Tutorials

Part 1: A Look at Color Proofing

10 0 Beginner
This tutorial gives some background on color proofing and explains what to do when the color you print doesn't match the color you chose on screen. There will be future tutorials that expand on the topics mentioned here.

Stacking Your Parts in Z for FDM

2 0 Intermediate
Have long thin flat parts you’ve always wanted to print right on top of each other in FDM but the slicer never allowed you to? Learn how to use this exclusive new feature in GrabCAD Print Pro!

JP_011_GrabCAD Print: 「マットかグロス?」3D造形でどのような場合にどちらの仕上げを使用すればよいのか

1 0 Beginner
マット(艶消し)にするか、それともグロッシー(光沢)にするか、それが今回のテーマです。 PolyJetプリンタをお使いの皆さんは、部品をマット仕上げにすべきか、グロッシー仕上げにすべきかで悩むことがよくあります。 皆さんが頭を悩ませるのも無理ありません。それ以外の点はまったく同じの2個の部品でも、仕上げのタイプが異なると、見た目、感触、色、そして強度や耐久性までもががらりと変わってしまう可能性があるのです。どちらの仕上げにもそれぞれ、考慮すべき独自のメリットと影響があります。 このチュートリアルでは、マット仕上げとグロッシー仕上げの概要を説明し、それぞれの長所と短所を比較し、それぞれのタイプがどのような仕上がりにつながるのかを明確に示す例を紹介します。そして最後に、どのような場合にどちらの仕上げを使用すればよいのかを簡単に分類してまとめとします。

GrabCAD Print Pro™ - Per Part Groups For Service Bureaus

1 0 Expert
The premium version of GrabCAD Print™, GrabCAD Print Pro™ is now available! This version includes new & enhanced features. This tutorial will explain per part estimation & assembly grouping!

JP_005_GrabCAD Print: 部品摺動部の隙間をFDM造形する方法

0 0 Intermediate
造形後にはめ合わせるまたは摺動(スライド)させる必要がある部品を3D造形する場合、CADシステムで該当する部品の間にある程度の隙間を設ける必要があります。目安として、造形する際の積層ピッチの2倍の隙間から始めるとよいでしょう。ただし、小さいサイズで何度かテスト造形を行い、積層ピッチの2倍の法則が特定の状況や向きに当てはまるかを確認することをお勧めします。それでは3Dプリンタで楽しくモノづくりをしていきましょう!

How to Manage Printer Materials in GrabCAD Shop

0 0 Beginner
GrabCAD Shop allows users to manage their 3D printer materials via the Admin Console and the shop itself as an operator. Please note that only admins have access to the Admin Console.