The Mach3 Controller Post processor for Various CNC machine

5 answers

• 
  Sourbh over 3 years ago

  MACH 3 , 5 Axis mill set

  Answered with a tutorial: https://grabcad.com/tutorials/the-mach3-controller-post-processor-for-various-cnc-machine--1

  Attachments

  1024-five-axis, 92.4 KB
  Download

  1. 
     Igor Marković almost 2 years ago

     Hi. Im trying to add this postprocc in SolidCAM, but without success. Any idea what I missing?

• 
  Sourbh over 3 years ago

  Hello friend this is the first one i am sharing with you all,

  Details is:-
  1.) Mach 3 Lathe XR2
  2.) Mach Wire-EDM_or_Foam
  3.) Mach3-Mill XR2_4th-5th

  //Thanks and if you have any doubts and question than just message me//

  Attachments

  Mach_3_Lathe_XR2.PST, 2.36 KB
  Download

  Mach_Wire-EDM_or_Foam.PST, 1.43 KB
  Download

  Mach3-Mill_XR2_4th-5th.PST, 2.01 KB
  Download

  1. 
     Sourbh almost 2 years ago

     Master Cam X7 campatible but you can modify it for any version according to your mode of use.

     Thanks

  2. 
     Vervenne Rik almost 2 years ago

     is the Mach3-Mill XR2_4th-5th A 5-axis post? Could it work for InventorCAM/SolidCAM? I have a table/table (trunion) setup.

  3. 
     Sourbh almost 2 years ago

     Hello @vervenne, Just you need to edit the three line to make it work with your Machine.

     Send me the tool configuration of your machine so that i can able to remodify it with your machine's suitability.

     Thanks

  4. 
     Igor Marković almost 2 years ago

     For which version of Mastercam is this posts ?

  5. 
     Sourbh almost 3 years ago

     It's working dear, how you try to open it?

     Is you are using the Power Mill to verify it?

     If you wanna edit this than simply open with Notepad.

     Thanks,
     If you have any other doubt than message me or if its not clear than also message me i will try my best to help you completely.!!

  6. 
     Moshe Gadid almost 3 years ago

     can't open the files. can you upload it in rar?

• 
  Sourbh over 3 years ago

  FANUC Series:-

  This post is supporting to :

  1. Only suitable for 3 axis
  2. Arc output in 'I J K' format
  3. MM or INCH type output
  4. Drilling Cycles supported :

  Single peck G81
  Deep Drill G82
  Chip Break G83
  Tapping G84
  Ream G85
  Counter Bore G86
  Bore 3 G87
  Bore 4 G88
  Bore 5 G89

  This post is not-supporting to :

  1. Splinemill is not supported
  2. Drilling cycles which are not supported :

  Drill Deep 2
  Rigid Tapping
  Helical
  Reverse Helical
  Helical Clockwise
  Reverse Helical Clockwise

  Attachments

  fanuc-Re_programmed.pmopt, 56.6 KB
  Download

  1. 
     Ronivon Silva over 1 year ago

     problem with download, xml page after click download

• 
  Sourbh over 3 years ago

  The Many person were using the bob cad for the program generation,

  So here is the only one post processor for the bob cad interacted with Deckel Maho my favourite CNC..!!

  Deckel FP3NC
  //Thanks//

  Attachments

  Deckel_FP3NC.exe, 427 KB
  Download

• 
  Muhammad Muzammil mukhtar over 1 year ago

  Hello
  can any one give me the post processor "IMS post version 7.4" for catia and mach 3 mill link