Tutorials

Small

Grenade Launcher SolidWorks tutorial Part 2

1 0 Expert
Grenade Launcher SolidWorks tutorial Part 2 3D Modeling: Learn key techniques and tools to design parts Features to be used: Sketch with picture, Boss-Extrude Thin, Boss-Extrude, Extruded-Cut, Reference Geometry - Plane, Boundary Boss/Bass, Fillet, Linear Pattern, Mirror Feature, Mirror Body,
Missing_small

How to do machine block in AUTOCAD

0 0 Expert
Machine block used to withstand compressive forces
Small

Grenade Launcher SolidWorks tutorial Part 1

2 2 Expert
Grenade Launcher SolidWorks tutorial Part 1 3D Modeling: Learn key techniques and tools to design parts Features to be used: Sketch with picture, Boss-Extrude Thin, Boss-Extrude, Extruded-Cut, Reference Geometry - Plane, Boundary Boss/Bass, Fillet, Linear Pattern, Mirror Feature, Mirror Body,
Missing_small

Top 5 SolidWorks Tips MUST Watch

0 1 Expert
https://youtu.be/K45dlh75lTk
Small

SolidWorks tutorial ALL METRIC NUTs IN ONE FILE and how can be used in assembly

4 0 Expert
Metric nuts configurator Design Table Derivate Configuration Use Derivate Configuration in Assembly One file used for all metric screws in assembly
Small

SolidWorks tutorial ALL METRIC SCREWs IN ONE FILE and how can be used in assembly

4 0 Expert
Metric screw configurator Design Table Derivate Configuration Use Derivate Configuration in Assembly One file used for all metric screws in assembly
Missing_small

How to Made any Sketch Auto Trace able in SolidWorks

0 2 Expert
https://youtu.be/qhBNWL4VTUU
Small

How to Make 10 Poles Permanent Magnet AC Alternator 600 RPM

2 0 Expert
https://youtu.be/WMOZlUC4r4g
Small

How to Make Pelton Wheel Bucket in SolidWorks

0 0 Expert
https://youtu.be/MfSmp1bZeTs
Missing_small

How to make Chain Part in SolidWorks

0 0 Expert
https://youtu.be/fj_vtctRXa8
Small

Tutorial on Casting- Machining with link in NX

2 1 Expert
Tutorial on Casting- Machining with link in NX
Missing_small

how to create hole table in creo

0 0 Expert
in this tutorial i will show you how to create hole table in creo drafting
Small

Tutorial 85: Determining the Fatigue Behavior of Composite Tensile Specimen

3 0 Expert
Random vibration analysis is another spectral method. The purpose of a random vibration analysis is to determine some statistical properties of a structural response, normally the standard deviation (1σ) of a displacement, force, or stress. (1σ) Is used to determine fatigue life of structure. In this tutorial, first we will model tensile specimen in ACP tools. Then we need to find 10 modes of specimen between 0 Hz to 1500 Hz frequencies. After that we need to calculate Sigma RMS, N, occurrence and V0 to calculate life time of specimen. Agenda:  Creating Composite Tensile specimen in ACP  Importing ACP model into modal analysis  Finding Mode Shapes  Introduction of random vibration  Applying boundary conditions  Determining the fatigue behavior of composite tensile specimen
Missing_small

Tutorial 84:Tensile Test

3 0 Expert
Tensile testing, is also known as tension testing is a fundamental materials science test in which a sample is subjected to a controlled tension until failure. The results from the test are commonly used to select a material for an application, for quality control, and to predict how a material will react under other types of forces. In this tutorial, first we are going to model specimen geometry in CAD software then we will apply composite layers in ACP tools. In the next step, we are going to model two metal parts and then at the end we will combine models into static structural. Meshes can be imported into Mechanical from multiple systems. It is possible to combine composite shell, composite solid, and non-layered shell and solid meshes to perform mixed analysis. Agenda:  Modeling solid composite specimen  Add metal parts  Transfer parts to ANSYS Mechanical  Apply boundary conditions, loads and solve the model  Evaluate solid model results in ANSYS Composite PrepPost
Small

Tutorial 83: Creating Sandwich Composite Plate with Honeycomb Core

3 0 Expert
Honeycomb structures are natural or man-made structures that have the geometry of a honeycomb to allow the minimization of the amount of used material to reach minimal weight and minimal material cost. The geometry of honeycomb structures can vary widely but the common feature of all such structures is an array of hollow cells formed between thin vertical walls. In this tutorial we are going to create sandwich composite plate. First, we will create two composite plates in two different ACP and then we will create honeycomb in mechanical model by using Honeycombcreator extension. Then, we will combine three models into static structural to do stress analysis. At the end we will do eigenvalue simulation. Agenda:  Using two ACP to create two composite plates  Creating Honeycomb by using honeycomb creator  Apply boundary conditions, loads and solve the model
Small

Tutorial 81: Reinforced Beam with Combination of Steel and Composite Material

4 0 Expert
Reinforced Concrete is a common building material for construction of facilities and structures. While concrete has high compressive strength, it has limited tensile strength. To overcome these tensile limitations, reinforcing bars are used in the tension side of concrete structures. In this tutorial, first we are going to model concreate geometry in mechanical model then we need to model 4 structural steel rebar in another mechanical model. at the end we are going to reinforced structural steel rebar by using 4 composite layers Agenda:  Creating all models in CAD software  Using three different type of materials  Connecting two mechanical models and ACP into static structural  Applying boundary conditions, loads and solve the model  Applying variable pressure on beam
Small

Tutorial 80: Debonding in composite model

2 0 Expert
Debonding is another type of interface/interphase failure, which is often classified as interfiber failure. It is simply attributed to the nature of the bond between fiber and matrix, whether occurring through a zero-thickness interface or an interphase region. Debonding is simply a loss of physica/chemical connection between the reinforcing material and the matrix. This could occur for part of a fiber, whole fibers, or many fibers. Simply we can say Debonding happen when two materials stop adhering to each other and Delamination when a laminated material becomes separated, perhaps induced by poor processing during production, impact in service or some other means. Agenda  Set up properties for debonding separation inside engineering data  Creating Composite model in ACP  Using 2 solidmodels tools in ACP to create solid model  use contact definitions with cohesive zone material inside Mechanical  Introduction of Contact tools in mechanica  Applying Boundary conditions and analysis settings  Postprocessing
Small

Tutorial 75: Find the Best Laminate Configuration of a Composite Tube under compressive load

3 0 Expert
The Parameter feature connects Inputs and Outputs to the Parameter Interface in the Workbench project. There are three numerical variables which are diameter, laminate code and thickness. These variables should be applied to ascertain optimum condition for making composite. In this tutorial we are going to solve problem for specific laminated lay up to find critical buckling load on the composite tube model then by using parameter command in ANSYS we will ask software to solve problem for various laminate lay-up, thickness and tube diameter. Agenda:  Modeling composite tube geometry in ACP tools  Define input parameters for the ply angle of all eight defined plies  Importing model into static structural and applying boundary conditions and force  Solve the model and define output parameter for Eigenvalue amount  Specify design variations in ANSYS Workbench and update all design points
Small

Tutorial 74: Modeling Lug in ACP (complex geometry):

3 0 Expert
Solid model settings control how the solid model is divided into elements in the thickness direction and how drop- and cut-off elements are handled. The level of detail required in the solid model depends on how accurate certain features are to be modeled. This depends on the judgment of the designer. Extrusion guides add more complex possibilities in shaping the model. The cut-off operation is analogous to machining a composite part after curing. In this tutorial we are going to use extrusion guide, cut off element and snap to geometry to create complex geometry. Agenda:  Create complex composite model  Import geometry for cut-off rule  Creating Virtual Geometries  Import geometry for Extrusion-guides feature  Extrude solid composite using Extrusion- guides feature
Small

Como dimensionar la matriz y los punzones de un troquel de corte

0 0 Expert
Con este tutorial pretendemos explicar como dimensionar la matriz y los punzones de un troquel de corte, garantizando la tolerancia de fabricación de la pieza así como logrando la mayor vida útil del troquel.
Small

How to start BIW design using styling data

2 1 Expert
In this tutorial my intention is to create rough envelop of BIW of front hinge near the door part. THis tutorial uses styling data which is class A surface.
Missing_small

Tutorial 73: Simulate Nonlinear Buckling Analysis of a Half-Symmetry Rectangular Beam with ls-dyna

3 1 Expert
Simulate Nonlinear Buckling Analysis of a Half-Symmetry Rectangular Beam with ls-dyna
Missing_small

Where there is a tank or ship or a steam engine, the train of the drawings, I can buy

0 0 Expert
i want to find some the drawings ank or ship or a steam engine ,Where i can buy it
pdf
Small

Drawing a sample piece

0 0 Expert
A sample piece drawing is as follows.
Small

Way to reach the drafting menu

0 0 Expert
The way to reach the drafting menu is as follows.
Small

Material assignment in catia

0 0 Expert
The material assignment to the part in the catia is carried out as follows.
Small

Information about Catia - Appearance

1 0 Expert
Appearance Ticks are applied as follows.
Small

Information about Catia - View Toolbar -2

0 0 Expert
The commands related to View Toolbar are mentioned below.
Small

Information about Catia - View Toolbar

0 0 Expert
The commands related to View Toolbar are mentioned below.
Small

Information about Catia - Catia General Settings - 3

0 0 Expert
General settings for the catia program; It should be as follows.