I Built a Military Robot

30 5 Intermediate
Mobile, military robot optimized for use in desert environments which can be controlled remotely or autonomously and can collect/ stream video to a VR headset via its front mounted camera. The method of movement is a continuous track, created using steel roller chain connected by fasteners with 3D printed links. These loops sit on a custom designed drive sprocket and idler sprocket with 4 shock absorber loaded roller pins that act as the suspension system. The drive motors are powered by '18650' batteries, directed by a raspberry pi 4 and connected to a motor controller. For connectivity, a mobile device can connect to the pi's external antenna as it is a WiFi access point. From here, directions can be sent to the robot from the mobile device using the Node Red GUI and additionally, the entirety of the main raspberry pi computer can be accessed for the use of sending custom commands for autonomous movement.

Weapon design

22 1 Intermediate
I have created weapon design on fusion 360

Dice Modelling using Fusion 360.

6 0 Beginner
Dice design using Autodesk Fusion 360 , ready for 3D printing. Step wise instructions for beginners of Fusion 360. Enjoy and Keep learning :) Let me know if you have any queries or question.

How to design your own support structures for FDM printing

4 1 Intermediate
See below for a method to manually model support structures.

3D Printed MeanWell Power Supply Bracket for Creality Ender 3: Fusion 360 Tutorial in Modeling Parts

4 0 Beginner
#3DPrint #3DPrinting #Ender3 (Material presented is for entertainment purposes only. I am not responsible for any injury or damage caused by installation, use or misuse of these devices.) We will model and assemble our own 3D printed brackets that allow the MeanWell power supply to be attached to the underside of the Ikea Lack table.

mesh using pipe comment in autodesk fusion360

3 0 Intermediate
here you can find how to make a steped mesh using pipe comment in fusion360

3D Sketch

3 0 Beginner
3D Sketch | Autodesk Fusion360|

Fusion 360 tutorial: Sculpting (Lighter Case)

3 0 Intermediate
This Fusion 360 tutorial will teach You how to sculpt, create a sketch and many more! Easy, step by step...

Turbine Blade - Fusion 360 Tutorial

3 0 Intermediate
This video show step by step how to create the 3D model of the turbine blade, i used the coil to captured the sipral 3D path for guide to create the blade. Disclaimer : this video just to show the method to create the 3D model, the design and dimensions itself doesn't reflect on the real turbine blade.

Bottle holder - Fusion 360 tutorial

2 0 Intermediate
This video to continue the previous video, which in this video demonstrate how this wire type of bottle holder was created. use many technique to create the 3d surface and use it to create the pipe command from the edges of the surface.

Knurling modeling in Fusion360

2 1 Beginner
Knurling modeling in Fusion360

Sheet Metal bend fold unfold in Autodesk Fusion 360

2 0 Beginner
Hi Guys, In this video, I am going to tell you that how can you Learn Sheet Metal bend fold unfold in Autodesk Fusion 360. I have taught you how to Learn Sheet Metal bend fold unfold in Autodesk Fusion 360, which will make you understand in simple way. If you want to learn Fusion 360 software and If you want more tutorials, Then you can also subscribe my Youtube Channel, Whose link I have given you below. My Youtube Channel Name is: Ahuja Technical Hant https://www.youtube.com/channel/UClh7lX8d70gIwoA7z5Tt2Yg https://youtu.be/BinANRlCG2A

Re-Designing The Nozzle Cooling Duct on Ender 3/ Sovol SV1 in Fusion 360: Tutorial in Modeling Parts

2 0 Beginner
We will be redesigning the air scoop to work more effectively.

How to Use Threaded Inserts in Your 3D Printed Parts- Example with DC Motor in Fusion 360

2 2 Beginner
This tutorial illustrates the modeling and use of threaded bras inserts in 3d printed parts and set screws to clamp down on DC motor flats.

chuck key design using fusion360

2 0 Beginner