Feed

Tutorial - Modeling Checkers board in SolidWorks?

Tutorial by Sudhir Gill
Small

Here is the tutorial.

  1. Step 1:

    Top plane>>Sketch.

  2. Step 2:

    Draw a box of 250x250.

  3. Step 3:

    Extrude it by 20mm.

  4. Step 4:

    Shell.

  5. Step 5:

    Select lower face and distance be 5mm.

  6. Step 6:

    Fillet the otuer edges by 5mm.

  7. Step 7:

    Top face>>Sketch.

  8. Step 8:

    Draw a Square of 200x200.

  9. Step 9:

    Convert it to construction geometry.

  10. Step 10:

    Draw a box and it's length be 1/8 of the bigger box height.

  11. Step 11:

    Linear Sketch pattern.

  12. Step 12:

    Select the box to pattern about x-axis at distance of 25mm 8 times.

  13. Step 13:

    Again Linear patttern all boxes about the y-axis 8 times at 25mm.

  14. Step 14:

    Exit the sketch. Curves>>Project Curves.

  15. Step 15:

    Select the sketch and top face.

  16. Step 16:

    Top Face>>Sketch.

  17. Step 17:

    Draw a center-point rectangle of 220mm.

  18. Step 18:

    Split line it on the top face too.

  19. Step 19:

    Select the face and then appearence.

  20. Step 20:

    Select Face.

  21. Step 21:

    Select all Odd faces.

  22. Step 22:

    Color them Orange.

  23. Step 23:

    Similarily color all even boxes white.

  24. Step 24:

    The outer area be black.

  25. Step 25:

    The rest of body be wooden appearence.

  26. Step 26:

    And we have the board prepared

Comments

Please log in to add comments