Feed

Tutorial - Modeling Apple 3D logo in SolidWorks?

Tutorial by Sudhir Gill
Small

This is tutorial on modeling 3D Apple ® Logo modeled by Saeed Kazemi. I'm not good as the author but tried to express what he did in simple manner.

  1. Step 1:

    Front plane >> sketch.

  2. Step 2:

    Draw this profile using spline tool. If needed use fit spline tool.

  3. Step 3:

    Revolve the profile.

  4. Step 4:

    We have the Apple body.

  5. Step 5:

    Select the sketch again and click Extruded boss.

  6. Step 6:

    Select the contour of leaf.

  7. Step 7:

    Extrude it by mid-plane.

  8. Step 8:

    Front plane >> Sketch.

  9. Step 9:

    Draw a circle.

  10. Step 10:

    Extruded cut by through all in both direction. Click OK and we have bited the Apple.

  11. Step 11:

    Click Dome tool.

  12. Step 12:

    Select both faces of the leaves and create a dome feature.

  13. Step 13:

    Front plane >> Sketch.

  14. Step 14:

    Convert entities.

  15. Step 15:

    Convert all sketches.

  16. Step 16:

    Mirror the apple profile. And generate a fit spline using the apple profile.

  17. Step 17:

    Trim the bite.

  18. Step 18:

    Scale entities.

  19. Step 19:

    Scale down the sketch about the centre of the line.

  20. Step 20:

    Zoom in little bit.

  21. Step 21:

    Create fit spline for the whole apple profile and delete the center line.

  22. Step 22:

    Extruded cut form surface plane. Select the apple surface as the surface and blind cut.

  23. Step 23:

    Click OK and the apple logo is generated.

Comments

Please log in to add comments