The commands related to View Toolbar are mentioned below.
While drawing and designing the Viev toolbars, the shapes vary in size and angle
We can see and see that the body makes a dominant image. Now view
Let us know the buttons on the
Fly Mode: This mode allows you to move on the screen from a specific point of view
Click on the middle button of the cause and then right click on it.
You can do it and it looks like you're flying in space
Click on the airplane sign on the screen and select view
The toolbar gets the following view.
Turn Head: Keep your eyes fixed at some point
You turn around. When you turn your head,
The part returns equally. But here is the point to be careful
In the command you will rotate around the piece that does not rotate.
Fly Through: It means flying towards the track. Click the button
Click and see the arrow in the image next to it
It will come out. Continue to press Mause's right button
When you move mause,
You will see that you are moving and catia this view
Unlike other programs with modules, the working surface
Allowing you to work more comfortably on the space plane.
Accelerate: The speed of the flight mode you saw above
When the button is clicked, the speed numbers under the arrow increase
You will see.
Accelerate: The speed of the flight mode you see above
When the button is clicked, the speed numbers under the arrow are decreasing
You will see.
Fit all in: No matter where the part is on the space plane,
Or zooming out to focus the part on the center of the screen.
Normal View: When this button is pressed and any surface is selected,
Appears in a normal appearance. The clicked surface
Parallel to the working surface.