small

How to Section Oversized Parts Using Insight

0 0 Intermediate
A part that is larger than the build envelope of a 3D printer can still be printed. Oversized parts may be sectioned and subsequently bonded. This tutorial will give you the best practices for sectioning oversized parts. Software: Insight software
Small

How to Insert a Z Pause in a Stratasys Printer

4 0 Intermediate
How do I use a Stratasys printer with multiple materials? Multiple colors? How do I add metal inserts in my 3D printed part? This tutorial explains how to use Stratasys software to insert pauses (Z-pause) during an FDM print job, to change materials, colors or to add metal inserts. Go to Step 1 for some documentation and examples of parts printed with Z Pause.
Small

How to go From 3D Scanning to 3D Printing

2 0 Intermediate
A 3D scanner is a device that analyzes and captures the geometry and colors of physical objects to transform them into digital 3D models. The scanning process collects sample points from the object’s surface and generates its geometric shape through extrapolation. There are many different 3D scanning technologies and each one comes with its own advantages, limitations and cost. Stratasys tested two types of Creaform 3D scanners: the HandyScan 700 and the Go!SCAN 20. These portable 3D scanners can be used for a wide range of applications, offering a simple and intuitive scanning experience, providing fast and reliable results. The Go!Scan 20 scanner can capture 3D data in color. It provides a very fast measurement rate and requires minimal data post-processing. The HandySCAN 700 is used mainly for taking measurements and reverse engineering. This scanner is fast at delivering accurate and high resolution 3D scans while remaining simple to use. All phases of product design, from concept through manufacturing, can benefit from the workflow combination of 3D scanning and printing. This process can reduce the number of design iterations and the time between each, lowering the total cost of each prototype. The following is brought to you by Stratasys:
Small

enabled real view in solidworks 2017

0 0 Intermediate
enabled real view in solidworks 2017
Small

How to Apply Custom Toolpaths for Thin Walls and Bosses

0 0 Intermediate
When processing an STL file, smaller or larger toolpath widths are sometimes required to achieve proper fill for certain portions or features of a part. While changing the tip or modifying global toolpath settings for the entire part will generally work, oftentimes it is unnecessary. Custom Groups provide a means to specify different toolpath parameters for an individual curve or curves. The following tutorial is brought to you by Stratasys:
Small

Applying Colors to Your Model Using SOLIDWORKS, Adobe Photoshop, and Rhinoceros

0 0 Intermediate
Being able to print in full color, including gradients and textures, is one of the many advantages of the Stratasys J750 3D Printer. This best practices document provides instructions for color selection with the Stratasys J750 and includes procedures for models designed with SOLIDWORKS, Adobe Photoshop and Rhinoceros software.
Small

How to Make GrabCAD Voxel Print Slices Using Matlab

3 0 Expert
This tutorial is intended for users who already have a passing familiarity with Matlab and J750 operation. It is NOT intended to be a comprehensive lesson on how to use the Matlab software or PolyJet printers. The following is brought to you by Stratasys:
Small

3D Printing: Tip Selection FDM Best Practices

0 0 Intermediate
To minimize build time and ensure feature details are built, it is important to select the correct tip size for each part. Using too small a tip on a part can significantly increase build times. Example: a part with a 5” z-axis dimension will have 500 layers using a T16 tip, 715 layers using a T12 tip, and 1000 layers using a T10 tip. The following tutorial is brought to you by Stratasys.