Tutorials

  • NX Unigraphics ×
Small

Intersection Curve Siemens Nx 10

0 1 Beginner
Intersection Curve Create a curve at the intersection of two unique sets of objects.
Small

Project Curve Siemens Nx 10

0 1 Beginner
Project Curve
Missing_small

How to Create a split mould in NX?

0 0 Beginner
Video shows how to create a multi core mould in Unigraphics
Small

Nx 10 Sketch Creating Constraints Automatically Lesson 1.2

0 0 Beginner
This is a good method to use when applying geometric constraints to objects added to the sketch. The geometry is analyzed and geometric constraints are created based on the tolerances at the bottom of the dialog. Parts https://doc-0o-9o-docs.googleusercontent.com/docs/securesc/31edu1jlvkgun411q5g14oqbsj2v7us6/5lqs65c5j1arc89mtmhnvbb6r3a2udvh/1489248000000/05663580844508130033/05663580844508130033/0B1mOa-901OYmUWJneG0yRnBwMlU?e=download
Small

NX 10 Sketch Derived Lines(Creating an Offset Line Parallel at a Distance) Lesson 1.1

0 0 Beginner
Offset a sketch line, edge or curve a constant distance. Create a bisected line between two non-parallel lines. Create a parallel line halfway between two parallel lines.
Small

NX 10 Sketch Rectangle (Creating a Rectangle Using 'By 2 Points') Lesson 1.0

1 0 Beginner
There are three methods of creating a rectangle: By 2 Points By 3 Points By Center The first method is similar to the Rectangle command outside of the Sketch task environment, creating lines parallel to the X- and Y axes of the Sketch coordinate system. The other two methods allow you to create lines that are not parallel the sketch axes. Regardless of the method used, the lines created are perpendicular to each other.
Small

How to create spur gear in Siemens NX?

1 0 Intermediate
This tutorial presents the modeling of an external spur gear in Siemens NX. The detailed modeling process is demonstrated on this video: https://youtu.be/pVPjDyOn6R4
Missing_small

HOW TO REVOLVE - EXPERT GUIDE

0 0 Beginner
https://www.youtube.com/watch?v=YnIWMTHApu4
Small

How to create deformable seals in Siemens NX?

1 0 Intermediate
In this tutorial the modeling of deformable seal will be shown. To see how its work here you can find a video presentation: https://www.youtube.com/watch?v=leGb1BiB--0
Missing_small

How to draw Hexagonal Nut In NX Unigraphics?

1 0 Beginner
In this tutorial I will show, how to draw a simple hexagonal nut in NX Unigraphics.
Small

Tutorial on Casting- Machining with link in NX

2 1 Expert
Tutorial on Casting- Machining with link in NX
Missing_small

How to import points from MS Excel in NX?

0 0 Beginner
Use these scripts to import 3D coordinates from MS Excel file into NX model (unfortunately sample script and files attachments not allowed).
Small

How to create break-out section view in Siemens PLM NX?

1 1 Beginner
In this two videos you can see two different solutions for the break-out view creation in NX version 10.
Small

How to extrude a text in NX

2 0 Beginner
In this tutorial you will be able to extrude a text and make the text solid.
Missing_small

siemens nx tutorials how to use through curve mesh command

0 0 Beginner
Through Curve Mesh command use to create a body through a mesh of sections in one direction, and guides in another direction, where the shape fits through the mesh of curves. In this tutorials we will show how to use through curve mesh command in unigraphics ug nx.
Missing_small

NX surface tutorials: how to use N Sided Surface command

0 0 Beginner
N-Sided Surface command use to create a surface enclosed by a set of end-connected curves. In this tutorials, we will show how to use N-Sided Surface command in unigraphics ug nx, siemens nx,
Small

Tutorial - How to make a flexible hose in siemens nx

0 0 Intermediate
Another user wish - a flexible tube. I used a circular section surface, some expressions and lawcurves.
Missing_small

Tutorial 36: How to import simulation data in NX 9 Siemens Nastaran after saving file

0 0 Beginner
Please check youtube link: https://www.youtube.com/watch?v=knr-nOEIAug
Small

How to make this to thickness?

0 0 Intermediate
Hi Amrendra, Please see the attached presentation. I hope to be useful for you. Good luck! Sebi
Small

how to create detail thread on conical face?

0 0 Intermediate
If I understand your request correctly - you could just create your helix then project it onto your surface. Then reverse the helix and join with the one you just projected and check tangency.
Small

How to make the sketch plane normal to the view in NX when sketching

0 0 Intermediate
Hi, There are two ways (or more ?) to obtain the "Sketch View". Anyway the simple method is the native NX shortcut Shift + F8. The menu tools are the following:
Small

How to Intersection curve Facet model with surface?

0 0 Intermediate
Hi, I had this problem after several years working in ProE / WF. In UG/NX the philosophy is different. Usually the intersection between any curve and any surface is one or more points. (It can be an other curve(s) if one or more portion(s) of curve they are included in the surface but this is other case.) Therefore these intersection(s) are obtained by creating a point / point set using "Intersection" option. I hope to be clearer in the attached presentation. Good luck, Sebi
Small

How to create inclined plane in NX?

0 0 Intermediate
Plane creation
Small

How to create inclined plane in NX?

0 0 Intermediate
If you use 3D model in menu enter in "start" - modeling, after in menu - insert - datum/point - datum plane, open a box with many variable to insert your inclinated plan. See image in attached for NX8
Small

Tutorials: Video course in NX Realize Shape

0 1 Intermediate
5 Tutorials in NX Realize Shape
Small

Tutorial 26: composite buckling simulation in NX 9

0 0 Intermediate
hi
Small

Mold Design in NX 10

0 0 Intermediate
Mold Design in NX 10. Without Mold Wizard and fully parametric.
Small

As is adzed diamond for CAD?

0 0 Intermediate
You can specify any angle(cut) fo crystal(brilliant): 1.modify main scetch 2.modify is everyone polygon from scetch 3.modify is angle of rotation(it is curve to the intersection of two surfaces) 4. basic line segments should be tangential to the cone( basic is body of revolution)
Small

how to show all command in menu in nx 7.5 without command finder

0 0 Intermediate
Select roles from navigation panel(Right side of nx) Then select advanced with full menus.
Small

studio splines in nx

0 0 Intermediate
Hi Dipin, Plz refer the attachment..