Tutorials

  • Autodesk Inventor ×
Small

TUTORIAL 2: Inventor / KeyCreator

0 0 Beginner
See video: https://youtu.be/7eemvXbsCBg Do you really like parametric CADs??
Small

Extruded boss on the sphere - ADESK INVENTOR - Exercise - 2D into 3D Modeling

0 0 Beginner
In this guide are displayed ADESK INVENTOR steps that are required for extruded boss to the sphere surface and modeling of the overall model based on technical drawings. 2D into 3D solid modeling. Example of exercise.
Small

Extruded boss on the sphere - Autodesk INVENTOR

0 0 Beginner
In this guide are displayed steps that are required for extruded boss to the sphere surface for beginners in ADESK INVENTOR.
Small

Modelling of Impeller

2 2 Beginner
Modelling of Impeller
Small

Create EYE Bolt Using Inventor

1 3 Intermediate
Create EYE Bolt Using Inventor
Small

Create a Differential Drive

2 0 Beginner
Create a Differential Drive
Small

Modelling of Piping Part

0 0 Beginner
Use for connecting two pipe at rectangle.
Missing_small

Pantograf

0 1 Beginner
I created this project, as homework at :„Proiectare 3D Parametrică 1”, Masterat IAAC, IMST-UPB, Universitary year 2016-2017. I made this project in INVENTOR 2015. The starting point of this project was: https://www.youtube.com/watch?v=oWQ2K6HjP_w&feature=youtu.be You can see the assembling animation here:https://youtu.be/t1drcxyktJs You can see the functioning animation here: https://youtu.be/QHBBkQ5zLl4
Small

Como dimensionar la matriz y los punzones de un troquel de corte

0 0 Expert
Con este tutorial pretendemos explicar como dimensionar la matriz y los punzones de un troquel de corte, garantizando la tolerancia de fabricación de la pieza así como logrando la mayor vida útil del troquel.
Small

How to Make a Thread Generator with Inventor

3 0 Intermediate
En este turorial de imágenes muestro como hice el macho de roscar con Autodesk Inventor
Small

How to Create a Gear?

3 0 Intermediate
How to Create a Gear?
Small

Inventor Multi-Body Parts Tutorial

0 0 Intermediate
Create a Reinforced Vacuum Hose which is a Multi-Body part of a clear hose with a wire molded inside.
Small

How to Create a Spiral ?

0 1 Intermediate
How to Create a Spiral ? ~ Inventor
Small

From GRABCAD to INVENTOR

2 2 Intermediate
Download files from GRABCAD and edit it in INVENTOR Link: https://youtu.be/UasZ2dt37AU
Small

How to export b.o.m. to excel temp?

0 0 Intermediate
The only way I know of that Inventor can export to excel is with the Export BOM tool once you finish making the BOM in the idw. You can use the tool I have highlighted in the image to bring up the column chooser tool which will let you choose exactly what columns to display. As for exporting a header per assembly, there is no tool inventor has that I'm aware of. There isn't a temp. style that can really work with it either. I'm sorry I couldn't be of too much more help.
Small

How to Prepare STL files in Autodesk Inventor

1 0 Intermediate
Autodesk Inventor allows you to save both individual parts and assemblies in STL format, at all design levels. This details how to save out all parts and assemblies.
Small

How to animate flexible pipes in Inventor?

0 0 Intermediate
"Quick" tutorial... All tutorials are slow! Very slow! Just to do model faster, then write "How to".. :-)
Small

How to use Gear Generator in Autodesk Inventor 2016

0 0 Intermediate
Will be more clear, if you'll upload screenshots! Seem that you put wrong digits there...
Small

Autodesk Inventor - How to cut Irregular Helical Groove

0 1 Intermediate
See tutorial below
Small

How to model a Control lever shaft using Inventor 2014?

0 1 Intermediate
We have to abide all conditions from the technical drawing. Here is the first answer from a total of 5 answers, summarizing 35 steps. The rest of steps are included in the other 4 answers which follows here, as well. So, if you are really interested in modeling with Inventor 2014, try to apply every steps in respect of their order and watch how you reach the model. Enjoy!
Small

How to model a Centrifugal Pump Body (Inventor 2014) - Spiral construction - Page 6/8

0 0 Intermediate
Sir, I am sorry to say that I am doing exactly as you described, but the flange in the middle of the solid 2 is not created. I am attaching a picture. This is the result of my extrude.
Small

How to model a Centrifugal Pump Body (Spiral construction) using Inventor 2014?

0 0 Intermediate
We have to abide all the conditions from the technical drawing
Small

How to model a rope in Autodesk Inventor?

0 2 Intermediate
marian, What about SWEEP / TWIST command? You can find it under the menu; 3D MODEL / Sweep / Sweep / Twist You can
Small

How to model a rope in Autodesk Inventor?

1 0 Intermediate
Hi Marian, I will try to describe how I model a rope in Rhino instead of Autodesk Inventor. I am sure you can adopt these steps to Autodesk Inventor. The commands that you will need will beas follows; Twist Flow (along curve)
Small

How to model a rope in Autodesk Inventor?

0 0 Intermediate
a rope like this.
Small

Why does AutoDesk Inventor save mirrored components in an assembly as a seperate file?!

0 0 Intermediate
there are two way to mirror parts in asembly.. Reuse and Recreate. If you choose reuse , inventor doesn't create a new part.. After you choose the parts (that will be mirrored) you must click the yellow icon..
Small

Hydraulic cylinder help

0 0 Intermediate
Under the option Constrain use Type Mate and join two surfaces facing each other (inner bottom of cylinder and piston head) then use options under slide bar called Limits and type the limit dimensions. Minimum is zero position () when the piston is set completely inside of cylinder) and maximum is a stroke of the piston piston.
Small

How to make decals on airplane with Autodesk Inventor?

0 0 Intermediate
example
Small

How can I change the orientation of the second ipt when I`m using combine command?

0 0 Intermediate
And the second I prefer to use this way : - Create 2 separate parts - Create a new assembly file and insert them into assembly file And arrange by constrain command. save it. - Finally create new part and use drive command to insert assembly file into the part file USE DRIVE COMMAND AS I SHOW IT ( see picture) Note : if you change any part's situation in assembly file the last part will update automatically. HAVE FUN.
Small

How can I change the orientation of the second ipt when I`m using combine command?

0 0 Intermediate
Hi Rolo I have two suggestions for you. Using move bodies command as show by pics.