Exciting engineering challenges with great prizes

Show off your skills and solve real design problems

Nokia Lumia Accessory Design Challenge

Create a cool, new wireless charging case or accessory for the Nokia Lumia 820 cell phone.

Nokia designs, manufactures and sells mobile phones throughout the world. What if the World could design something for Nokia? The aim of this Design Challenge is to invite GrabCADrs to develop an accessory that matches the wireless charging designs found here.

Nokia has been pushing for wireless charging as an inbuilt function on all of their phones. What designs can you develop for their charging products? What would you like millions of Nokia Lumia 820 users have a chance to see and buy?

Many people would love to have a Qwerty keyboard - can you integrate their Qi Wireless charging system in this case? How about a waterproof 820 case for listening (and charging) your Lumia while you shower? There are so many ideas, look forward to seeing yours!

Please also take a look at Nokia's Developer WIki for additional information.

Please also read our blog post about Nokia some time ago.

We will NOT be launching the challenge for ONE week so there is enough time for everyone to ask questions, talk with Nokia and GrabCAD and make sure GrabCADrs know what to work on and what Nokia expects.

Based on your questions and feedback we will update the specification and requirements and launch the Challenge on April 24, 2013.

Requirements

  • The design has to match current Lumia design style.

Rules

  • This Challenge is open to everyone.

  • You can submit several entries.

  • Only entries uploaded to GrabCAD library through this challenge page here will participate in the competition.

  • Applicants are not entitled to any compensation or reimbursement for any costs. The applicant’s participation shall not constitute employment, assignment or offer of employment or assignment.

  • Tag your model with “nokialumia”. Only entries with valid tag will participate!

  • Winners will be chosen based on the rules and requirements.

  • By entering this competition, you
    1. Warrant that the work is your original work.
    2. To the best of your knowledge, it is not, and has not been in production or otherwise previously published or exhibited.
    3. Neither the work nor its use infringes the intellectual property rights (whether a patent, utility model, functional design right, aesthetic design right, trade mark, copyright or any other intellectual property right) of any other person.

  • Design can be made in any software as long as STEP or IGES file and rendering is provided.

  • This Challenge starts on April 24, 2013 and ends on May 23, 2013, at at 11:59pm UTC.

  • Winners will be announced latest June 23, 2013 on GrabCAD.

  • One person can only win one prize.

  • The awarded participant is solely liable for the payment of all taxes, duties and other similar measures if imposed on the reward pursuant to the legislation of the country of his/her residence, domicile, citizenship, workplace, or any other criterion of similar nature.

  • Private entries must be shared with carla.eid@nokia.fi, kaspar@grabcad.com and sara@grabcad.com

  • Private entries will be made public after the end of competition

Prizes

Nokia Lumia 820 + GrabCAD shirt and mug for TOP 10 entries

1st -10th Prize

Nokia Lumia 820 + GrabCAD shirt and mug

About the jury?

The jury consists of experts from Engadget, Nokia and GrabCAD.

About Nokia

Nokia is a global leader in mobile communications whose products have become an integral part of the lives of people around the world. Every day, more than 1.3 billion people use their Nokia to capture and share experiences, access information, find their way or simply to speak to one another. Nokia's technological and design innovations have made its brand one of the most recognized in the world.

82 comments

  • Tomas

    Tomas almost 11 years ago

    Very interesting :)

    Tomas has uploaded 50 CAD models & has left 760 comments.
  • venkatesan

    venkatesan almost 11 years ago

    hmmm nice..................

    venkatesan has uploaded 18 CAD models & has left 4 comments.
  • teigan

    teigan almost 11 years ago

    the most sought after option to the lumia phones is - a way to replace the windows operating system.

    teigan has uploaded 9 CAD models & has left 167 comments.
  • Manish Sharma

    Manish Sharma almost 11 years ago

    dimensions?

    Manish Sharma has uploaded 2 CAD models & has left 14 comments.
  • Chester Lee Coloma

    Chester Lee Coloma almost 11 years ago

    This will be a great one!

    Chester Lee Coloma has uploaded 18 CAD models & has left 75 comments.
  • Fahad Rafi Butt

    Fahad Rafi Butt almost 11 years ago

    those were the days when Nokia produced monsters like the 7610, 6600, 3230, n 95, n 90, even n8! now we have WP crap! hardware and build is still same, solid, top notch, number one!! just the software gives me second thoughts............

    Fahad Rafi Butt has uploaded 360 CAD models & has left 663 comments.
  • Fahad Rafi Butt

    Fahad Rafi Butt almost 11 years ago

    developer.nokia.com says "Extra SIM or MicroSD holder" ,, funny thing, i carry 2 sim cards in, under the batteries, and between the battery and back cover :D

    Fahad Rafi Butt has uploaded 360 CAD models & has left 663 comments.
  • riyosketch

    riyosketch almost 11 years ago

    looks good :)

    riyosketch has uploaded 27 CAD models & has left 56 comments.
  • Fahad Rafi Butt

    Fahad Rafi Butt almost 11 years ago

    Team entries are welcome. In case of team win, prize will be transferred to team leader who is solely responsible for splitting it among team members.

    poor phone... :D

    Fahad Rafi Butt has uploaded 360 CAD models & has left 663 comments.
  • rohit

    rohit almost 11 years ago

    :)
    am in

    rohit has uploaded 3 CAD models & has left 9 comments.
  • Fahad Rafi Butt

    Fahad Rafi Butt almost 11 years ago

    where can we find lumia back cover???

    the one's on GrabCAD says no solid data, in solidworks...

    Fahad Rafi Butt has uploaded 360 CAD models & has left 663 comments.
  • David Lewis II

    David Lewis II almost 11 years ago

    what exactly are we designing? are we creating the case ( wireless system), or is the case existing and we need to make a design for it (physical appearence) ? or is it entirely different from that and we need to design accessorys other than its case?

    David Lewis II has uploaded 21 CAD models & has left 19 comments.
  • Tibor

    Tibor almost 11 years ago

    Fahad, here you can download case: Nokia Lumia 820 Shell All Parts

    Tibor has uploaded 167 CAD models & has left 212 comments.
  • Fahad Rafi Butt

    Fahad Rafi Butt almost 11 years ago

    tried it man, its step, SW says no solid geometry,

    Fahad Rafi Butt has uploaded 360 CAD models & has left 663 comments.
  • FLAY(非标90)

    FLAY(非标90) almost 11 years ago

    nokia??I like it

    FLAY(非标90) has uploaded 1 CAD models & has left 15 comments.
  • Aqil Ghaffar

    Aqil Ghaffar almost 11 years ago

    what we have to do???
    complete dessign with internal parts or only external design???

    Aqil Ghaffar has uploaded 99 CAD models & has left 204 comments.
  • Muhammad Nisaj

    Muhammad Nisaj almost 11 years ago

    Good... Lets try :)

    Muhammad Nisaj has uploaded 16 CAD models & has left 6 comments.
  • Dario

    Dario almost 11 years ago

    http://www.developer.nokia.com/Community/Wiki/3D_print_a_shell_for_your_Nokia_Phovv Here you can find STL and STEP... Good Luck to all :)

    Dario has uploaded 0 CAD models & has left 1 comments.
  • teigan

    teigan almost 11 years ago

    so the prize is a windows phone? seems more like a punishment than a reward.

    teigan has uploaded 9 CAD models & has left 167 comments.
  • Lumas

    Lumas almost 11 years ago

    Cool challenge, a few questions...

    Is the idea we base our design on the wireless charging technology, or can we come up with something entirely seperate from this?
    I checked out the bluetooth speakers... can you give any details on how much information can be streamed via bluetooth? Is video possible?
    Is it possible to include the idea of an APP that would be included as part of the product?

    Can't wait to get started :)

    Lumas has uploaded 16 CAD models & has left 67 comments.
  • Sourbh

    Sourbh almost 11 years ago

    Finally got chance to do something for Nokia, Its Great..... ready to begin...

    Sourbh has uploaded 110 CAD models & has left 3540 comments.
  • teigan

    teigan almost 11 years ago

    these aren't the droids you're looking for

    teigan has uploaded 9 CAD models & has left 167 comments.
  • Arthur Loginow

    Arthur Loginow almost 11 years ago

    Can you please provide the external dimensions? I would like to create a customize case but i need the phone dimensions for that

    Arthur Loginow has uploaded 0 CAD models & has left 3 comments.
  • Hardi Meybaum

    Hardi Meybaum almost 11 years ago

    Hi everyone, I'm super excited about this challenge. I was reading an article couple of months ago about Nokias view on 3D printing and now we have a challenge here in GrabCAD - how exciting is this.

    The original article is here - http://conversations.nokia.com/2013/01/18/everything-you-need-to-know-about-the-lumia-820-and-3d-printing/

    Hardi Meybaum has uploaded 6 CAD models & has left 771 comments.
  • Sara Sigel

    Sara Sigel almost 11 years ago

    Look here for developer information including CAD files, dimensions, and construction suggestions: http://www.developer.nokia.com/Community/Wiki/3D_print_a_shell_for_your_Nokia_Phone

    Nokia is asking you to design a case or accessory that matches the current Lumia style. So be as creative or practical as you like!

    Sara Sigel has uploaded 1 CAD models & has left 1851 comments.
  • Ajay Agrawal

    Ajay Agrawal almost 11 years ago

    should we have to work on charging case or design a fully new case for wireless charging..?

    Ajay Agrawal has uploaded 43 CAD models & has left 118 comments.
  • seghier khaled

    seghier khaled almost 11 years ago

    hello; nokia want accessory for the wireless charging or any accessory ? like keyboard for example ? or solar charger?

    seghier khaled has uploaded 10 CAD models & has left 89 comments.
  • Sara Sigel

    Sara Sigel almost 11 years ago

    We have focused the design brief based on your feedback and recommendations, thank you! Think Lumia 820. Think something that ties into wireless charging. We will be uploading the CAD files for you to use soon. Keep an eye out!

    Sara Sigel has uploaded 1 CAD models & has left 1851 comments.
  • teigan

    teigan almost 11 years ago

    i think what is confusing everyone is the term "case". they are thinking in terms of the retarded apple convention of selling a phone that requires the customer to purchase an additional protective case because their phone is so dysfunctionally fragile that even light usage will damage the surfaces. non-apple phones are less demanding on customers and purchasing a case is truly optional. when nokia talks of a "case", they are referring to the outer shell of the phone, which of course comes with and is an integrated essential part of the phone itself.

    teigan has uploaded 9 CAD models & has left 167 comments.
  • Anil

    Anil almost 11 years ago

    @teigan non-iphone are less demanding? watch this http://www.youtube.com/watch?v=6M5q5TRuAsY

    Anil has uploaded 0 CAD models & has left 1 comments.
  • Arthur Loginow

    Arthur Loginow almost 11 years ago

    Does someone has the Nokia model on SLDPRT?? I am having the same problem that Carl

    Arthur Loginow has uploaded 0 CAD models & has left 3 comments.
  • AIT OUFKIR YASSINE

    AIT OUFKIR YASSINE almost 11 years ago

    I have the model in 3d's and cinema 4D, any one is interessted have to send me a message,
    good luck for you all, and it's a verry nice challenge from NOKIA

    AIT OUFKIR YASSINE has uploaded 32 CAD models & has left 381 comments.
  • Nemanja Ranković

    Nemanja Ranković almost 11 years ago

    Nokia Lumia 820 I made one myself, hope that can help you

    Nemanja Ranković has uploaded 114 CAD models & has left 480 comments.
  • david

    david almost 11 years ago

    hi.i am not understand this desqription:How about a waterproof 820 case for listening (and charging) your Lumia while you shower?help me plz.

    david has uploaded 18 CAD models & has left 152 comments.
  • Adnan PMI

    Adnan PMI almost 11 years ago

    can i get the dimensions of the nokia 820. . should the model be so precise to the original nokia 820 or just simply ideological 3d models (without constraints)?

    Adnan PMI has uploaded 1 CAD models & has left 4 comments.
  • Ethan Bella

    Ethan Bella almost 11 years ago

    Im pretty confused by the description of this competition. Is the goal to create a case for the phone and also a design for the wireless charging pad, or is it something else. It looks like it is asking for a case that permits wireless charging for the phone but I dont see how that is necessary being that wireless charging is built into the phone alredy. Any clarification?

    Ethan Bella has uploaded 3 CAD models & has left 2 comments.
  • Mitrut Badiu

    Mitrut Badiu almost 11 years ago

    Hello! where can I download a 3D model of Nokia Lumia 820?

    Mitrut Badiu has uploaded 13 CAD models & has left 19 comments.
  • EDISON PHOENIX

    EDISON PHOENIX almost 11 years ago

    Comments and feedback most welcome on my work:
    Speaker and holder

    EDISON PHOENIX has uploaded 141 CAD models & has left 685 comments.
  • Negrievski Nenad

    Negrievski Nenad almost 11 years ago

    Hi. I want to design a magnetic holder and wireless charger for the Nokia. Can someone from the jury please tell me if the magnet would interfere with the wireless charging. Thanks in advance.

    Negrievski Nenad has uploaded 3 CAD models & has left 18 comments.
  • Michael May

    Michael May almost 11 years ago

    Only a couple of hours time ... its getting exciting. I have seen many good entries. Please check my entry: Nokia viewfinder

    Michael May has uploaded 2 CAD models & has left 8 comments.
  • Ridwan Sept

    Ridwan Sept almost 11 years ago

    I didn't found this my works in the entries. Whereas, I tag it with nokialumia see in this link : http://grabcad.com/library/nokia-lumia-case-and-camera-stand-1

    Ridwan Sept has uploaded 220 CAD models & has left 1677 comments.
  • Mitja Lunder

    Mitja Lunder almost 11 years ago

    I have put in a lot of time and tought into my design. Hope you guys like it. Comments most welcome!!! SMART CUBE

    Mitja Lunder has uploaded 18 CAD models & has left 31 comments.
  • Sourbh

    Sourbh almost 11 years ago

    Today Is Final, Excited to see Results...

    Sourbh has uploaded 110 CAD models & has left 3540 comments.
  • Sara Sigel

    Sara Sigel almost 11 years ago

    I am sorry to say that we need to push the results announcement back one week - there were so many great entries that Nokia is still looking over the submissions. Check back here by next Sunday for their choices!

    Sara Sigel has uploaded 1 CAD models & has left 1851 comments.
  • Sourbh

    Sourbh almost 11 years ago

    One more Week mmmmmmmmmmmmmmmmmmmmmmm..................

    Sourbh has uploaded 110 CAD models & has left 3540 comments.
  • peter janssen

    peter janssen almost 11 years ago

    EeHmmm, typical...................

    peter janssen has uploaded 0 CAD models & has left 25 comments.
  • akram

    akram almost 11 years ago

    impatient de voir les resultats ..

    akram has uploaded 33 CAD models & has left 85 comments.
  • AIT OUFKIR YASSINE

    AIT OUFKIR YASSINE almost 11 years ago

    ok, take your time to choose to best submissions, good luck for you all,

    AIT OUFKIR YASSINE has uploaded 32 CAD models & has left 381 comments.
  • Dragan Beljan

    Dragan Beljan over 10 years ago

    Final day

    Dragan Beljan has uploaded 89 CAD models & has left 172 comments.
  • Sara Sigel

    Sara Sigel over 10 years ago

    Finalists are posted! Let us know which one you like best and stay tuned for the winner very soon :)

    Sara Sigel has uploaded 1 CAD models & has left 1851 comments.
  • Fahad Rafi Butt

    Fahad Rafi Butt over 10 years ago

    copied ideas won..................

    Fahad Rafi Butt has uploaded 360 CAD models & has left 663 comments.
  • Luis Cordoba

    Luis Cordoba over 10 years ago

    Oh man, I will never understand the judgement process for the contests, sometimes I think it's just random... :S.

    Luis Cordoba has uploaded 42 CAD models & has left 299 comments.
  • jose

    jose over 10 years ago

    Some of the favourites won, other just..... I don't really understand some of the picks.
    Nice job for the winners

    jose has uploaded 4 CAD models & has left 6 comments.
  • jose

    jose over 10 years ago

    http://grabcad.com/library/nokialumia--v
    For me the best. Good idea, nicely done and good presententation, very complete

    jose has uploaded 4 CAD models & has left 6 comments.
  • BDNS Murthy

    BDNS Murthy over 10 years ago

    Yeah Luis Cordoba. These people dont know how to judge. Even then they dont know even how to see the features and the highlights.

    BDNS Murthy has uploaded 55 CAD models & has left 64 comments.
  • jamie

    jamie over 10 years ago

    Congrats to the winners - what is the next step, when do the prizes get given out etc.

    jamie has uploaded 21 CAD models & has left 63 comments.
  • Branko Stokuca

    Branko Stokuca over 10 years ago

    To many copies and the best copies won :) others are just to sad to comment.

    Branko Stokuca has uploaded 117 CAD models & has left 855 comments.
  • Dragan Beljan

    Dragan Beljan over 10 years ago

    I agree with you Tomasz. Fairest thing would be that the Nokia Lumia 820 gives all competitors. It is not a specific cost for such a large company.

    And each of these works can be used for the benefit of the companyv

    Dragan Beljan has uploaded 89 CAD models & has left 172 comments.
  • jamie

    jamie over 10 years ago

    some very sore loosers commenting here. Grabcad offers people the chance to win some small prizes donated by large companies - no one forces anyone to take part and therefore you should be grateful to be given the opportunity to showcase your work -FREE of charge.

    jamie has uploaded 21 CAD models & has left 63 comments.
  • teigan

    teigan over 10 years ago

    hilarious results. better sell off my remaining nokia stock before it's too late.

    teigan has uploaded 9 CAD models & has left 167 comments.
  • jamie

    jamie over 10 years ago

    The difference between your design and the winners, Tomasz - is that the winners looked alot better. More thought had been put in to presentation as well as design. This time you were just unlucky, and im sure your not the only person in the entire world to dream up a concept of creating a better camera lense for a mobile phone. Good luck in future competitions. This is all just a bit of fun.

    jamie has uploaded 21 CAD models & has left 63 comments.
  • Sara Sigel

    Sara Sigel over 10 years ago

    I am very sorry to hear about the response from everyone on the choices!

    If you feel a finalist is a copy of another entry please contact me at sara@grabcad.com and we will work with the Nokia team to better meet your expectations.

    This is all about rewarding the best entries and we won't settle for less for our Community! This week we will reevaluate, so send your feedback to me as soon as you can (if you've already posted I'd love to hear more details in an email from you.)

    Sara Sigel has uploaded 1 CAD models & has left 1851 comments.
  • Branko Stokuca

    Branko Stokuca over 10 years ago

    I agree with you Santiago Ti the table is for IKEA not NOKIA ;) and i am sure that it would look nice in my bedroom but i really can't imagine NOKIA selling the phone and selling the table as the phone accessory :)))))))

    Branko Stokuca has uploaded 117 CAD models & has left 855 comments.
  • akram

    akram over 10 years ago

    totaly agree :/

    akram has uploaded 33 CAD models & has left 85 comments.
  • Branko Stokuca

    Branko Stokuca over 10 years ago

    :)

    Branko Stokuca has uploaded 117 CAD models & has left 855 comments.
  • Julius Siador

    Julius Siador over 10 years ago

    I hope Samsung and IKEA would make their challenges here also so I may showcase my ideas (and of Jamie's too) free of charge ;)

    Julius Siador has uploaded 16 CAD models & has left 62 comments.
  • Julius Siador

    Julius Siador over 10 years ago

    I've appreciated your keen observation, Santiago. I can't help but recalled Philips' HUE lighting system featured in Apple stores as their iphone and ipad accessory:
    http://www.newscenter.philips.com/main/standard/news/press/2012/20121029-Introducing-Philips-hue.wpd#.UdLxPazi6Rv
    So, you're right, Branko: What's left is an IKEA innovation for anyone like me who haven't yet encountered a lighting furniture designed like that. ;)

    Julius Siador has uploaded 16 CAD models & has left 62 comments.
  • Julius Siador

    Julius Siador over 10 years ago

    N-Gage handheld Game System and Nokia Lumia 820 GamePad Flip Case are my choice for 1st- and 2nd-place respectively. I just can't understand how some entries entered as finalist being sloppily designed if compared to their non-finalist counterparts, i.e. in the camera-accessory category. Perhaps some jury never looked closely (or haven't yet figured out how to view) the CAD models with the powerful and most intuitive GrabCad 3D viewer;) Otherwise this should have been a showcase of game controllers dominating the field of finalists :D

    Julius Siador has uploaded 16 CAD models & has left 62 comments.
  • Tan Wei Kok

    Tan Wei Kok over 10 years ago

    Nokia listed down 2 key areas and 1 requirement:
    1) What designs can you develop for their charging products?
    2) Can you integrate their Qi Wireless charging system?
    3) The design has to match CURRENT Lumia design style (requirement)

    I found this sentence highlighted Nokia's intention for sponsoring this challenge "Nokia has been pushing for wireless charging as an inbuilt function on all of their phones". It clearly stated again that Nokia wants wireless charging solution, so it should be the primary criteria, the others are secondary. Ask yourself whether your design followed the above criteria and requirements before pointing fingers on others.

    On why some designs are selected and some are not, we just have to believe in the judging panel decision and move on. Making a scene here will be unhealthy for this community nor it is helpful for your career. It might even turn away potential challenge sponsors and employers.

    As for future challenges, don't wait or tell GrabCAD what to do. Help them spread the words and benefits about crowd sourcing in design if you have connections. Since my entry to Lite Plus challenge, I had so far get local BlackBerry and Sony interested; hoping they will feedback this site to their HQs, so that we can get more challenges on GrabCAD. If all 250k of us do our part, I probably start having nightmares about challenges.

    Thanks

    Tan Wei Kok has uploaded 22 CAD models & has left 153 comments.
  • jamie

    jamie over 10 years ago

    @Tan Wei Kok - well said, the best comment posted on here.

    jamie has uploaded 21 CAD models & has left 63 comments.
  • Julius Siador

    Julius Siador over 10 years ago

    Jamie and Tan, in this imperfect world, expect some valid comments from sore losers, then move on. We're in a technological age already and moved long time ago from Dark Ages when critics were repressed. Such outcry you've seen here are one indicator that this maturing community is very active and making their presence felt. In retrospect, some critics here can even justify the sentiments of some panel or individuals in the jury as the selection of finalists from such vast entries cannot be unanimous to the jurors--well, there is still a statistical probability I could be wrong ;)

    These critics here are not a nonsense grumbling bunch such as that featured in the parable of harvest workers in the Bible. These are unpaid individuals with their own sense of IP rights. As human, we all have our personal appreciation of events and the jury cannot exclude themselves from the scene.

    Personally, I believe I'm among the few who never cared of losing their IP to challenges such as this. I don't care if I win or lose because the right of being in the challenge is an experience worthy enough for me. Also, I don't even bother to pull out my designs or withheld them from public view if it is truly revolutionary or somehow a disruptive innovation. I even contemplate on improving my non-winning public entries further and sharing them. Moreover, it's a personal shame for my part to pull out some highlights in my entry if ever I will be counted as one of the finalist for the lame reason that companies might copy my design without due acknowledgement--its a public entry anyway.

    I encourage anyone to share their IP and put their trust in their creative powers and let go of their creations for the good of the GrabCad community. We are definitely a bunch of inexhaustibly creative brothers around here! Let our presence be felt!

    Julius Siador has uploaded 16 CAD models & has left 62 comments.
  • Tomasz Szewczyk

    Tomasz Szewczyk over 10 years ago

    BTW I know great minds think alike and more than one can come to the same conclusion, but as much as my position was a bit overdrawn, it served its goal.
    GrabCAD needs a forum.

    Tomasz Szewczyk has uploaded 3 CAD models & has left 23 comments.
  • zalb

    zalb over 10 years ago

    It's useless to comment and be angry... I have already stopped thinking about it. I rather took some time and modified my Lumia 710 for wireless charging. There is no such CAD software that could do it better than me with some tools and my hands. Looks fantastic and works fantastic.
    If you have an very perspective idea that could bring you millions, you just don't share it in public, but patent it. That's all.
    Have a nice day everyone!

    zalb has uploaded 4 CAD models & has left 2 comments.
  • jamie

    jamie over 10 years ago

    when are we going to find out the results in placement order?

    jamie has uploaded 21 CAD models & has left 63 comments.
  • Tan Wei Kok

    Tan Wei Kok over 10 years ago

    Is there a need for placement order since all are getting the same prize? Everyone is already a winner =) How I wish Nokia include a job offer as prize :p

    Tan Wei Kok has uploaded 22 CAD models & has left 153 comments.
  • Sara Sigel

    Sara Sigel over 10 years ago

    The final results have been posted! We apologize for taking so long after the initial announcement of the finalists, as we wanted to incorporate your feedback and make sure we placed the entries based on the main goals of incorporating wireless charging in an inventive way and matching the Nokia Lumia brand's look and feel. We hope that you see this in the results and will congratulate all the winners, honorable mentions, and participants.

    Sara Sigel has uploaded 1 CAD models & has left 1851 comments.
  • Tan Wei Kok

    Tan Wei Kok over 10 years ago

    Thanks Sara Sigel =)

    Tan Wei Kok has uploaded 22 CAD models & has left 153 comments.
  • Please log in to add comments.

    Log in
We have updated our terms in order to better protect your hard work and keep our challenges running smoothly! To submit your challenge entry, please read and accept the new Challenge Terms and Conditions.

Save Cancel