Tutorials

Small

How to change default unit system in SolidWorks

35 8 Beginner
In this tutorial i will show you how to change units permanently in Solidworks.
Small

[Tutorial Video] automatic door closer system,3d and working principle

5 2 Beginner
this tutorial shows how a door closer system works I is modeled in solidworks 2018
Small

How to Change Default Unit System in Solidworks

4 0 Beginner
In this tutorial I will show you how to change units permanently in Solidworks 2015. My operating system is Windows 10.
Small

Design and Assembly of Rocker Bogie Suspension system

3 0 Beginner
3D modeling from scratch of Rocker Bogie Suspension system
Small

Kinematic Simulation

3 0 Beginner
https://youtu.be/2LYuUiNT5x4 Short Tutorial / Demonstration of a animation of a Piston nechanism in CATIA Mechanical Systems Design & Experience application in the 3DExperience platform
Small

3D PRINTING OF A GEAR DESIGN IN SOLIDWORKS USING ULTIMAKER 2+ EXTENSION

2 1 Beginner
THIS TUTORIAL WILL SHOW YOU HOW TO LEAVE FROM SOLIDWORKS TO 3D PRINTING OF A GEAR AND ALSO HOW TO CONVERT TO STL, GENERATE THE GCODE
Small

Understanding the Coordinate Systems in NX|CSYS

1 0 Beginner
Understanding the Coordinate Systems in NX 1.Absolute Coordinate System 2.Work Coordinate System 3.Datum Coordinate System https://youtu.be/dzHOJFQ41Z8
Small

Axis system for CATIA V5

1 0 Beginner
Catia Settings for Axis System. In this guide is displayed how to set a default axis system and how to set size axis on the display.
Small

Catia Part Design tutorial for beginner | How To Change Axis System Position

0 0 Beginner
For more content like this visit Our Site ; 👉 www.thesavvyengineer.com Our Youtube Channel ; 👉 The savvy Engineer : https://bit.ly/2Caeqac
Missing small

How to see System Variables list in DraftSight ?

0 0 Intermediate
Use SETVARIABLE command .
Small

Video Tutorial on Modeling Simple Conveyor System in SolidWorks

0 0 Beginner
Video Tutorial on Modeling Simple Conveyor System in SolidWorks
Missing small

Guiding System Of an Injection Mold

0 0 Beginner
Guiding System: Guiding system of injection mold works as guides to ensure precise mechanic movements. Generally the standard mold base all have guiding design, like guide pins between cavity side and core side, mold designers can just choose the proper mold base. Typical mold guiding system include, guiding between A/B plates, guiding for stripper plates, guiding for runner plates, guiding for ejector pins. All this guiding system can be customized when you order the mold base. But when the parts have particular structure and require high precision, this customized guiding system might not be enough, the guiding pins could not perform as well as before after a long time running, so injection mold designers should consider special guiding design besides these customized guiding design on the mold base. Precision guiding components have been standardized, such as tapered dowel pins, side lock, etc. some precision guided positioning device must be designed according to the specific structure of the injection mold.
Small

ANSYS Mechanical Heat Transfer-1.4 (Radiating System)

0 0 Expert
An aluminum section of a fin and tube heat exchanger is analyzed. An axially symmetric structure, a 90-degree section will be modeled to evaluate the impact of heat losses due to each mode of heat transfer.