Feed

Tutorial how to model a propelling pencil (30)

Tutorial by Aykut Dana
Small

ASSEMBLY

  1. Step 1:

    open a new assembly file

  2. Step 2:

    click on insert new parts--browse

  3. Step 3:

    select part 1

  4. Step 4:

    part 1 ( I hope you named the files as I said. if not, found the parts that you see below and insert them:)

  5. Step 5:

    insert part 2

  6. Step 6:

    click on shown blue surface then click on matte button

  7. Step 7:

    matte command is activated now as you see

  8. Step 8:

    click on shown surface of part 1. they will be concentric automaticly

  9. Step 9:

    now click on shown button. because part 2 is reverse

  10. Step 10:

    confirm that

  11. Step 11:

    now move the part by dragging

  12. Step 12:

    select the surface

  13. Step 13:

    then select this surface

  14. Step 14:

    confirm that..

  15. Step 15:

    insert part 3

  16. Step 16:

    just drop it

  17. Step 17:

    insert part 4

  18. Step 18:

    click on the shown surface and use matte command

  19. Step 19:

    then click on that surface and confirm it

  20. Step 20:

    select the surface. ( don't close mate command )

  21. Step 21:

    select other shown surface and ok

    next: http://grabcad.com/questions/tutorial-how-to-model-a-propelling-pencil-31

Comments

Please log in to add comments