Autodesk Inventor Users

Hello ,

It's a mold part ?

yes i think is a mold part should be a mold part

What version of Inventor are you using?

Are you wnting a model of just the top plate with the mold details in it or an assembly file containing the top plate, bottom plate and everything else needed?

Assembly files with everything else, with all the parts

inventor 2020

I'm on 2021 sorry

This piece is a troquel, you can make it through extrusions, it is not complex to make, I could help you, just give me the parameters you need.

i use inventor 2020

only the rectangular boards,the big ones are 300x350mm the rest is constructive,it doesnt need some sort of dimensions is kinda free hand there.

• HI, Please put the picture on this page so that everyone can see it.

Sorry , but the site does not allow me to upload all the pictures , but i uploaded them all on imgur. I would post all of them , but the site does not allow me . So, sorry for that !

• 我会挤出一些时间， 尽量在星期一之前把它给你。

• I'll squeeze in some time and try to get it to you by Monday.

I think you can draw inspiration from this files

https://grabcad.com/library/plastic-injection-mold-1-1

Adam, what is your need?

You want to get a 3D model made from that picture?

Here is a picture with proportions 300x350.

If you use Inventor you can place this picture in a 2D sketch and then create the contour of every entity (lines, circles, arcs) over it.

Good luck!

Prof. C. Stancescu

constantin.stancescu@gmail.com

I also used this method when I only had pictures: I insert the picture in AutoCAD, make a rectangle with dimensions 300x350 and overlap it over the edges of the picture as an external dimension, then I measure the sides of the picture and divide by the dimensions I have to find the factor scaling. For example, the picture is 30 mm long but is superimposed on the 300 mm side of the rectangle 30/300 = 0.1 All dimensions then measured on the picture will be multiplied by 0.1. It works very well.