I am using the Arch workbench in FreeCAD to model my kitchen. Where do I fined kitchen cabinet models? I am looking for modular cabinets from Home Depot and other sources?
2 Answers
Maybe take a look on Turbosquid : https://www.turbosquid.com/fr/3d-model/kitchen ; if there are any that are not too expensive.
Here it seem to have free model for kitchen design : https://www.3dcadbrowser.com/3dmodels.aspx?category=84
And if you want to find FreeCAD modellers to help you, there is a 'Job offers' section on the User Forum: https://forum.freecadweb.org/viewforum.php?f=31. It can help you to have a base that you can modify later with FreeCAD, if you ask for the native files.
Hi Shah, i design furniture, if you wnat i can help you, dm me
Hi Shah, I also design Modular Kitchens and wardrobes, and basically all from Timber. Now, you have to consider the hinges you are going to use.
Secondly, you have to know, are you going to use boards or Wood for your kitchen.
When that is done, the breadth of the big lower cabinet, double shatter, should not exceed 900mm, so that the shatter can be 450mm, but you have to leave allowance for opening. Then the small cabinets will be half of the 900mm. Then for the corner cabinet, 1100mm because the depth of the cabinet is going to be between 550 to 570mm, and the 570mm is inclusive of the shatter. With that said, why is the corner cabinet 1100mm, because of the dead panel area and also a filler to be able to open the shatter with. Hope this is useful. In case of anything, am free to answer relevant questions here.