Tutorials

Small

New approach in designing and modelling an Oil pump using Inventor 2016

34 5 Intermediate
Step by step tutorial videos, showing the easy way of modelling an Oil pump using Inventor 2016, how to create the parts, assemble them and drive gears, new approach make use of most Inventor specs, design center with some new tips & tricks ...
Small

Some Keyshot Tips

27 9 Beginner
Keyshot is pretty easy to use, but there are some tips and tricks which can boost the quality of your output. These are some of the tips I've learned. I pass them on to you and hope they give a boost to your rendering abilities.
Small

How To Model Complex Sheet Metal Parts in SOLIDWORKS

25 6 Beginner
A step-by-step guide on how to create the shade holder part in the lamp model shown keeping cut outs in curved surfaces straight and true for a genuine flat pattern.
Small

Helical Gear Shaft Tutorial

25 10 Beginner
Hello, CAD lovers! Today we're going to learn how to make a Helical Gear Shaft. If you are new to this profile, please leave a like button on this tutorial and follow my profile for more helpful content.
Small

How to make a rendering with SolidWorks

24 0 Intermediate
How to make a rendering with SolidWorks
Small

Animation and Rendering with Simlab Composer

16 13 Intermediate
Sometimes I make animations for models published by other users, using Simlab Composer. People always ask me how I make them, so this is a simple example. I used the model https://grabcad.com/library/mini-vise-2, by https://grabcad.com/andre.barros-2.
Small

solidworks for beginners

15 3 Beginner
a simple exercises for the beginners in solid works
Small

Some Tips for Dealing With Splines

13 1 Beginner
A lot of new SOLIDWORKS users are creating a computer mouse based off of some videos on Youtube. This is great, welcome to SOLIDWORKS. I wish there were a Youtube to learn from when I started! This is one example of the mouse, but there are dozens of others: https://grabcad.com/library/mouse-199 The tutorial is here: https://www.youtube.com/watch?v=HlTXEHjqWRI like many, it lacks audio. I truly appreciate the time and effort that goes into tutorials, so this is not to bash or complain. Follow along with the video, and you will learn. I just want you to see that there are a few issues which can occur. This problem arises around the five minute mark.
Small

How to create block in AutoCAD?

13 4 Beginner
In my first tutorial on GrabCAD I will show you how to create Blocks in AutoCAD. It is nothing complicated so lets start.
Small

Gear design & drawing in SolidWorks

12 5 Beginner
In this tutorial i design a simple Gear. Just the basics. I hope it is ok. If you have any questions feel free to ask.
Small

Create Basketball Using CREO 3.0

10 5 Expert
Software: PTC CREO PARAMETRIC 3.0
Small

Simple Spring in PTC CREO PARAMETRIC 3.0

10 1 Expert
simple spring creation by using helical sweep function.
Small

How to draw tangent arcs between two circles in AutoCAD?

10 2 Beginner
In this tutorial I m going to show you the easiest way to draw arc between two circles when you need specific radius.
Small

Modeling Chain in SolidWorks

9 4 Beginner
https://youtu.be/JpKfs0l07bo
Small

Solidworks tutorial part design 10

9 0 Beginner
Solidworks tutorial part design 10
Small

Spring in SolidWorks

9 5 Intermediate
In this tutorial i will make a torsion spring the same as you can see in my models. I hope it will be halpefull for you.
Small

How to FDM Print for Part Sliding Clearance

9 1 Intermediate
If you are 3D printing parts that have to fit/slide together after printing, you will need to put some sort of clearance between those parts in your CAD system. A good starting place is a clearance 2x the layer height you are going to print at, but you should make a few smaller test prints at different clearances to see if the 2x layer height rule holds for your particular situation and orientation. Have fun and happy printing!
Small

Modelling of Impeller

8 3 Beginner
Modelling of Impeller
Small

Absorber

8 0 Beginner
Please find this link in youtube........... https://www.youtube.com/watch?v=osW5RnYIVoc
Small

Learn Catia V5- Water Mug or Cup | Generative Shape Design

8 2 Beginner
Catia Tutorial- Generative Shape Design for Beginners.
Small

Tutorial: How to model involute gears in SolidWorks and show design intent.

8 6 Beginner
The model from this tutorial is found here: http://grabcad.com/library/involute-gear-design-from-scratch-1
Small

Tutorial how to make engine part 1

8 0 Beginner
Connecting Rod file: http://grabcad.com/library/connecting-rod--15
Small

How do I scale a model in Inventor?

8 3 Beginner
:)
Small

PROGRESSIVE DIE DESIGN

7 0 Beginner
Speed at 200% (Use YouTube setting to slowing down) 100 likes and I will share the all process design. See video: https://youtu.be/2y88XaklBdQ
Small

Learn to Make Diamond.

7 2 Expert
Learn to Make Diamond.
Small

How do I convert STL graphics to a solid model?

7 9 Beginner
Try this. Worked fine for me.
Small

Using Solidworks Configurations In Parts And At Assembly Level

7 2 Intermediate
Using this Example of a Basic Hydraulic Ram. An easy to follow tutorial on creating and enabling part configurations and how to follow them through to assembly level resulting in more diverse parts and dynamic 3D models.
Small

PLASTIC BOTTLE DESIGN

6 0 Intermediate
See video: https://www.youtube.com/watch?v=5ErOKkcZXWc&ab_channel=ManuelValenzuela
Small

SolidWORKS Intersect Tool

6 2 Intermediate
This tutorial shows how to use the Intersect command in SolidWORKS How to convert a part with a solid and a surface body into a single solid body This tutorial is in response to: https://grabcad.com/questions/best-way-to-turn-this-solid-surface-into-one-solid