Tutorials

[Tutorial Video] SOLIDWORKS Create Role Motion.

36 1 Intermediate
This Tutorial I show how to create a part in context SOLIDWORKS for creating Role Motion use equation.

I Built a Military Robot

30 5 Intermediate
Mobile, military robot optimized for use in desert environments which can be controlled remotely or autonomously and can collect/ stream video to a VR headset via its front mounted camera. The method of movement is a continuous track, created using steel roller chain connected by fasteners with 3D printed links. These loops sit on a custom designed drive sprocket and idler sprocket with 4 shock absorber loaded roller pins that act as the suspension system. The drive motors are powered by '18650' batteries, directed by a raspberry pi 4 and connected to a motor controller. For connectivity, a mobile device can connect to the pi's external antenna as it is a WiFi access point. From here, directions can be sent to the robot from the mobile device using the Node Red GUI and additionally, the entirety of the main raspberry pi computer can be accessed for the use of sending custom commands for autonomous movement.

Solidworks 3d Curve Creation using Project Curve

27 4 Intermediate
Project curve is something every beginner get stuck into. Apart from visualizing, it is hard to figure out as how it gets projected. The video is about understanding the project curve's use.

Adidas X18+ Soccer Boot Surfacing

22 1 Intermediate
We are going to learn to model the Adidas X18+ soccer boot using surfacing techniques. These are the cleats worn in 2018 by Luis Suarez and Mohamed Salah, among others. The preferred software for this tutorial is Solidworks but any program with comparable surfacing techniques such as CATIA, Rhinoceros and Alias will work. It is an intermediate course because we are touching on advanced surfacing techniques but only develop a basic model of the shoe that can be developed much further.

Weapon design

22 1 Intermediate
I have created weapon design on fusion 360

AutoCAD | Working with layout view

15 1 Intermediate
In this tutorial video, you can treat your layout as a sheet of paper upon which you can arrange the parts of your drawing systematically, as well as add annotations and other details before creating the final output.

How to FDM Print for Part Sliding Clearance

13 3 Intermediate
If you are 3D printing parts that have to fit/slide together after printing, you will need to put some sort of clearance between those parts in your CAD system. A good starting place is a clearance 2x the layer height you are going to print at, but you should make a few smaller test prints at different clearances to see if the 2x layer height rule holds for your particular situation and orientation. Have fun and happy printing!

Creating a pipe that bends in multiple directions at once in Autodesk Inventor

13 0 Intermediate
Creating a pipe that bends in multiple directions, with the use of 3D sketch

How to Insert a Z Pause in a Stratasys Printer

12 0 Intermediate
How do I use a Stratasys printer with multiple materials? Multiple colors? How do I add metal inserts in my 3D printed part? This tutorial explains how to use Stratasys software to insert pauses (Z-pause) during an FDM print job, to change materials, colors or to add metal inserts. Go to Step 1 for some documentation and examples of parts printed with Z Pause.

CATIA TUTORIAL GSD: Panton Chair - How to model in CATIA

12 0 Intermediate
How to Model a Panton Chair in CATIA? In This CATIA tutorial I will show you how to model the famous Panton Chair in CATIA.

How to Paint an FDM Printed Part

12 2 Intermediate
This tutorial will teach you how to paint FDM parts. There are many reasons to paint 3D printed parts, whether it’s for UV protection, sealing or just to make them aesthetically pleasing.

Create a Simple Nut By Using PTC Creo Parametric 3.0

12 3 Intermediate
How to create a simple nut in PTC Creo Parametric 3.0 ???

How to create Rack & Pinion using Inventor 2016

11 0 Intermediate
How to create Rack & Pinion with Inventor 2016 and show the motion??? Step by Step tutorial .... follow the link below https://www.youtube.com/playlist?list=PLCrNndUdp-R2RXvptMFVptVGuLDD0NV2f

Car (buggy) motion study in solidworks

11 2 Intermediate
Car runs on hilly road smoothly.

Hand Sanding and Polishing for PolyJet 3D Printed Parts

11 1 Intermediate
Sanding and polishing 3D prints can be tricky. This tutorial demonstrates how to handle post-processing for printed parts when using the Stratasys J750.