Feed

Tutorial: How to stop Round feature at Reference with Creo Parametric

Tutorial by Vladimir Palffy
Small

A few steps for quick tutorial: How to create Round feature on edge Stopped by Reference point

  1. Step 1:

    Create custom model / shape

  2. Step 2:

    Create Point - this point will be reference point for Round feature

  3. Step 3:

    You can define Ratio or Real value for points position

  4. Step 4:

    I have choosed real value (125mm)

  5. Step 5:

    Create Round feature

  6. Step 6:

    Select Edge for Round feature and set custom value

  7. Step 7:

    In the Dashboard select "Switch to transition mode" button

  8. Step 8:

    Select left end of Round and then you can use Right mouse button >> Stop at Reference or ...

  9. Step 9:

    ... or you can select drop down menu from Dashboard >> Stop at Reference

  10. Step 10:

    Select existing Point. Note; you can select existing Datum plane too for this reference

  11. Step 11:

    System create Round feature stoped at selected reference for you >> Finish Round feature

  12. Step 12:

    Created Round feature on edge Stopped by Reference point

  13. Step 13:

    You can create second round on same edge

Comments

Please log in to add comments