Learn about the GrabCAD Platform
Get to know GrabCAD as an open software platform for Additive Manufacturing
Visit our new homepage
Home
Control
Shop
Streamline Pro
Partner Program
Print
Community
Log in
Library
Challenges
Groups
Questions
Tutorials
Engineers
Blog
Log in
Nathaniel Sallen
Follow
171
followers
Australia
Models
About
Models
35
Tutorials
0
More
Followers
171
Following
0
Likes
62
Following
0
Followers
171
Likes
62
Models
Sort by:
Recent
Recent
Popular
Most liked
Most commented
Most downloaded
50 mm Tow Eye
This is a basic model of a 50 mm, bolt in, tow eye.
0
41
0
9.00R22.5 Steel Wheel Rim
This is a representation of a steel wheel used on heavy duty commercial vehicles and buses. It has an offset of 175 mm, A PCD of 285 mm, a hub diam...
18
775
0
JIS Stud Mount Wheel Lug Nuts
These are Japanese style, stud piloted, spherical, wheel lug nuts. Similar to what was commonly used on 1990, medium and heavy duty commercial vehi...
7
46
0
Demountable Dual Rear Wheel 10.00 R20
This is a dual rear wheel set up for demountable, or two piece steel rims, on a 5 spoke 28 degree wheel hub and heelless clamp. I was unable to fin...
10
261
0
Anderson Plug SB175 Grey Body
This is a representation of a 175 AMP Anderson quick release connector used for short high current applications. Some of my measurements are differ...
41
1348
0
B-Double Trailer Set
Hello, This is an Australian 36 pallet, 26 meter long combination trailer set used for local and reginal distribution on prescribed routes. This m...
85
1636
5
Semi Trailer Load Binder
This is a mockup of a load binder on an Australian B-Double trailer set. These are placed at the middle of each pallet loaded, to restrain the load...
24
418
0
Plastic Truck & Trailer Mudguard
This is a packaging part made for a B-Double, A-Trailer, with an axle spacing of 1220 mm and 295/80R22.5 Tires. The width is 700 mm to accommodate ...
7
370
1
Macrame Cord Dispenser
This is a model of a device used to easily dispense macrame cord to allow it to be cut to length. My wife was struggling to extend the cord from th...
2
66
0
Curtain Sider 14 Pallet Body
This is a packaging model of a 14 pallet curtain sider rigid truck body. This is not a commercial design and the dimensions and sections are packag...
34
764
3
Curtain Sider, Tautliner Ratchet Tensioner
This is a packaging representation of the old cast style ratchet curtain tensioner used for side loading trucks and trailers in Australia. This is ...
15
256
1
Curtain Sider Latch
This is a model of a typical Tautliner or curtain sider latch. Used to tighten the side curtain straps and retain the load for a side loading truck...
48
693
0
Bull Nose Veranda Model - Victorian Style
This is a model I had to do to finalize the design and get approval for a project putting a bull nose veranda onto the side of our house. This is ...
5
100
0
Verandah mount to house
This is a drawing I had to do for our local council for illustration of how a new bull nose veranda was going to be mounted to our house. I have no...
9
532
0
2.5 kg Australian Fire Extinguisher
This is a model I created from a suppliers unit we were fitting to a vehicle. This was a packaging model and used for concept verification, this is...
65
2337
4
Trailer Kingpin
This model was created for packaging, please refer to the AS/NZS 4968.3:2011 for the design requirements, dimensions and correct application for th...
33
892
0
Tool Box Truck
This was a Tool Box that I modeled to obtain some outside images for a project I was involved in. It was modeled in Solidworks as a sheet metal par...
56
1871
5
Australian Style Mud Guard
This is a mud guard to suit an 11R 22.5 dual tire set with limited axle travel. The model in not complete with all draft angles as it was used for ...
34
552
0
Modern Table
This was a dining table designed for a home environment, very stable as it weighed about 130 kgs
6
141
0
FZ1 Series 2 Chain cleaning and lube bath
This is a bath that I made up to help clean and lube the cabin on my 08 Yamaha FZ1. Bath catches chain cleaner fluid that drops off the chain and t...
3
67
1
Beavertail Truck Body flat with rear loading ramps
This is a truck body that was modelled for packaging and has not been designed to any load rating or design standard. Some parts are downloaded fro...
44
705
5
LED Side Marker Lamp
This is a model of a side marker lamp used on truck bodies and trailers in Australia, it is bi colour and would give red light rearwards and amber ...
8
279
0
Truck Recovery Tilt Tray
This is a model I completed for some packaging requirements. It was designed for a FSR MWB but has designs from heavier vehicles. No stress or mech...
84
1229
7
Flat 7 pin Trailer Electrical Connector
This is a socket modelled for packaging requirements and is not to the standard completely or a model that is ready for manufacture.
10
244
1
1
2
