Tutorials

Tutorial for Designing Engine case

179 38 Expert
This tutorial contains step by step procedure to create engine case using any software, this model especially created using CREO parametric Click here for my other files https://grabcad.com/tutorials/boolean-operations-powercopy-in-catia

3D Printing Design Guidelines

159 15 Beginner
3D Printing Design Guidelines ~ 9 Steps to consider while design for 3d Printing.

How to 3D Print Jigs & Fixtures, Part 2: Designing for Print

50 5 Beginner
This is the second part of a four-part tutorial series on how to optimize your manufacturing jigs & fixtures for 3D printing. Today, we'll go over what to do in each design pass as you're optimizing your part, including specific steps to do in your CAD package, your print-preparation tool, and if you're bold, your FEA package. Later installments of this series will deal with FDM material selection and post-processing for jigs & fixtures.

SOLIDWORKS Visualize 2019 Tutorial - How to Render A Spider Robot Motion Study as Realistic.

47 1 Expert
This Video Below Will Help You as a Beginner to know the Basics of Rendering Any Motion Study from SOLIDWORKS Software, Also Some Tricks inside Visualize will be explained after watching This VIDEO. If You Understand and Learnt Something New ... Please Like And Subscribe My New Channel (Prince EnGineer).. if You have any Question I'll Reply and Thanks For Watching Link: https://www.youtube.com/watch?v=PNJmwm6g1cA&t=123s

I Built a Military Robot

37 6 Intermediate
Mobile, military robot optimized for use in desert environments which can be controlled remotely or autonomously and can collect/ stream video to a VR headset via its front mounted camera. The method of movement is a continuous track, created using steel roller chain connected by fasteners with 3D printed links. These loops sit on a custom designed drive sprocket and idler sprocket with 4 shock absorber loaded roller pins that act as the suspension system. The drive motors are powered by '18650' batteries, directed by a raspberry pi 4 and connected to a motor controller. For connectivity, a mobile device can connect to the pi's external antenna as it is a WiFi access point. From here, directions can be sent to the robot from the mobile device using the Node Red GUI and additionally, the entirety of the main raspberry pi computer can be accessed for the use of sending custom commands for autonomous movement.

[Tutorial Video] SOLIDWORKS Create Role Motion.

36 1 Intermediate
This Tutorial I show how to create a part in context SOLIDWORKS for creating Role Motion use equation.

How to Use the Stratasys AR App for the J55 3D Printer

28 3 Beginner
Stratasys unveiled the new J55 full-color 3D printer last month. We wanted to give designers and industry professionals a chance to see it for yourself -- wherever you are -- by offering this augmented reality experience.

Solidworks 3d Curve Creation using Project Curve

27 4 Intermediate
Project curve is something every beginner get stuck into. Apart from visualizing, it is hard to figure out as how it gets projected. The video is about understanding the project curve's use.

How to go from GPS Data to Full Colour 3D Model

25 4 Expert
Got a large dataset you want to visualize in 3D? Let's take a look at the steps involved from going from just a spreadsheet to full colour 3D.

Weapon design

24 1 Intermediate
I have created weapon design on fusion 360

Adidas X18+ Soccer Boot Surfacing

22 1 Intermediate
We are going to learn to model the Adidas X18+ soccer boot using surfacing techniques. These are the cleats worn in 2018 by Luis Suarez and Mohamed Salah, among others. The preferred software for this tutorial is Solidworks but any program with comparable surfacing techniques such as CATIA, Rhinoceros and Alias will work. It is an intermediate course because we are touching on advanced surfacing techniques but only develop a basic model of the shoe that can be developed much further.

Solid works Beginner Course

21 0 Beginner
Engineering Services All About Engineering Software's . SolidWorks Beginning Start up Tutorials. In these tutorials you'll learn basic commands and via simple video demonstration.

STLs and 3D Printing for PolyJet

19 0 Beginner
This tutorial is the first part of our series about how to prepare and optimize settings for mesh file types supported by GrabCAD Print (GCP). The tutorial explains the building blocks of 3D printing with PolyJet. We will explain the conversion process from a CAD file to an STL file and how to optimize it to achieve the best print results possible. Future tutorials in this series will then explain more advanced types of files and operations.

How to make 3D posts of your models on Facebook

17 4 Beginner
Facebook has just updated their new feature that enables 3D viewing in posts... This feature has been around for some time, but the new update supports the industry-standard glTF 2.0 file format. This allows us to share 3D content on Facebook, whichever the designing software used was. Here I'll show you how to turn your 3D files into GLB, the only extension Facebook reads till now. By the way, GLB file format is a binary form of glTF that includes textures instead of referencing them as external images, so don't worry about the output's quality.

Dialing in a filament and specifying the Max Volumetric E(xtrusion) value

17 3 Beginner
The purpose of this tutorial is to accompany a video I did for our students as to how to dial in a filament the video is here https://www.youtube.com/watch?v=kugqYO-Jang&t=130s