Tutorials

  • feature ×
Small

14 Ways To Create Curve

1 0 Beginner
Surface modeling with Creo Parametric 4.0: 14 Ways To Create "Curve" * Sketched Curve * 2D Curve created between points * 3D Curve created by points * Curve defined by points from CSYS * Curve conected to another Curves * Curve created on a surface edge * Projected Curve * Wraped Curve * Curve defined by Equation * Intersected Curve by curves * Intersected Curve by quilts * Copy edge from solid * Curve from Cross Section * Trace Curve defined by mechanism
Small

PTC Creo 4.0: How to create Sketched features

0 0 Beginner
Step by step with Creo Sketch features - or: How to create Sketched features with Creo Parametric 4.0
Small

PTC Creo 4.0: How to create Hole feature

0 0 Beginner
Holes are pick and place features with circular cross-section. Holes remove material from the model. You can create couple of types of holes. In this tutorial you can learn how to Create Simple Straight Holes, Standard Holes and Sketched Holes. I will focus on hole placements (Linear, Radial, Diameter and Coaxial Placement) and Depth Options.
Small

PTC Creo 4.0: How to create Shell feature with Creo

0 0 Beginner
A shell feature is a pick and place feature that creates a hollowed out solid with a specified wall thickness. Note: The pick and place features (same as chamfers, rounds and holes) means that the shape of the feature is implied - you are not required to sketch the section. Pick and place features can be added once the model’s shape has been created. You can create two types of shells: • Open Shells (example in this video tutorial) • Closed shells (create base geometry and apply Shell feature)
Small

PTC Creo 4.0: How to create Chamfer feature

0 0 Beginner
... tutorial about How to create and edit Chamfer feature
Small

PTC Creo 4.0: How to create Round feature

0 0 Beginner
Couple of examples - How to create Round feature in Creo: * edge references * surface references * stop at reference * Round properties * Full Round * Variable Round and more ...
Small

PTC Creo 4.0: How to create Revolve feature

0 0 Beginner
The Revolve features are created in a similar way to Extruded features. The main differences are that the section of a revolve must contain a centerline (which represents the axis of revolution) and an angle of revolution is defined instead of a depth. Here is the video tutorial for you: How to create Revolve feature with Creo
Small

PTC Creo 4.0: How to create Extrude feature in Creo

0 0 Beginner
Most used feature in the Creo Parametric is Extrude feature. You will learn how to create, modify and configure solid and surface shapes easily and quickly.
Small

How to use sweep in solidworks?

0 0 Intermediate
Added a SW file to your model with (sweep) cable added used 3d sketch feature to get a "lifelike" cable and next time, please draw scale 1:1, easier to use your model as a part in future assemblies....now your USC connector is very, very small
Missing_small

What is Extrude

0 0 Intermediate
Enjoy this very basic guide to Extrude.
Missing_small

Solidworks 2012,, Tutorial, Wrap Feature Tutorial?

0 0 Intermediate
follow the steps correctly and you'll complete wrapping in 15 mins tops! ASK questions if you get stuck anywhere! cheers! pause and review as many times as you want!
Small

how to generate program in nx-cam using feature based machining?

0 0 Beginner
please select the link for the tutorial
Small

Solid Edge Tutorial for Beginners - Simple Simulation

0 0 Beginner
-Tutorial-
Small

Tutorial - Warp feature in Creo Elements aka Pro/E?

0 0 Beginner
Here is the tutorial.
Small

Tutorial - Transform feature in Creo Elements aka Pro/E?

0 0 Beginner
Here is the tutorial.
Small

Tutorial - Twist feature in Creo Elements aka Pro Engineer?

0 0 Beginner
Here is the tutorial.
Small

Tutorial - Stretch feature in Creo Elements aka Pro/E?

0 0 Beginner
Here is the tutorial.
Small

Tutorial - Spine feature in Creo Elements aka Pro/E?

0 0 Beginner
Here is the tutorial.
Small

Tutorial - Sculpt feature in Creo Elements aka Pro/E?

0 0 Beginner
Here is the tutorial.
Small

Tutorial - Sculpt feature in Creo Elements aka Pro/E?

0 0 Beginner
Here is the tutorial.
Small

Tutorial - Bending in Creo Element aka Pro/E?

0 0 Beginner
Here is the tutorial.
Small

Tutorial - Using Combine feature to create part in SolidWorks?

0 0 Beginner
Here is the tutorial.
Small

Tutorial: Using Shell function in Catia V5.

0 0 Beginner
Tutorial: Using Shell function in Catia V5
Small

Tutorial: Splitting solid models by using surfaces in Catia V5.

1 0 Beginner
Tutorial: Splitting solid models by using surfaces in Catia V5
Small

Tutorial:Using filet bead feature (in Weldments) in Solidworks.

0 0 Beginner
Tutorial:Using filet bead feature (in Weldments) in Solidworks.
Small

Tutorial:Using snap hook fastening feature in Solidworks.

0 0 Beginner
Tutorial:Using snap hook fastening feature in Solidworks.
Small

Tutorial:Using snap groove fastening feature in Solidworks.

0 0 Beginner
Tutorial:Using snap groove fastening feature in Solidworks. Zoom the images by clicking on them to see the tutorial in a better way.
Small

Tutorial:Using mounting boss fastening feature in Solidworks.

0 0 Beginner
Tutorial:Using mounting boss fastening feature in Solidworks.
Small

Tutorial:Using vent feature in Solidworks.

0 0 Beginner
Tutorial:Using vent feature in Solidworks.
Small

Tutorial: How to use split in Autodesk Inventor?

0 0 Beginner
Tutorial: How to use split in Autodesk Inventor.