Tutorials

Reverse Engineering with Siemens NX 12

5 2 Beginner
How to use Siemens NX 12 Reverse Engineering Funktions to treat your 3d Scan result failures and errors.

Siemens NX 12.0 - Sheet Metal Tutorial 1

3 0 Intermediate
Hello everyone, I designed a sheet metal part by using Siemens NX, see you in the future with more basic examples and more difficult parts! I hope this tutorial video will be benefit to you:) to download pdf doc and CAD data : https://grabcad.com/library/siemens-nx-sheet-metal-part-design-example-1-1

Auto Ballooning NX2007 (2022)

1 0 Intermediate
Hello Everybody, Welcome to Mech Dezignz. Today we will se how to add part list and add ballooning to the views in assembly. So lets begin... So this is in assembly format. So that we can do ballooning and drafting partwise... First of all we will go to drafting... So after putting the view we will go to part list... To set the length of the table we have to go to part list properties... So by increasing the height the contents can be adjusted in single table... Now for ballooning, we can add the auto balloon to any view which have been imported... So by right clicking and choosing show balloon we can do auto ballooning... We can adjust the balloons as required by stretching or double clicking to add or modify contents... Since this is latest NX some commands may be different than older version... Any queries can be carried on to the comments section... Thanks Have a nice day...

Bend pipe design in nx

1 0 Beginner
In this tutorial, u will know about how to design bend pipe in nx software

Tube co-ordinates in 3D NX

0 0 Intermediate
Good evening Everybody... Today We will see how to find intersection points in 3D model... This could be useful in reverse engineering and model correction... Ok then lets start the video... First we will make points and lines from the model as showing now... So we have made centre lines as in model... Now we will make instersecting points for the model... So the points have been created... The co-ordinates of these points are used in bending program as well... So lets see how to find co-ordinates of these points... This is how the co-ordinates of intersection points are taken in 3D model... Thanks...