Tutorials

Filling basic 6-sided holes in Rhino

5 0 Beginner
This tutorial shows how to fill a 6-sided hole surrounded by simple planar surface transitions in Rhino.

Video Tutorials from Rhino 3D Tutorials

4 0 Beginner
A series of little tutorials made available on my Youtube channel. For more detailed Rhino 3D tutorials here's the link https://rhino-3d-classes-from-beginner-to-advanced-lev.teachable.com/

GIF : Guide to How to make Simple Single Collet ( Emerald Ring )

4 0 Intermediate
THE SERIES OF ANIMATED gif WILL GUIDE IN MAKING SIMPLET GRACEFUL RING.

The Length And Width Of A Ring .

3 0 Expert
How to measure the length and width of a ring . https://www.youtube.com/watch?v=0zKmm4ZYi10

How do i add thickness to a polyline in Rhinoceros 3D

3 2 Intermediate
hi https://grabcad.com/mark.goody-2, following picture can guide you to add thickness to any curves by adding few simple steps while modelling.

Introduction to Pave setting, and its basic knowledge.

3 0 Expert
What a Pave Setting Is The pavé setting, pronounced “pa-vay,” comes from the French word “to pave,” as in paved with diamonds. By closely setting small diamonds together with minimal visibility of the tiny metal beads or prongs holding the stones in place, the effect is one of continuous sparkle.

Make a Ring With Text in Rhino

3 1 Intermediate
Make a ring with a text

How to make pearl ring

2 0 Expert
How To Make Pearl Ring https://youtu.be/lOX9b2yBdHY https://www.youtube.com/watch?v=N8QDkjlSo-U https://www.youtube.com/watch?v=C8Wx8lGz68A&t=1s

Industrial shelter 12x4 meters (Rhinoceros)

2 0 Beginner
Industrial shelter 12 meter wide, 4 meters long and 2,97 meters total high (2,53 meters usable high from the front, and 2,88 meters from the back). Area is 48 m2. Uses 5 mm thick laser cut plates and the following tubes sizes (all in millimeters): 100x100x2 mm 80x40x2 mm Includes a link to YouTube with a video tutorial showing the design process from start to finish with Rhinoceros: https://youtu.be/6KgcZnYgpok

Split Ring Shank Design Modeling in Rhino 3D (2018): Jewelry CAD Design Tutorial #42

2 0 Intermediate
You will learn how to design a split ring with bead set on the ring shank in this tutorial. Suggested videos: Bezel Set tutorial ►►https://youtu.be/vuWBSxwdBw8 Halo Ring tutorial ►►https://youtu.be/VPT1LdA4vos Signet Ring tutorial ►► https://youtu.be/fsbqZH-hSlE Prong Set Tutorial ►► https://youtu.be/qxDI_7-tGHQ This tutorial is done by Rhino 6. The exact commands can be used with Rhino 5 and older version. PJ Chen Design Channel is about sharing Rhino 3D tutorials to students and professionals learning various Rhino 3D techniques. For more training course information that PJ Chen Design provides, Please visit our website at www.pjchendesign.com 👉 Share this video: https://youtu.be/BMoKZ-2JE2E 👉 Watch All FREE Video for Jewelry Design ►► https://goo.gl/aUPwz9 👉 Subscribe PJ Chen Design Channel ►► https://goo.gl/MJ4ExU 👉 Tell us what you like to learn about jewelry design ►► https://goo.gl/wAfJEJ ★☆★ If you found this video helpful, help me to spread the word by liking or commenting below. It helps me to reach more people and allow me to create more FREE videos! ★☆★ ✔ Like Our Facebook Page ►►https://www.facebook.com/pjchendesign/ ✔Visit Our Website ►► https://www.pjchendesign.com

Tutorial: How to make round diamond collet.

1 0 Intermediate
The series of jpegs will guide the way to make round collet

GOOD JOB

1 0 Beginner
HI

How do i add thickness to a polyline in Rhinoceros 3D

1 1 Intermediate
hi https://grabcad.com/mark.goody-2, following picture can guide you to add thickness to any curves by adding few simple steps while modelling.

How to make animation or Gif files by simple print commands and print-screen Tab

1 2 Intermediate
GIF is the collection of pictures that are put together in the series to for animation, its like filming a blossoming flower, with all the patients, we have to keep taking pictures from same distance and angel with movements happening in the object or zooming in the uniform ratio.

Filling basic 6-sided holes in Rhino (ver. 2)

1 0 Intermediate
This tutorial shows how to fill a 6-sided hole surrounded by simple planar surface transitions in Rhino.