Austin Downey

27

followers

United States

Models

Sort by: Recent
USB Stylus holder for Wacom (CS321AK) Bamboo Ink
This is a Stylus holder that fits into a USB type-A port. This is designed for a Lenovo ThinkPad Carbon Yoga but will work for any standard USB por...
9 117 1
Wire Cloth, 2x2 copper wire mesh, McMaster part 9224T45
McMaster does not have models of its copper wire mesh so I built one of part number 9224T45. Modeled in Fusion 360. Shape Sheet Construction Wove...
42 1321 1
Wire Cloth, 4x4 copper wire mesh, McMaster part 9224T46
McMaster does not have models of its copper wire mesh so I built one of part number 9224T46. Shape Sheet Construction Woven Material Copper Mesh S...
19 1111 1
HP/Agilent/Keysight 4263B LCR 4-probe to 2-probe adapter
This is a 3d printable box that is used to convert the 4 BNC connectors on a 4263B to a 2-probe contact that uses banana ports. The inside is lined...
12 97 2
4mm Banana Plug Socket - Panel Mount - Binding Post
These are 4mm banana plugs that can be purschaced on ebay. Below are two titles used at the time of this post. "4mm Binding Post Banana Jack Plug ...
19 687 1
OMEGA’s LC716 Series tension link load cell
A high-capacity tension link load cells manufactured by Omega. OMEGA’s LC716 Series tension links have a female to female thread connection.
0 40 0
80/20 20-series (20-2040)
This is a model of 80/20 20-series double (20mmx40mm) extrusion, done as a native creo parametric 4.0 part.
9 926 0
80/20 20-series (20-2020)
This is a model of 80/20 20-series extrusion, done as a native creo parametric 4.0 part.
7 482 0
T8 Nut Block, T8 Nut Converter Quartet Block
Aluminum Screw T8 Nut Converter Quartet Block Screw Housing Seat for 3D Printer. These are commonly available on eBay and Amazon.
17 812 5
12mm CNC Aluminum Linear Support Bearing
A 12mm CNC Aluminum Linear Rail Shaft Guide Support Bearing, sometimes called SK12. Done as a native creo parametric 4.0 part.
26 942 2
Alligator Clip (Mueller_DS-BU-60C)
An alligator clip, Mueller_DS-BU-60C, along with the data sheet. A 50 x 7 mm alligator clip.
14 777 3
8 unit rack mount power switch - strip
A basic 8 unit rack mount power switch. Based off a Pyle PDBC10
13 430 0
Panel mount USB type B
Panel mount USB type B, C3G # 28073. Solid Work files and .igs
44 1470 0
24 Port Rackmount BNC Patch Panel
24 Port Rackmount BNC 50 Ohm Patch Panel By Tuff Jacks
16 422 0
80/20 20mmx40mm 45 Degree Support, 160mm Long
80/20 aluminum extrusion 20-2040 45 Degree Support, 160mm Long Part Number: 20-2566
7 363 0
80/20 20mm quad aluminum extrusion 20-4040
80/20 aluminum extrusion 40mm X 40mm x 4m T-Slotted Profile - Six Open T-Slots Part Number: 20-4040
28 1993 3
80/20 20mm double aluminum extrusion 20-2040
80/20 aluminum extrusion 20mm X 40mm x 4m T-Slotted Profile - Six Open T-Slots Part Number: 20-2040
26 1534 1
13 port USB 2.0 hub
A Sabrent HB-U14P 13 port USB 2.0 hub.
12 512 0
Bud industries cast aluminum project box CN-6704
A bud Industries cast aluminum project box with the lid. These are rough-outs only, bets used only for spacing requirements. Three models, the b...
4 193 0
National Instruments C-series module
A simple c-series module best used for models of equipment setups. I have included a SolidWorks assembly with related parts, and a single SolidWor...
11 497 2
national instruments NI cdaq 9174
The basic rough-out of a national instruments NI cdaq 9174. Best used for setting up experiments, not a perfect model.
7 625 1
80/20 40 Dual hole Inside Corner Bracket
40 Series 4 Hole - Inside Corner Bracket with Dual Support Part Number: 14100
7 422 0
80/20 40 series Tee flat plate
40 Series 7 Hole - Tee Flat Plate for the metric 40 series aluminum extrusion. Part Number: 40-4312-Black
3 170 0
80/20 40-4040
80/20's 40 mm aluminum framing extrusion. 40mm X 40mm Ultra-Lite T-Slotted Profile - Four Open T-Slots Part Number: 40-4040-UL
8 868 0
White Stratasys Logo White GrabCAD Logo
© 2025 Stratasys Inc.
ABOUT US
RESOURCES
Support
SOCIAL
Streamline Pro
Control
Print
Pro
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.