Feed

Tutorial - Modeling wing nut in SolidWorks?

Tutorial by Sudhir Gill
Small

Here is the tutorial.

  1. Step 1:

    Top plane>>Sketch.

  2. Step 2:

    Draw a circle of 20mm dia.

  3. Step 3:

    Exit the sketch. Now go to reference geometry >> plane.

  4. Step 4:

    Offset Top plane by 10mm.

  5. Step 5:

    Plane1>>sketch.

  6. Step 6:

    Draw another circle of 15mm dia.

  7. Step 7:

    Exit the sketch. Click Lofted boss/base.

  8. Step 8:

    Select both circles and adjust the connectors.

  9. Step 9:

    Top face>>Sketch.

  10. Step 10:

    Draw a circle of 10mm dia.

  11. Step 11:

    Extrude cut it by through all.

  12. Step 12:

    Chamfer.

  13. Step 13:

    Chamfer both internal edges by .5mm and 45º.

  14. Step 14:

    Front plane>>Sketch.

  15. Step 15:

    Draw this profile.

  16. Step 16:

    Extrude it by 2mm in mid-plane.

  17. Step 17:

    Fillet.

  18. Step 18:

    Select both edges at 1mm radius.

  19. Step 19:

    Mirror.

  20. Step 20:

    About right plane mirror the boss-extrude2 and fillet feature.

  21. Step 21:

    We have the part body.

Comments

Please log in to add comments