London, United Kingdom
Staircase and railing
Straight stair case with a single beam running through the middle to support the stairs. Staircase is held in place by 4 bolts bolted into the con...
3D Bi-Plane. Made from 3mm thick material. Could be laser cut from wood or metal. Made in Solidworks 2016 also saved as a STP and IGS
Industrial Metal Chair
Frame of chair made from 70x40mm steel rectangular tubes for the frame, 5mm steel rods to support the cushions, and leather cushions.
Gate opens and closes with the use of an actuator. Gate pivots on 4 bolt bearings.
2000mm Long Roller Table
2m long roller table, could be made longer or shorter to suit needs.
Nissan C34 Stagea Adjustable Camber arm
I removed and measured the stock camber arm off my Stagea then decided to create an adjustable one to take its place. It is adjustable in length of...
Nissan SR20DET Exhaust Manifold
Made from 1.5"OD straight pipe and 1.5"OD bent to a 2" radius. Doesn't like up perfectly with the T3 turbo flange but was the first time I had trie...
Rb25det Rocker Cover
Skyline R33 rocker cover plus spark plug cover, only one rocker done at the moments second one will be updated soon.
Turbo got dimensions from elsewhere. Made with Solidworks 2013
Settlers Of Catan
Was made on SolidWorks 2013. I got the decals for the board from here: http://thepiratebay.sx/torrent/8850360/Settlers_of_Catan_Board_Game_PDF_scan...
3 Piece, 17" 10"wide rim and disk brake
Rotary copied the measurements off two models and found the housing to be small