Tutorials

Missing small

Beam connection with Abaqus

0 0 Intermediate
In some FEM's software, it's really easy to set beam connection between two body. like in ANSYS Mechanical. This document is a simple tutorial in order to create a link between two bodys, with a deformable behaviour. Also, to take into consideration the effect of the washer, we pilot slaves nodes in rigid way with the master node.
Small

Tutorial 96: 2D ENF with XFEM method

0 0 Intermediate
The end notched flexure (ENF) test has been designed in order to obtain inter-laminar fracture toughness under in-place shear deformation mode called as Mode II. Agenda: Modelling ENF beam Modelling bulk fracture which permits a crack to be located in the element interior Plotting Load-Displacement Curve Comparing Result with cohesive element results Check below link for the full tutorial: https://www.udemy.com/abaqus-tutorial-intermediate/?couponCode=GRABCAD
Small

Tutorial 95: Buckling and Post Buckling of Composite Plate

0 0 Intermediate
Buckling is characterized by a sudden sideways deflection of a structural member. This may occur even though the stresses that develop in the structure are well below those needed to cause failure of the material of which the structure is composed. Agenda: Modelling Composite Plate Creating Composite Material Applying Mesh Running Eigenvalue simulation Check Below link for the full tutorials: https://www.udemy.com/abaqus-tutorial-intermediate/?couponCode=GRABCAD
Small

Tutorial 94: 2D DCB with XFEM method

0 0 Intermediate
This is a popular test in order to determine mode I fracture energy of adhesive bonds, which is a measurement of the fracture toughness in the presence of pre-crack. In this tutorial, you will learn how to use XFEM theory to make pre-crack. Agenda: Modeling Double Cantilever Beam Modeling bulk fracture which permits a crack to be located in the element interior Plotting Load-Displacement Curve Comparing Result with cohesive element results Check below link for the full tutorial: https://www.udemy.com/abaqus-tutorial-intermediate/?couponCode=GRABCAD
Small

Tutorial 93: 3D DCB with cohesive element

0 0 Intermediate
This is a popular test in order to determine mode I fracture energy of adhesive bonds, which is a measurement of the fracture toughness in the presence of pre-crack. In new method we are able to find cohesive parameters directly by using image correlation system. In this tutorial you will learn how to create 3D double cantilever beam by using 3D cohesive element. Agenda: Modeling 3D-Double Cantilever Beam Creating Cohesive Material Creating Cohesive Mesh Plotting Load-Displacement Curve and comparing it with 2D model Check below link for the full tutorial: https://www.udemy.com/abaqus-tutorial-intermediate/?couponCode=GRABCAD
Small

Tutorial 92: Single Lap Joint (Surface based Cohesive)

0 0 Intermediate
Adhesive joints attract more attention due to their advantage of enabling the development of lightweight, cost-effective and highly integrated structures with a more uniform load distribution and improved damage tolerance. The SLJ has been the most studied in the literature, on experimental and theoretical terms, due to its facilitated fabrication. But that does not mean the tensions present in the joint are easy to analyze. The aerospace area was the first sector that promoted the use of adhesives in the aircraft manufacturing process, due to its outstanding advantages over traditional methods such as welding or bolting. many types of commercial aircraft whose economical operations benefit considerably from the reduced weight offered by the bonded composite assemblies. Agenda: Modelling Single Lap Joint Creating Cohesive interaction Property Creating Cohesive Surface-Surface contact Plotting Load-Displacement Curve Plotting Stress on Bond-line path Check below link for the full tutorial: https://www.udemy.com/abaqus-tutorial-intermediate/?couponCode=GRABCAD
Small

Tutorial 91: 2D DCB with cohesive element

0 0 Intermediate
This is a popular test in order to determine mode I fracture energy of adhesive bonds, which is a measurement of the fracture toughness in the presence of pre-crack. Agenda: Modelling Double Cantilever Beam Creating Cohesive Material Creating Cohesive Mesh Plotting Load-Displacement Curve Check below link for the full tutorial: https://www.udemy.com/abaqus-tutorial-intermediate/?couponCode=GRABCAD
Small

Youtube tutorial on CFD fluent on Ansys

2 0 Intermediate
.
Small

Sphere of influence and Coordinate system in ANSYS - Tutorial

0 0 Intermediate
In this video you can find the use of SPHERE OF INFLUENCE tool for mesh in ansys and you will also learn how to generate COORDINATE SYSTEM in ansys.
Small

Pinch tool in ANSYS - Tutorial

1 0 Beginner
In this video you can find the use of pinch tool in ANSYS for mesh
Small

contact sizing in ansys for mesh - Tutorial

0 0 Intermediate
In this video you can find the use of contact size tool use for meshing in ansys.
Small

Natural vibration frequencies analysis in Catia V5

1 0 Intermediate
This tutorial shows how you can use the Generative Structural Analysis module from Catia V5 in order to see the natural vibration frequencies of a eolian propeller. https://www.youtube.com/watch?v=1ZWZJTE1cNU&t=4s
Small

Fsae upright - static structural analysis in Ansys Workbench

0 0 Intermediate
In this tutorial I will be showing you how to perform a static structural analysis of fsae upright in Ansys Workbench 18 Topics covered: Apply material to the imported geometry; Mesh Statistics; Create custom coordinate systems (rotate coordinate systems); Apply forces through the coordinate systems; Post processing; Save results through the images.
Small

Analisis de estructuras catia(castellano)

0 0 Beginner
Analisis de los pasos a seguir por tal de realizar un analisis estructural en una pieza, empleando el programa catia.
Missing small

BIW,Plastic Sheet MEtal & 3D Compents to Mesh /Model in Hypermesh S/W

0 1 Intermediate
We need BIW,Plastic Sheet MEtal and 3D Compents to Mesh /Model in Hypermesh S/W