Learn about the GrabCAD Platform
Get to know GrabCAD as an open software platform for Additive Manufacturing
Visit our new homepage
Home
Control
Shop
Streamline Pro
Partner Program
Print
Community
Log in
Library
Challenges
Groups
Questions
Tutorials
Engineers
Blog
Log in
Andrew Gillespie
Follow
7
followers
Boston, United States
Models
About
Models
12
Tutorials
0
More
Followers
7
Following
0
Likes
2
Following
0
Followers
7
Likes
2
Models
Sort by:
Recent
Recent
Popular
Most liked
Most commented
Most downloaded
E3 Direct Drive Cable Manager
This cable manager makes use of the vacant spool feed stepper motor platform. It can be screwed to the platform from below using the existing holes...
1
9
0
Ender D1 Structure for E5 S1 Acrylic Top Cover Mod - UPDATED
I created a structure to hold the acrylic cover that fits the E5 S1 to fully enclose it in order to print ABS parts that are bigger than the Ender ...
5
51
1
Ender S1 Pro Top Rail camera mount
Revised CAD to improve structure based on a vertical print orientation with fillets to resist breakage through flexing along print lines (Actually ...
3
66
0
E3 Autohome rail camera mount
This camera mount gives a better view across the build plate so that the print and print head is visible, so that you can see whether there has bee...
1
15
0
After market direct print 4 wheel kit X-stop bumper
I had an after market 3 wheel direct motor mount, and bought a similar after market mod from another vendor with an extra wheel. The four wheel bea...
2
17
0
Ender 3 front storage trays
Who doesn't need storage, especially for all the tools for the printer and for post-processing of the model? This storage unit makes use of the End...
11
37
0
Ender E3 Blink camera front rail mount
This Mod is a snap-together Blink camera mount with a cable channel to route the cable to the back of the printer.
7
48
2
Ender spool mount with bearings
This mod adds a bearing feature for smooth feed movement, using the same bearings in the print head and Z-axis assemblies.
10
48
0
Ender spool feed guide
This mod is to guide the spool feed to avoid the occasional knot that has happened with the spool over rotating and a loop dropping out of a full s...
4
19
0
Ender E3 cable cowling
This mod cleans up the cable run for a direct drive mod, to route the cable around to the right side, keeping the feed area free of cables, and giv...
2
19
0
Ender D1 top corner mount runout sensor shuttle
This is a mount for the repositioned runout sensor for a top rear corner mounted spool. The spool mount was repositioned to reduce D1 footprint not...
4
15
0
Ender D1 Blink camera top corner mount
This is a corner mount for a blink camera.
4
24
0
