Amr Shaaban

110

followers

Cairo, Egypt

Tutorials

Sort by: Recent

Ansys-Dynamic analysis of a Racing vehicle chassis

Amr Shaaban
in FEM
1 1 Expert
English subtitles added
chassis vehicle dynamics ansys

Static and thermal analyses of a mixing pump using Ansys

Amr Shaaban
in FEM
2 0 Intermediate
.
ansys thermal analysis static

Introduction to Finite Element Analysis

Amr Shaaban
in FEM
4 0 Beginner
This session covers the following: -Survey on conventional analytical methods (Hand calculations) -Evolution of FEM (Historical background) -Definition of FEM and theoretical background -Different types of FE analyses -1D, 2D, and 3D elements -Model fidelity -Mesh controls -Steps of solving FE models -Pre-processing’s -Local and global systems -DOF’s concept -Formation of stiffness matrix -Matrix inversion and matrix transformation -Linking the knowledge with practical life
abaqus ansys fea fem

Strucutural Optimization Analysis-Ansys Design Explorer

Amr Shaaban
in FEM
0 0 Expert
This tutorial focuses on optimization analysis to static analysis application. 1-Deciding input & output variables 2-What if analysis 3-Design points 4-DOE 5-Defining boundaries 6-Response surfaces 7-Sensetivity graphs 8-Defining objective function and constrains. 9-Validate the candidates
analysis static experiment design optimization ansys

Simulation of Incremental Sheet Forming-Ansys & Lsdyna

Amr Shaaban
in FEM
5 0 Expert
This tutorial covers the following: 1-Definition of ISF process. 2-Modeling the blank and tool using DM 3-Meshing the Blank 4-Generating (.k file) via Ansys explicit Ls-dyna export 5-Boundary conditions 6-Contact controls 7-Shell controls 8-mass scaling 9-section ID 10-Database controls 11-How to run the file
lsdyna forming metal isf explicit ansys

Ansys-Transient Response of a Structure

Amr Shaaban
in FEM
2 0 Intermediate
This tutorial covers the following: 1-Revision on fundamentals discussed on session2 2-Comparing transient module when linked and when not linked to modal. 3-Studying various techniques to define damping on Ansys 4-Time steps concept. 5-Obtaining response and interpreting results
dynamic response transient ansys

Ansys-Steady State Response of a Structure

Amr Shaaban
in FEM
1 1 Intermediate
This Tutorial covers the following: 1-Harmonic module, linked and not linked to modal analysis. 2-Frequency range of interest. 3-Load function. 4-Obtaining the FRF and interpreting results.
dynamic state steady ansys

Natural Frequencies & Mode Shapes of a Structure

Amr Shaaban
in FEM
2 1 Intermediate
This tutorial focuses on the following: Mode shapes Mass participation Factor Modal Effective Mass Natural Frequencies Parametric Design
shapes mode dynamic ansys

Ansys-Design modeler-3D curve

Amr Shaaban
in FEM
0 0 Beginner
Creating a 3D curve in Ansys-DM
model 3d ansys

Design of a Pressure Vessel Cap-Axis symmetric

Amr Shaaban
in FEM
0 0 Intermediate
A comparison of 3 analysis methods while designing a pressure vessel cap: 1-Full model 2-Axis-symmetric 2D 3-Axis-symmetric 3D
axis-symmetric analysis static ansys

Stress & Thermal Analysis of a Pump Mixture

Amr Shaaban
in FEM
1 2 Beginner
This tutorial studies the behaviour of a pump mixture subjected to static loads and thermal stresses acting simultaneously. Material definition Contacts Meshing settings Torque, Pressure & Bearing loads Steady state thermal settings
analysis thermal fem ansys

Ansys-Design of a Bolted Connection

Amr Shaaban
in FEM
0 0 Beginner
This tutorial covers the following: -Basic knowledge of bolted connections -Bolts' pretension -Contacts definition -Multi-zone and mapped face meshing -Assembly and working loads steps -Contact tools -Discussion on results.
connection bolted anlaysis static ansys fem

Ansys-Elastcity Analysis & Parametic Design

Amr Shaaban
in FEM
0 0 Beginner
This tutorial covers the following: -Analytical study of the cantilever -Validation of FE results -Parametric design study
fem analysis static ansys

Ansys WB-Static Analysis-Truss

Amr Shaaban
in FEM
0 0 Beginner
This is a 1D element static analysis tutorial. A simple truss consists of two links and three nodes is solved using Ansys Workbench.
truss fem analysis static ansys

Ansys APDL-Static Analysis-Truss

Amr Shaaban
in FEM
0 0 Beginner
A 1D element static analysis tutorial. A simple truss consists of two links and three nodes is solved using Ansys APDL.
truss analysis static apdl ansys
White Stratasys Logo White GrabCAD Logo
© 2025 Stratasys Inc.
ABOUT US
RESOURCES
Support
SOCIAL
Streamline Pro
Control
Print
Pro
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.