Tutorials

Small

Create EYE Bolt Using Inventor

1 3 Intermediate
Create EYE Bolt Using Inventor
Small

How to do a Basic Linear Finite Element Analysis in CATIA V5

1 2 Intermediate
After this tutorial, hopefully you will be able to do a simple linear analysis using FEM (Finite Element Method). The steps are straight forward and the part used is available in my profile (foot peg - ATV). The idea behind this is seeing how it reacts to a Pressure of 125 KPa. All the units in this tutorials are in the IS (International System) but i will put the conversions Metric-Imperial. IF YOU HAVE ANY DOUBTS SUCH AS WHERE ARE THE COMMANDS LOCATED DON'T HESITATE TO CONTACT ME. Pedro José Silva Campos
Small

SolidWorks tutorial 3D MODELING FROM BLUEPRINTS Transmission Gear

2 0 Intermediate
SolidWorks tutorial 3D MODELING FROM BLUEPRINTS Transmission Gear 3D Modeling: Learn key techniques and tools to design parts Features to be used: Revolved Boss/Base, Fillet, Extruded-Cut, Boss-Extrude, Circular Pattern
Small

3D MODELING FROM BLUEPRINTS SolidWorks tutorial EXERCISE 8

1 0 Intermediate
SolidWorks tutorial 3D MODELING FROM BLUEPRINTS Exercise 8 3D Modeling: Learn key techniques and tools to design parts Features to be used: Boss-Extrude, Extruded-Cut, Reference Geometry - Plane, Fillet, Hole Wizard,
Small

Marzouk SolidWorks - All About Advanced Sketching - 20 Videos Playlist - More Than 8 Hours

0 0 Intermediate
All About Advanced Sketching 20 Videos Playlist More Than 8 Hours
Small

Marzouk SolidWorks - Multiple Leaf Friction Clutch ( 4 Hours Complete Project )

0 0 Intermediate
Detailed Design of Parts , Assembly , Drawing , Exploded View & Animation of Multiple Leaf Friction Clutch
Small

3D MODELING FROM BLUEPRINTS SolidWorks tutorial CRANKCASE

0 0 Intermediate
CRANKCASE 3D MODELING FROM BLUEPRINTS SolidWorks tutorial 3D Modeling: Learn key techniques and tools to design parts Features to be used: Boss-Extrude, Extruded-Cut Thin, Revolved-Cut, Extruded-Cut, Circilar Pattern, Hole Wizard, Chamfer, Fillet,
Small

How to create helix along curve

1 0 Intermediate
When a Helix command is used in CATIA, a line has to be selected as an axis. To create a helix curve along any curve, not only a straight line, follow these steps.
Small

CATIA V5 DMU FITTING PATH FINDER

0 0 Intermediate
Catia V5 DMU Fitting Path Finder for automatically generate path without fouling with nearby objects.
Small

CatiaV5 DMU Fitting Simulation Rubiks Cube

0 0 Intermediate
Rubik's Cube 3D modeling & DMU Fitting Simulation Using Catia V5 . Watch Video For Basic Understanding of DMU Fitting Workbench.
Small

Kinetic Sculpture SolidWorks and Visualize Tutorial Part 2

0 0 Intermediate
3D Modeling: Learn key techniques and tools to design parts Features to be used: Boss-Extrude, Revolved Boss/Base, Sweep Boss/Base, Extrude Cut, Fillet, Circular Pattern, Helix/ Spiral Apply appearances Assemblies: Combine your part designs into 3D assemblies Mating parts, use Mechanical Mates like GearMate Motion Study - Learn how to create a basic Motion Study within Motion Analysis and then perform a simulation calculation Save Animation Rendering using Visualize: Import Assembly in Visualize Apply appearances Camera Environmental Final rendering using GPU
Small

Kinetic Sculpture SolidWorks and Visualize Tutorial Part 1

4 0 Intermediate
3D Modeling: Learn key techniques and tools to design parts Features to be used: Boss-Extrude, Revolved Boss/Base, Sweep Boss/Base, Extrude Cut, Fillet, Circular Pattern, Helix/ Spiral Apply appearances Assemblies: Combine your part designs into 3D assemblies Mating parts, use Mechanical Mates like GearMate Motion Study - Learn how to create a basic Motion Study within Motion Analysis and then perform a simulation calculation Save Animation Rendering using Visualize: Import Assembly in Visualize Apply appearances Camera Environmental Final rendering using GPU
Small

How to create spur gear in Siemens NX?

1 0 Intermediate
This tutorial presents the modeling of an external spur gear in Siemens NX. The detailed modeling process is demonstrated on this video: https://youtu.be/pVPjDyOn6R4
Small

Basketball Ball Solidworks and Visualize Tutorial Part 2

1 0 Intermediate
Basketball Ball Solidworks - Visualize Tutorial Part 2 https://youtu.be/wTbhCHBm2TU https://grabcad.com/library/basketball-ball-solidworks-and-visualize-tutorial-1
Small

Basketball Ball Solidworks and Vizualize Tutorial Part 1

2 0 Intermediate
Basketball Ball Solidworks Tutorial Part 1 https://youtu.be/r1DKX6aT-No https://grabcad.com/library/basketball-ball-solidworks-and-visualize-tutorial-1
Missing_small

Modeling from Difficult Drawings SolidWorks Tutorial

0 0 Intermediate
https://youtu.be/94aIlRJ-e2k
Missing_small

How to Assembly Francis Turbine in SolidWorks

0 0 Intermediate
https://youtu.be/QexNEdmQyUg
Missing_small

Very easy way to Make Crane Hook

0 0 Intermediate
https://youtu.be/DxjSUKbA6Ng
Small

How to create deformable seals in Siemens NX?

1 0 Intermediate
In this tutorial the modeling of deformable seal will be shown. To see how its work here you can find a video presentation: https://www.youtube.com/watch?v=leGb1BiB--0
Small

How to create an ellipse without using Ellipse command in solidworks?

2 0 Intermediate
In this, I will show you how to draw ellipse in solidworks without ellipse command.
Missing_small

CATIA v5 Modeling turorial

0 1 Intermediate
this is the amazing tutorial for every CATIA designer which contains different operations like 3D Text adding
Small

Spring in SolidWorks

8 5 Intermediate
In this tutorial i will make a torsion spring the same as you can see in my models. I hope it will be halpefull for you.
Small

Creation of twisted wire

0 0 Intermediate
How to create a twisted pair of wires in Creo?
Small

How to simulate a mechanism in ADAMS

0 1 Intermediate
In this tutorial I show you how to make a mechanism & give the initial conditions & simulate it in ADAMS & how to get desired diagrams .
Small

PLASTIC BOTTLE DESIGN

3 0 Intermediate
See video: https://www.youtube.com/watch?v=5ErOKkcZXWc&ab_channel=ManuelValenzuela
Missing_small

Tutorial 86: Full ANSYS ACP tutorial

6 1 Intermediate
Composite materials are created by combining two or more layered materials, each with different properties. These materials have become a standard for products that are both light and strong. Composites provide enough flexibility so products with complex shapes, such as boat hulls and surfboards, can be easily manufactured. Engineering layered composites involves complex definitions that include numerous layers, materials, thicknesses and orientations. The engineering challenge is to predict how well the finished product will perform under real-world working conditions. This involves considering stresses and deformations as well as a range of failure criteria. ANSYS Composite PrepPost provides all necessary functionalities for the analysis of layered composite structures.
Missing_small

How To Do FEA of Welded Component In CATIA V5?

0 0 Intermediate
Check Below Link ! https://www.youtube.com/watch?v=gyE4q5IcJfs
Small

Tutorial 82: Natural Frequencies and Mode Shape of Composite Plate with Hole

1 0 Intermediate
The modal analysis technique is used to determine the vibration characteristics (I,e, Natural frequencies and mode shapes) of linear elastic structures. Our goal is to determine the first 10 natural frequencies and mode shapes for the plate with the hole shown. In this tutorial, first we are going to model simple plate with hole in ACP tools then we are importing model into modal. In the next step, we will have short introduction to modal tools in ANSYS software and do simulation to find natural frequencies and mode shape of composite model. Agenda:  Creating Plate with Hole in ACP  Importing ACP model into modal analysis  Applying boundary conditions  Finding mode shapes
Small

Tutorial 79: Stress Analysis of Composite T-beam

2 0 Intermediate
Composite fracture occurs at three modes, depending on three loading scenarios. Mode I is an opening or tensile mode, mode II fractures consist of a sliding or shear effect and mode III fractures occur due to a tearing or shear loading effect. This report will only be looking at fracture modes of type I and II. In practical occurrences of material fracture caused by cracking, especially in metals, mode I type of fracture is predominantly present. Agenda:  Set up properties for delaminating interfaces inside engineering data  define delaminating interfaces inside ACP  Use predefined interfaces from ACP inside Mechanical  Alternatively use contact definitions with cohesive zone material inside Mechanical  Boundary conditions and analysis settings  Postprocessing
Small

Tutorial 78: Stress Analysis of Composite T-beam

2 0 Intermediate
ACP has a pre- and post-processing mode. In the pre-processing mode, all composite definitions can be created and are mapped to the geometry (FE mesh). These composite definitions are transferred to the FE model and the solver input file. In the post-processing mode, after a completed solution and the import of the result file(s), post-processing results (failure, safety, strains and stresses) can be evaluated and visualized. After a completed solution, the post-processing is used to evaluate the performance of the design and laminate. The post-processing functionality for Solid Models of ACP allows the mapping of ply wise results on to the reference surface of the solid model. This ensures that also failures occurring inside the laminate can be observed and investigated. Failure criteria are used to evaluate the strength of a composite structure. Several failure criteria can be defined, combined and configured in the Definitions object. Failure criteria definitions can be used for failure plots and sampling points. The critical failure mode for an element shown in failure plots and sampling points is the one with the lowest reserve factor. Agenda  Connecting ACP to Static Structural Tools in Ansys  Doing Stress Analysis  Solving the model  Analyzing Data in static Sturcutal  Analyzing Data in Post-Processing