Tutorials

  • Drafting ×
  • Assemblies ×
  • Simulation & CAE ×
  • Process Simulation ×

Fatigue Crack Growth Analysis of Modified Compact-Tension Specimen - ANSYS Workbench

Semih Tinmaz
in FEM
84 15 Intermediate
This tutorial includes step-by-step fatigue crack analysis of Modified Compact-Tension Specimen.
spaceclaim computer aided engineering finite element analysis fracture mechanics paris law ansys workbench fatigue crack fatigue life

Amazing Dynamic foldable tabel in solidworks

Amit Mourya
in Assemblies
72 6 Beginner
Support us on paypal so we can create better content : paypal.me/nobodyknow137 circular table is folding here is shown it is quite interesting new mechanism The advantage of this mechanism it take less space as compare to other it is easy to fold if you compare with other ones easy to fold less space good interior design material interior design cool impression on guest cool solidworks project for dynamic analysis
SOLIDWORKS interior analysis motion animation design interesting foldable dynamic solidworks table folding

Cap screws and machine screws

dea
in Drafting
69 12 Intermediate
Cap screws and machine screws are similar in shape, differing only in their relative sizes. Machine screws are usually smaller in size, compared to cap screws. These are used for fastening two parts, one with clearance hole and the other with tapped hole. The clearance of the unthreaded hole need not be shown on the drawing as its presence is obvious. Figure 5.24 shows different types of cap and machine screws, with proportions marked Cap screws are produced in finish form and are used on machines where accuracy and appearance are important. As cap screws are inferior to studs, they are used only on machines requiring few adjustments and are not suitable where frequent removal is necessary. These are produced in different diameters, upto a maximum of 100 mm and lengths 250 mm. Machine screws are produced with a naturally bright finish and are not heat treated. They are particularly adopted for screwing into thin materials and the smaller ones are threaded throughout the length. They are used in fire-arms, jigs, fixture and dies. They are produced in different diameters upto a maximum of 20 mm and lengths upto 50 mm.
Autodesk Inventor screw cap

Spur Gear Set - Stress Evaluation

Semih Tinmaz
in FEM
58 0 Beginner
Spur gears have their teeth cut parallel to the axis of the shaft on which the gears are mounted, transmitting power between the parallel shafts. To maintain a constant angular velocity ratio, two meshing gears must satisfy a fundamental law of gearing: the shape of the teeth must be such that the common normal at the point of contact between two teeth must always pass through a fixed point on the line of centers. The contact point is called the pitch point. The goal is to assess the maximum stress during the transmission of the torque. By engineering judgement, the maximum stress occurs either at a contact point or at the root of a tooth due to the bending of the tooth. Since there is no restriction of deformation in the depth direction, i.e.,the gears are free to expand (or contract) in the depth direction, so it is modeled as a plane stress problem.
ansys workbench stress analysis transmission gears gear finite element analysis

Side Pole Test - High Speed Impact - Explicit Dynamics - ANSYS Workbench

Semih Tinmaz
in FEM
54 0 Intermediate
Explicit dynamics is a time integration method used to perform dynamic simulations when speed is important. Explicit dynamics account for quickly changing conditions or discontinuous events, such as free falls, high-speed impacts, and applied loads. Because these “nonlinear dynamics” are integrated into the simulation, explicit dynamics is the preferred choice for simulating highly transient physical phenomena. Some side impacts involve a vehicle travelling sideways into rigid roadside objects such as trees or poles. Often this is the result of a loss of control on the part of the driver, owing to speeding, misjudgement of a corner or because of a skid in slippery conditions.
high-speed impact impact finite element analysis explicit dynamics ansys workbench side pole test crash test

Topology Optimization of Triangular Bracket - ANSYS Workbench

Semih Tinmaz
in FEM
53 2 Intermediate
Topology optimization is a mathematical method which spatially optimizes the distribution of material within a defined domain, by fulfilling given constraints previously established and minimizing a predefined cost function. Main aim of this tutorial is optimizing and decreasing the material density of the triangular bracket as 50% by topology optimization.
ansys workbench ansys spaceclaim topology optimization topology

SOLIDWORKS - Assembling A Mechanism, With Motion Analysis and Tracing Point of a Motion of Mechanism.

Ahmed ElPrince
in Assemblies
50 0 Expert
SOLIDWORKS Motion Analysis Tutorial - Assembling A Mechanism ((Trammel of Archimedes-Ellipse Generator Mechanism)),With Motion Analysis and Tracing Point of a Motion of Mechanism After Watching This Video and applying with me You Will Understand Standard Mates ((with using Shortcuts)) ---Trammel of Archimedes Mechanism ( You Can Download The Parts From Here ) https://grabcad.com/library/trammel-o... - How To Add Motor in Motion Analysis. - How To Make Mechanism Tracing. - If This Video Makes You Understand S.Thing New Please Like it & Subscribe For More. - And if You Have Any Questions or Any Suggestions Write a Comment.!
SOLIDWORKS assembly solidworks study point tracing analysis motion mechanism

(VIDEO TUTORIAL) Solidworks Tutorial #155 How to Design a JET GAS TURBINE Assembly (Engine) in Solidworks Easy Design

Praveen Kumar
in Assemblies
49 9 Intermediate
Full Assembly Jet Gas Turbine Engine . Part Two Available on our YouTube Channel................. I hope you like this Tutorials This Tutorial Made by Request for Collage Students I'm always upload easy way drawing not hard. And unique trick friends. So please Subscribe & Share every Friends.
SOLIDWORKS mechanical engineering rendering modeling design assembly solidworks

{​VIDEO Tutorial}​ Industry Robot Arm

Mr Hieu Phuong
in Assemblies
48 1 Beginner
Video Tutorial series teaching you how to create an Industry Robot Arm!
SOLIDWORKS industry assembly arm robotic learn 2019 tutorial solidworks

Planar Seal Simulation with Hyperelastic Experimental Data (Mooney-Rivlin Hyperelastic Model)

Semih Tinmaz
in FEM
47 0 Intermediate
The seal which is used in the door of applications from automotive industries. The seal is a long strip of rubber and it will be modeled as a plane strain problem. A series of material tests has been conducted, including the uni-axial tensile test, the bi-axial tensile test and the shear test. A series of trials of data fitting shows that, for these material testing data, the two-parameter "Mooney-Rivlin Hyperelastic Model" fits the data better than other models. It is decided to use Two-Parameter Mooney-Rivlin Model. The unit system used in this tutorial is "U.S. Customary (in-lbm-lbf-s)".
finite element analysis ansys workbench mooney-rivlin model planar seal test hyperelasticity

Static Crack Growth Analysis of ARCAN Specimen - ANSYS Workbench

Semih Tinmaz
in FEM
45 0 Intermediate
This tutorial includes step-by-step static crack growth analysis of ARCAN Specimen.
ansys workbench fatigue life fatigue crack fracture mechanics finite element analysis computer aided engineering spaceclaim

TURBOFAN | TURBINE IN CATIA

Avnish Kumar (अवनीश कुमार )
in Assemblies
44 12 Expert
The Rolls-Royce Trent 900 is a high bypass turbofan produced by Rolls-Royce plc to power the Airbus A380, competing with the Engine Alliance GP7000. Initially proposed for the Boeing 747-500/600X in July 1996, this first application was later abandoned but it was offered for the A3XX, launched as the A380 in December 2000.
CATIA autocad solidwork v6 v5 catia turbofan turbine

[Tutorial Video] Servo Motor Assembly

Mr Hieu Phuong
in Assemblies
40 1 Beginner
Servo Motor Assembly
SOLIDWORKS

POWER SURFACE COMMAND

Fatih Pars
in Assemblies
36 2 Expert
Easy surface drawings are possible with Power Surface...
SOLIDWORKS power surface

Bird Flying spur Gear Mechanism in Solidworks

Amit Mourya
in Assemblies
36 2 Intermediate
Our Facebook Page: https://www.facebook.com/EngineeringExplanation Our website: www.engineerknow.com SUPPORT US PAYPAL SO THIS CHANNEL CAN PRODUCE MORE AND BETTER CONTENT : payapl.me/nobodyknow137 FREE COURSE LINK SOLIDWORKS BEGINNER TO ADVANCE: https://youtu.be/iYYHmvnlSQo FREE CATIA COURSE LINK:https://youtu.be/CXMxttQNHuQ SOLIDWORKS ANIMATION AND MOTION ANALYSIS COURSE https://www.udemy.com/course/solidworks-animation-and-motion-analysis/?referralCode=8F40E7F83856CFF0C5FE [FREE]SOLIDWORKS SIMULATION COURSE FOR BEGINNERS: https://youtu.be/XJ_BcNbx_SE our new Youtube channel : Engineerknow : [ for understanding how the machine works and other engineering things] https://www.youtube.com/channel/UCU5LqyPgX7E8ri4G8ag9xZQ Mechanical Coder : [Coding in Python for mechanical engineers] https://www.youtube.com/channel/UC__7TWjURc7KnChqoQrAYoQ for INDIAN ONLY : https://www.youtube.com/channel/UCDws0ifI1mdQHgJWUSBzrOA
SOLIDWORKS bird flapping mechanism flying bird mechanis
White Stratasys Logo White GrabCAD Logo
© 2025 Stratasys Inc.
ABOUT US
RESOURCES
Support
SOCIAL
Streamline Pro
Control
Print
Pro
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.