Learn about the GrabCAD Platform
Get to know GrabCAD as an open software platform for Additive Manufacturing
Visit our new homepage
Home
Control
Shop
Streamline Pro
Partner Program
Print
Community
Log in
Library
Challenges
Groups
Questions
Tutorials
Engineers
Blog
Log in
eyal abraham
Follow
26
followers
United States
Models
About
Models
25
Tutorials
0
More
Followers
26
Following
1
Likes
11
Following
1
Followers
26
Likes
11
Models
Sort by:
Recent
Recent
Popular
Most liked
Most commented
Most downloaded
Tiger Moth RC motor mount
Motor mount and battery tray extension for Tiger Moth RC
0
44
0
Incidence meter
This project implements an incidence meter to measure airfoil angles on RC planes. Full project on GitHub https://github.com/eyalabraham/incidence-...
2
35
0
Velie Monocoupe RC model 5-cylinder engine dummy
Velie Monocoupe RC model 5-cylinder engine dummy and cowl. Build blog here https://veliemonocoupe.blogspot.com/
10
80
0
Velie Monocoupe RC model wing rib
Velie Monocoupe RC model wing rib template for manufacturing ribs. Build blog here https://veliemonocoupe.blogspot.com/
4
40
0
Macintosh Plus LCD panel support
LCD panel support. Built for this Macintosh Plus restoration project https://sites.google.com/site/eyalabraham/macintosh-plus-revival
1
28
0
Box for circuit board
Box for a PS2 to Mac serial keyboard interface circuit board. The box has an opening for a 6-pin mini DIN connector and a slot for a interface wire...
6
239
0
RGB-to-HDMI circuit board cradle
RGB-to-HDMI circuit board cradle for Macintosh Plus restoration project https://sites.google.com/site/eyalabraham/macintosh-plus-revival
0
26
0
Motor mount for Yard Stick RC plane
Motor mount for Yard Stick RC plane
0
33
0
Propeller balancer
3D printed propeller balancer. All rods are all-thread #6-32. Magnets are 0.25in (6.3mm) Neodymium magnets.
10
85
2
Macintosh Plus speaker holder
Macintosh Plus speaker holder for https://sites.google.com/site/eyalabraham/macintosh-plus-revival project.
0
37
0
SD Card support
Support for an SD card reader for emulator project https://sites.google.com/site/eyalabraham/dragon-32-computer. Bottom screws and E6000 glue for b...
0
27
0
RC plane wing rib template
This is a template for cutting wing ribs from Balsa wood. I created this template by first scanning the rib drawing and using the scanned image to ...
2
97
0
RC Park Flyer wheel
I needed new landing gear wheels for my RC Park Flyer. The wheels are larger in diameter and in width to allow better takeoff and landing performan...
5
82
0
Potentiometer knob
I needed a knob for a potentiometer with a broken axis, so I created this one following a FreeCAD tutorial I saw some time ago. It is a simple desi...
2
212
0
Differential pan-tilt
The Original design idea came from this video https://www.youtube.com/watch?v=Su6O6155UJM. The designer published the 3D CAD files but they were no...
60
856
15
TEAC 14769070-60 stepper motor
TEAC 14769070-60 stepper motor that I plan to use in a pan-tilt project.
2
66
0
Structure for PC expansion card project
A project to revive my old (1984'ish) PC/XT clone motherboard. This is the second pass at this project, first creating a physical structure to prop...
0
32
0
Two-wheel balancing robot drive train
This project is a redo of the drive train for a two-wheel balancing robot. This new geared drive adds a 5:1 reduction ratio over the geared motor ...
5
84
0
DAGU gear motor model
DAGU offset gear motor. Hobby motor model, 3-6V with a no-load current of 200mA, and a stall current of 3A@6V (1.5A@3V), gearbox ratio of 48:1, and...
12
199
0
2.5" Hard Drive (HDD) holder
I added a dual hard drive setup for my desktop to support a RAID mirror set. The PC did not have 2.5" HDD mounting hardware so I decided to design ...
6
82
1
Electromechanical clock
Electromechanical clock printed in blue PLA. Inspired by many and designed around stepper motor and ATtiny85 AVR. More info on this web page https...
18
155
2
Robotic arm modelled after open source uArm
This robotic arm is modelled after the original open source uArm and was adapted to be printed on a 3D printer. This model uses 28BYJ-48 stepper mo...
55
915
1
Gripper for robotic arm
Simple servo driven gripper for a robotic arm project. Uses two GWS PICO-BB servos to drive rotation and gripper claw.
2
160
0
GWS PICO-BB servo and horn
Created the model to use in another project modelled around this micro-servo
0
168
0
1
2
