Learn about the GrabCAD Platform
Get to know GrabCAD as an open software platform for Additive Manufacturing
Visit our new homepage
Home
Control
Shop
Streamline Pro
Partner Program
Print
Community
Log in
Library
Challenges
Groups
Questions
Tutorials
Engineers
Blog
Log in
DeusT
Follow
3
followers
Indonesia
Models
About
Models
15
Tutorials
0
More
Followers
3
Following
0
Likes
1
Following
0
Followers
3
Likes
1
Models
Sort by:
Recent
Recent
Popular
Most liked
Most commented
Most downloaded
Fery Roro DT
Dimension : Length (overall) = 153.54 meter, beam = 27.37 meter and draft = 6.5 meter.
3
33
0
Redesign Structural Support - DT
Proposed design has mass reduction 30% compared to original design. Has good performance in structural strength and stiffness.Easy manufactured as ...
2
27
0
ULA Bracket DT-6
Below are additional information : Density : 0.04841 pounds per cubic inch Mass = 0.063 pounds Volume = 1.31 cubic inches The minimum edge distan...
2
16
0
ULA Bracket DT-5
ULA Bracket DT-5 is optimized version of my previous submission which called ULA Bracket DT-4. Below are additional information : Density : 0.0484...
2
37
0
ULA Bracket DT-4
ULA Bracket DT-4 was developed based on my previous model which submitted in this challenge. Below are additional information : Density : 0.04841 ...
5
26
1
ULA Bracket DT-3
ULA Bracket DT-3 is improved version of my second model called ULA Bracket DT-2 Mass = 0.0665 pounds Volume = 1.3739 cubic inches The minimum edg...
7
26
0
ULA Bracket DT-2
ULA Bracket DT-2 is optimized version of my first model called ULA Bracket DT-1 Mass = 0.0676 pounds Volume = 1.3959 cubic inches The minimum edg...
3
27
0
ULA Bracket DT-1
Mass = 0.09972 pounds Volume = 2.05993 cubic inches The minimum edge distance surrounding all bolt holes (0.22in) is 2 times the diameter of the b...
4
28
0
Underrun Protection_Version DT-D
Total mass = 49.22 kg (density = 7870.00 kg per cubic meter) Simulation results : Load case P1 (Max.Displacement = 1.98 mm ; Max.Von Mises stress...
5
47
1
Underrun Protection_Version DT-C
Total mass = 49.8 kg (density = 7870.00 kg per cubic meter) Simulation results : Load case P1 (Max.Displacement = 3.14 mm ; Max.Von Mises stress...
5
34
0
Underrun Protection_Version DT-B
Stiffners intended to distribute load uniformly. Simulation results will be uploaded later.
2
11
2
Underrun Protection_Version DT-A
My first design for this challenge and will be optimized for next version. Total mass = 66.67 kg.
1
22
0
Robot Gripper Arm - Version DT 3
This is Version - DT 3. Weight = 30.45 kg ; Safety factor (min.) = 3.03 ; Displacement (max.) = 1.53 mm
3
44
0
Robot Gripper Arm - Version DT 2
This is version DT 2 . Weight = 32.59 kg ; Safety factor (min.) = 3.12 ; Displacement (max.) = 1.479 mm.
10
57
5
Robot Gripper Arm Version - DT 1
This is version - DT 1. Stiffeners combination will transfer load smoothly to structural constraints (fix and pin). Weight = 42,6 kg ; Safety Facto...
4
30
2
