Tutorials

  • Assemblies ×
Small

V6 Engine Design in Catia

Tiny Avnish Kumar (अवनीश कुमार )
in Assemblies
16 4 Expert
V6 Engine Design in Catia | Advanced Assembly | CATIA TUTORIALS Vedio Links-https://www.youtube.com/watch?v=IoZoQKwlWtA&t=5s A V6 engine is a six-cylinder piston engine where the cylinders share a common crankshaft and are arranged in a V configuration. The first V6 prototype engine was produced in 1906, however it took until 1950 for the first automotive V6 engine to reach production. In the past 20 to 30 years, the V6 layout has become the most common layout for six-cylinder automotive engines
CATIA step assmbly v6 v5 catia enigine engine automobile
Small

Robotic Tank Tread Assembly- Fusion 360 Tutorial (Tracked Robot Part 2)

Tiny Engineering Juice
in Assemblies
6 1 Beginner
#Fusion360 #Fusion360Tutorial #AutodeskFusion360 Buy this chain: https://amzn.to/3f2FZEl In this series, we will design and develop a tracked, tank-like mobile robot optimized for use on sand and in desert environments. The modeling of the treads, custom sprocket, idler rollers and 3D printed suspension system will be shown in great detail. We will first create the chain links themselves and the tread pieces, then pattern them along the shape of the loop. Once we finish this, we will create the custom sprocket and motor connection followed by the idler spindle and finally the suspension system. In the end, we can mirror our entire assembly to the other side to create the right side tread. Working on only one side at a time makes it easier on our computers and allows us to work faster with less lag-time.
Fusion 360 robotics tutorial 360 fusion
Small

Clash Analysis In CATIA V5

Tiny Innovative Mechanical Designs
in Assemblies
5 0 Intermediate
In this video i have explained clash detection analysis in CATIA V5 assembly design workbench.
CATIA catiaclashanalysis catiaassemblydesign v5 catia
Small

DIY Laser Engraver

Tiny Daniel Wimmer
in Assemblies
3 0 Beginner
The DIY Laser Engraver is a simple tutorial, that shows you how to build your own fully operational Laser engraver. It's an Arduino Uno based model, that can learn you many things about electronics and mechanical engineering. Through the Laser you can engrave wood and some plastics. Be careful and use eye-protection, it is dangerous to use lasers.
SOLIDWORKS diy printer 3d gcode engraver cutter laser cnc
Small

How to ANIMATE in Solidworks

Tiny Tirumala Rao
in Assemblies
3 0 Beginner
This is the third part of tutorial where we will me assembling and animating the roots blower.
SOLIDWORKS 3d animation catia dassault modelling cad solidworks
Small

How to Make a DC Motor & Sprocket Assembly: Fusion 360 Robotics Tutorial for Beginners (Robot Part 3)

Tiny Engineering Juice
in Assemblies
2 0 Beginner
#Fusion360 #Fusion360Tutorial #AutodeskFusion360 In this series, we will design and develop a tracked, tank-like mobile robot optimized for use on sand and in desert environments. The modeling of the treads, custom sprocket, idler rollers and 3D printed suspension system will be shown in great detail. We will first create the chain links themselves and the tread pieces, then pattern them along the shape of the loop. Once we finish this, we will create the custom sprocket and motor connection followed by the idler spindle and finally the suspension system. In the end, we can mirror our entire assembly to the other side to create the right side tread. Working on only one side at a time makes it easier on our computers and allows us to work faster with less lag-time. Buy this chain for projects: https://amzn.to/3f2FZEl
Fusion 360 project robotics assemblies beginner tutorial 360 fusion
Small

Inventor 2021 | Radial Engine | Assembly 15

Tiny Olaoluwa Samson Ogunseye
in Assemblies
2 1 Beginner
In this video, I complete the assembly of the radial engine project. Parts used in this video are referenced below. Happy Modeling!
Autodesk Inventor tutorial inventor engine radial aviation boeing airforce aircraft
Small

Extracting Outer Surface Area Parameter for the Drawing | Creo Parametric

Tiny Kulbir Sandhu
in Assemblies
1 0 Intermediate
In the design process, when outer surface area is required for coating treatment for set of assembly parts, SHRINKWRAP technique can be useful as described in this video.
PTC Creo Parametric design structure technique modelling creo drawing coat parameter area surface outer shrinkwrap
Small

Component interface - Automatic placement definition

Tiny Vladimir Palffy
in Assemblies
1 0 Beginner
In this tutorial, you can learn - How to place objects automatically How to define component interfaces and not place objects one by one and always select the same references.
PTC Creo Parametric tutorial creo interface component
Small

KTM RC8 with Interchange Wheels

Tiny Vladimir Palffy
in Assemblies
1 0 Intermediate
I would like to show you How to create Interchange assembly - How to easily change one model to another one
PTC Creo Parametric creo models assembly interchange
Small

Motion Analysis in Solidworks

Tiny Aditya Raj
in Assemblies
1 0 Expert
Motion Analysis of Twister Conveyor
SOLIDWORKS assemblly conveyor twister analysis motion solidworks motionanalysis
Small

Automatically assembled components

Tiny Vladimir Palffy
in Assemblies
1 0 Intermediate
In this video tutorial you can see the power of "Unlock Potential with PTC's Creo" - Real-time Automatic component placement defined by "simple Mapkey" in Creo. Unlock the Full Potential Across your Company. With PTC Creo Parametric you can easily improve efficiency and productivity - easy to create your final product based on BOM with customized nested mapkey.
PTC Creo Parametric mapkey placement component automatic real-time creo ptc-s with potential unlock
Small

Knuckle Joint

Tiny Aditya Raj
in Assemblies
1 0 Intermediate
Assembly of Knuckle joint
SOLIDWORKS assembly joint knuckle solidworks