Feed

Tutorial - Modeling Flywheel in SolidWorks?

Tutorial by Sudhir Gill
Small

Here is the tutorial.

  1. Step 1:

    Front plane >> sketch.

  2. Step 2:

    Draw this profile.

  3. Step 3:

    Revolve it.

  4. Step 4:

    Now we have the circular base.

  5. Step 5:

    Top plane >> Sketch.

  6. Step 6:

    Draw this profile.

  7. Step 7:

    Extrude it from offset at 38mm to up to body.

  8. Step 8:

    Create a axis about the origin and the top plane.

  9. Step 9:

    Fillet the fin by 5mm.

  10. Step 10:

    Circular pattern.

  11. Step 11:

    Select the boss-extrude & fillet as the feature to pattern about the axis1 16 times.

  12. Step 12:

    Top plane>>Sketch.

  13. Step 13:

    Draw 4 circles at P.C.D 61mm of 8mm dia.

  14. Step 14:

    Extrude them from offset 18mm to up to body.

  15. Step 15:

    Top plane>>Sketch.

  16. Step 16:

    Draw 4 circles of 4mm dia concentric to the previous extrusions.

  17. Step 17:

    Extruded cut by through all.

  18. Step 18:

    We have the flywheel body.

Comments

Please log in to add comments