Alexander Kilian

"Give me a place to stand, and with a ratio I shall stop the earth."

2434

followers

Stuttgart, Germany

Models

Sort by: Popular
V160 6-speed manual transmission (GETRAG 233) - Complete Assembly
Finally I made it to complete this longtime project! I'm proud to present you the transmission from the legendary Toyota Supra MKIV! The CAD model ...
880 6071 170
DH MTB Assembly
Hey guys, I just finished my complete DH mountainbike model and here are the first renderings for you! Will be updated soon! Thanks a lot to the co...
515 4555 83
V160 (GETRAG 233) Bell Housing - Die Cast Casing
This was a hard piece of work! Only by looking at google pics I built up a CAD model of the Bell housing for the https://grabcad.com/library/v160-6...
334 3638 55
V160 6-speed manual transmission (GETRAG 233) - Internal Shifting
According to my gearset model https://grabcad.com/library/v160-6-speed-manual-transmission-getrag-233-1 here is the corresponding shifting system. ...
459 3499 63
Stepped Planet Assembly
A stepped planet gearbox is a special epicyclic gearbox which allows to achieve quite high ratios, to handle high speed input shaft rotation und ha...
357 2779 55
Hitachi Starter for Nissan vehicles
This time I completely stripped down a starter from Hitachi which has been replaced due to beeing weak. Basically the assembly seems to be easily c...
358 2535 46
V160 6-speed manual transmission (GETRAG 233)
This is the gearset of the 6-speed manual transmission from GETRAG (Type 233). It was produced in the 1990s for the Toyota Supra MK4 and was later...
329 2440 45
SCHAEFFLER Lightweight Differential
Yeah, finally I made it to design the planetary lightweight differential patented by SCHAEFFLER. The most useful information can be found here: ht...
306 2289 46
Limited Slip Differential (LSD)
Here it is! My limited slip differential is ready now! Some technical data: -Designed for up to 5000 Nm of torque on the axle -Two different s...
292 2273 44
Torsen Differential Animation
After making the CAD model of the Torsen diff I had the idea to animate it. So I made 3 animations of it: - Complete ASM with turning forward, slip...
343 1846 50
V160 (GETRAG 233) Cover Housing - Die Cast Casing
Actually I did not plan to upload any parts from the whole gearbox until it's finished but this housing came out so good, I had to share it with yo...
164 1780 20
Torsen Differential Type A
This is the corrected version of the Torsen Type A LSD. Find the difference ;-)
182 1570 23
Concept frame for DH MTB
This frame was created within the scope of a student research project during my studies. The primary target was to design a new suspension kinemati...
188 1479 25
Spherical conjugated Differential Bevel Gears
Here is a design family of a bevel gear set for application in differentials. The bevel gears are spherical conjugated which means that the gears a...
171 1352 20
Spiral Bevel Gear Set
It's my first try to design a bevel gear set. The ratio is 37/9. Thanks @ https://grabcad.com/dr.lunin-1 for the gear geometry template! Please p...
115 1324 9
Grundfos Challenge - Dual Cycloidal Gearbox
This model represents my solution for the Grundfos Challenge. All necessary information can be found in the folder "documents" - Technical presen...
144 1249 36
VW Golf I Input Shaft - Complete Assembly
I have been modelling the complete assembly of the input shaft for the Volkwagen Golf I 4-Speed Transmission. Here is the complete assembly which ...
159 1188 38
DT Swiss Rear Hub
It's one of my older works, so it is actually not completly correct about the bearing. But the most measures in the model should be correct. Especi...
82 1152 4
Planetary Differential
This is a typical planetary differential with a double planet (i = +2). Ring gear is the differential input the wheels are connected to the sun and...
106 1008 7
Fox 40 RC2 fork with brake and hope stem
Here is a Fox 40 model I downloaded here from https://grabcad.com/david.pearce , thank you for that! I modified it for all correct dimensions and a...
105 986 8
MTB Downhill Frame Concept
Hey guys, now I'm ready to present my new frame design. Some frame specs below: • Head tube angle: 64° • Wheel base: 1180 mm • Chainstay leng...
109 971 17
R5 Crankshaft
One of my first models while learning to handle with Catia V5
101 910 35
ZA Worm with Globoid Gearwheel v02
Since I did my last model without consulting any values from professional literature, I didn't match the worm size very well. So here is a correct...
68 869 2
ZA Worm with Globoid Gearwheel
Here my gear series continues with a worm gear design. The tooth of the worm has the ZA shape and is designed to be cylindrical. The gearwheel ther...
71 863 4
White Stratasys Logo White GrabCAD Logo
© 2025 Stratasys Inc.
ABOUT US
RESOURCES
Support
SOCIAL
Streamline Pro
Control
Print
Pro
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.