Feed

Tutorial - Modeling Chain Drive in SolidWorks?

Tutorial by Sudhir Gill
Small

Here is the tutorial.

  1. Step 1:

    Front plane >> Sketch.

  2. Step 2:

    Draw a circle.

  3. Step 3:

    Extrude it.

  4. Step 4:

    Front face >> Sketch.

  5. Step 5:

    Draw this profile.

  6. Step 6:

    Extrude cut it.

  7. Step 7:

    Select Circular pattern tool under features tab.

  8. Step 8:

    About the circular edge pattern the cut extrude.

  9. Step 9:

    Front face >> Sketch.

  10. Step 10:

    Draw a circle.

  11. Step 11:

    Extrude cut it through the body.

  12. Step 12:

    Click OK.

  13. Step 13:

    Fillet the edges of the teeth.

  14. Step 14:

    Now Geometry pattern it about the circular edge again same number of times.

  15. Step 15:

    We have the drive model.

Comments

Please log in to add comments