Feed

TUTORIAL: Routing - Pipes and Tubes in Solidworks

Tutorial by Victor Bonavarte 6779
Small

TUTORIAL: Routing - Pipes and Tubes in Solidworks

  1. Step 1:

    I will make it in assembly

  2. Step 2:

    The first thing you should do.

    select Tools - Add Ins - and select solidworks Routing

  3. Step 3:

    and select a design library - Routing - Piping - flange - choose one, here I use the slip on weld flange.

  4. Step 4:

    and select the configuration you want. here I am using the first

  5. Step 5:

    make your settings. then ok.

  6. Step 6:

    and will appear as in the picture, you can slide the line according your dimensions ..

  7. Step 7:

    after that the result will be like this, and forming pipe

  8. Step 8:

    then I added a flange back

  9. Step 9:

    then I added a back flange valves in part.

  10. Step 10:

    the same as that to step 6, and then click on flange face - right click and select add route.

  11. Step 11:

    and will display the image like this, then I will make the line manually, because it does not use the "auto route"

  12. Step 12:

    The line that I created manually. and it can do to suit your needs ..

  13. Step 13:

    and after the exit, the result is like this.

    I hope this tutorial is useful for you to learn ..

    thank you.

Comments

Please log in to add comments