Learn about the GrabCAD Platform

Get to know GrabCAD as an open software platform for Additive Manufacturing

Visit our new homepage

Lastenrad-Tuning

With 20-someething years experience in automotive design I'm now into cargobikes and host a non-profit site with ideas to optimize the usage of your cargobike.

35

followers

Germany

Models

Assembly Aid for simple backrest installation on R+M Multicharger

2 3D-printed clamps are attached to the rack before installing the safety bar, giving enough room to thread the velcro of the backrest through. Pr...

1 5 0

VIA Kraftrad 1 - Attachment Block for easy installation of emergency seat

3D printed Attachment Block to make the installation of the emergency seat in the VIA 1 much more easy. Print standing upright, with higher streng...

1 4 0

Tern GSD Magura Schelle

Half clamp for TERN GSD high beam switch to change from Magura to different brake levers. Print with the logo facing up, use support.

1 20 0

Childseat mount for Omnium Toptube

Bracket, to mount a bicycle seat to the toptube of an Omnium (minimax TI) as a childrens seat. Ride safe and responsibly!

1 18 0

Tex-Lock Key Cover

Cover to enlarge the grip of the slim Tex-Lock Keys for use with gloves or clumsy fingers. Print lying flat on the backside, no supports needed (s...

0 24 0

Pegboard Tool holder collection, universal and bike specific.

Pegboard tool holder collection, universal and bike specific. For Pegboards with 10x10mm holes and 38mm spacing. Essential part is an adapter (Schr...

12 124 0

Bicycle-Wheel Trueing Aid: 1/4"-Adapter for dial gauge

Adapter to mount a dial gauge to a 1/4" threaded camera clamp. See https://lastenrad-tuning.com/lastenrad-hersteller/universell/raeder-zentrieren-...

3 25 0

Omnium Net Hooks for Rack Net with Extender

Hooks for using the Omnium Rack Net with extender

1 22 0

R+M Multitinker/Multicharger Rear light mounting plate

Mounting plate to move the rear light up and further back for better visibility or mounting of turning signals.

0 15 0

Montagehilfe Sitzpolster Bicicapace

Vereinfacht die Montage des Sitzpolster beim Bicicapace Justlong

0 15 0

Omnium E-Cargo Billboard

Billboard (3mm Dibond) for Omnium E-Cargo (size M) with rear stabilisation bracket (3d-printed)

3 21 0

Hinterher obendrauf - Transporting Bikes on a hinterher trailer

Brackets to transport a bike upside down on a hinterher bike trailer. More on https://lastenrad-tuning.com/lastenrad-hersteller/hinterher/radtrans...

0 17 0

Riese & Müller Packster80 raincover clip

Clip to fasten the raincover more easily. Print standing upright. More on https://lastenrad-tuning.com/ladung/kind/verdeck-schnalle-fuer-das-pack...

0 16 0

Riese & Müller Stem-height adjustment tool

Helps adjusting the height of the stem on Riese & Müller adjustable stems (Load, Multitinker, Carrie) without broken fingernails. Print in pla...

0 24 0

Cargobike Logo Keychain for shopping cart

Different brands: Johansson Muli Omnium Radkutsche Riese & Müller More informartion on https://lastenrad-tuning.com/lastenrad-hersteller/unive...

2 20 0

Omnium Light Bridge

Bracket for installing a light on the fender of the Omnium Cargo. Print lying flat on the backside. Assemply instructions (in german) included. M...

2 27 0

Sigma EOX1200 bracket to reposition the display on the Radkutsche Rapid

Bracket to reposition the Sigma EOX1200 display above the stem on the Radkutsche Rapid for better visibility with rain cover. Print standing on th...

2 23 0

Spoke cover clips for Riese & Müller Multicharger

Clips to easily attach the spoke cover on a Riese & Müller Multicharger, replaces most of the velcro strips. Two versions: * Position of the...

1 12 0

Muli cargobike - Support for the raincover

Clamps to attach a longitudinal support to the Muli rain cover to prevent a "birdbath" during rain. Seperated in 2 parts to print without support....

8 43 2

Omnium Racklight

Adapter to attach a LED to the rack. More information on https://lastenrad-tuning.com/lastenrad-hersteller/omnium/florians-omnium-racklight/ Also...

0 19 0

Black Iron Horse IBEX LightBlock

Adapter to get more adjustability for the lights of an Black Iron Horse IBEX. More information on https://lastenrad-tuning.com/lastenrad-herstelle...

5 27 0

Omnium Cargo Fender light bar - update 2025-12

Light bar to attach lights to fork crown and fender on an Omnium Cargo. Updated version with eye bolt for mounting to the fork crown for better st...

6 34 0

Smartphone loop for SP Connect

SP Connect adapter to attach a wrist loop to a smartphone. Print "standing" upright, with 100% infill and support. More information on https://la...

0 23 0

Rackflektor - End Cap for reflector on Omnium Rack

End cap for the Omnium Rack to install a self-adhesive reflector. More information on https://lastenrad-tuning.com/lastenrad-hersteller/omnium/omn...

0 33 0