Show off your skills and solve real design problems
MakerBot and GrabCAD challenge you to design a futuristic vehicle that would exist in the year 2040!
Create your own 2040 vehicle design. How might we travel in the future? Air, Surface, Water, Space. Explore designs that are optimized for 3D printing and can be assembled as beautiful display models.
Using solid models or thin walls (1.5-2.0mm) of parts and assemblies to create cars, planes, spacecraft, ships, etc. that would exist in the year 2040.
Model parts should fit, be scaled to or be cut into sections of no greater than 28.5 x 15.3 x 15.5 cm.
Assembly can be via snap fit, bolts, screws or glue. See www.makerbot.com for more information.
Models can be done in any CAD software as long as .step or .iges and .stl files are also uploaded. Renders/Screenshots are also required.
Tag your model with “replicator2”. Only entries with valid tag will participate!
The challenge is open to everyone except GrabCAD and MakerBot employees.
Team entries are welcome. In case of team win, prize will be transferred to team leader who is solely responsible for splitting it among team members.
You can submit several entries.
Only entries uploaded to GrabCAD library through this challenge page here will participate in the competition.
Challenge participants are also strongly encouraged to post on www.Thingiverse.com – where .stl files should be posted under (http://creativecommons.org/licenses/by/3.0/). See this example : www.thingiverse.com/thing:31686
By entering this competition, you
1. Warrant that the work is your original work.
2. To the best of your knowledge, it is not, and has not been in production or otherwise previously published or exhibited.
3. Neither the work nor its use infringes the intellectual property rights (whether a patent, utility model, functional design right, aesthetic design right, trade mark, copyright or any other intellectual property right) of any other person.
Applicants are not entitled to any compensation or reimbursement for any costs. The applicant’s participation shall not constitute employment, assignment or offer of employment or assignment.
Tag your model with “replicator2”. Only entries with valid tag will participate!
Winning designs will be chosen based on the rules and requirements.
This Challenge starts on December 10, 2012 and ends on January 11, 2013, at Last Time Zone.
Winners will be announced latest February 11, 2013.
All cash prizes awarded through Paypal (http://grabcad.com/faq#money). Void where prohibited.
The contest sponsor has the right to promote the winning entries.
MakerBot Replicator 2 (SRP $2,199)
MakerBot Original Replicator (SRP $1,999)
$250 + GrabCAD T shirt + coffee mug
GrabCAD T shirt + coffee mug
GrabCAD T shirt + coffee mug
GrabCAD T shirt + coffee mug
The Jury is comprised of GrabCAD and Makerbot staff.
Founded in 2009, Brooklyn-based MakerBot® has grown to be a global leader in desktop 3D printing. There are over 13,000 MakerBot Desktop 3D Printers in use by engineers, designers, researchers, and people who just like to make things.
The MakerBot Replicator™ 2 Desktop 3D Printer, MakerBot’s fourth-generation machine, sets a new standard for the company in resolution, build volume, speed, ease of use, and affordability. MakerBot Replicator 2 Desktop 3D Printers are available for sale through www.makerbot.com/store, its worldwide network of distributors, as well as through the company’s brand new flagship retail location.
If you don't receive the email within an hour (and you've checked your Spam folder), email us as confirmation@grabcad.com.
116 comments
Scott Bruins over 8 years ago
Very cool! Looking forward to seeing some cool designs!
Sara Sigel over 8 years ago
I agree @Scott. This should be fun to watch.
Hardi Meybaum over 8 years ago
I already pressed "Follow". Can't wait for the first design.
Tiago Bárbara over 8 years ago
Awe... wait for it ... some! Great challenge.
brepettis over 8 years ago
Oh yeah, here we gooooooooooo!
teigan over 8 years ago
what is that model in the picture? a tractor beam concept?
Tristan over 8 years ago
wow great challenge! Im looking for the GrabCad Mug and shirt.
Robert Steiner over 8 years ago
Looking forward to seeing the designs ! This is gonna be fun.
Aref A over 8 years ago
The possibility of owning your own mini - portable - machine tool - cnc machine is awesome. I'm thrilled.
Simonr over 8 years ago
I have a feeling that in 2040, a bicycle might seem the vehicle of the future!
Scott Bruins over 8 years ago
Already working on a few ideas! ;)
Steve Desrosiers over 8 years ago
Wow!,... awesome challenge!!
AIT OUFKIR YASSINE over 8 years ago
best challenge ever, Replicator Wait me !!
Mateus Vinicius Tomasi over 8 years ago
aw yisss!!!! my models will rule
Garrett Taylor over 8 years ago
I'd honestly be suprised if we had vehiclws like Speed Racers Mach 6 by then...a
Nattawat Wongklom over 8 years ago
wow
Dragan Beljan over 8 years ago
Given by individual parts may be round, oval, in the form of rollerv
Martijn Loonen over 8 years ago
i really like 3d printing and have a fair amount of experience with it. I was wondering if the models needed to be print readyv
Robert Steiner over 8 years ago
Yes - the models should be designed for assembly and the individual parts suitable for 3D printing. The file format for 3D printing is .stl
Alfonso Gonzalez over 8 years ago
:)
Martijn Loonen over 8 years ago
Are there more design guidelines than a wall thinknes and max. size?
Robert Steiner over 8 years ago
@ Mohammad - .stl files please.
Robert Steiner over 8 years ago
@ Martijin - parts should be designed for assembly - either by pin, snap fit, glue or fasteners. We are open to creativity on your design(s).
Roy over 8 years ago
http://grabcad.com/library/santas-sleigh-2-dot-0--1
best model already exist...:p
Aref A over 8 years ago
rocket boost sleigh for santa claus. steroid santa ? :) Innovative regardless ! :)
William over 8 years ago
Hi jury members, can any one tell me what font your logo 'Makerbot' is in? thank you :P
max bracic over 8 years ago
not 100% shure ..!
max bracic over 8 years ago
www.dafont.com/designer-block.fonv
max bracic over 8 years ago
Hi-- see problem when i post comment the last letter is changed ( -block.fonv MUST stay - block.font)..!
William over 8 years ago
Thanx again Max emmm not so sure that is the correct one :(
William over 8 years ago
I got your E-mail, thank you.... Looks very much like it but not 100%... Thanx a lot for your help the E-mail I shall try that font anyway's and see how it looks... Your help is apprecited :P
Robert Steiner over 8 years ago
Here is correct font. http://www.k-type.com/?p=296
William over 8 years ago
Thank you Robert :)
Vaibhav Bhujbal over 8 years ago
Is it so that the whole model must be is some given dimensions??
marcos over 8 years ago
Model parts should fit, be scaled to or be cut into sections of no greater than 28.5 x 15.3 x 15.5 cm.
Robert Steiner over 8 years ago
@vaibhav - The finished model can be any size. Individual parts are limited by the size of the build plate.
Negrievski Nenad over 8 years ago
Hi. Can Makerbot use transparent materials?
Alexei Kositsin over 8 years ago
Do i miss something or this challenge is to make a future car (2040) ??? I just saw spider and cutter... ?!
Sara Sigel over 8 years ago
Yes @Alexei you should create futuristic transport - whether that means a car, bike, personal plane, or whatever is up for you to decide. Write out a description of why you chose what you did in the description. Have fun!
Marcus Wolschon over 8 years ago
Why do all these challanges want us to break the tagging function in Thingiverse?
Car-models have nothing to do with "replicator2". They are no bug-fixes, improvements or replacement parts for that printer and thus should never have a tage labeled like that!
Also GrabCAD is missing a way to specify the license of your design.
..oh and "sign in to comment" leads you to the start-page, not back to this page to comment on.
Sara Sigel over 8 years ago
@Marcus we use all member feedback to help make GrabCAD better. Thank you for letting us know! Sorry about your frustration with tagging. You can feel free to come to me or submit an "I wish this page" from anywhere on the site if you come across any other issues.
Vaibhav Bhujbal over 8 years ago
@Robert- I still didn't understand . Please tell me more in details :)
Alfonso Gonzalez over 8 years ago
@Nenad Negrievski, no they just have transluscent but no transparent plastics, i think, check their webpage!
Ioannis Skarlatakis over 8 years ago
I was wondering if you can print on one hit a set of parts (ex. Shaft & bearing) with the appropriate tolerance to allow any DOF (Degrees of freedov :) )...
Ioannis Skarlatakis over 8 years ago
Additionally what is the smallest diameter of a spring that can be build To be more precise I am looking for the diameter of the wire (I presume 1.5 mm but I want to be sure...)
dano vinson over 8 years ago
How does one submit a model (or project) that is already posted here? Would changing the tag to "replicator2" on the project enter the contest?
Ioannis Skarlatakis over 8 years ago
Is there any specific reason that I can not see my submission???
( http://grabcad.com/library/caelifera-vehiculuv )
I tagged it as "replicator2" and submitted it through the challenge page....
Is there any kind of delay??? Please advise asap...
Thanks in advance
dakoda reid over 8 years ago
I have also submitted my concept and I do not see it listed in the entries.
http://grabcad.com/library/2040-electrafe-motorcyclv
Ridwan Sept over 8 years ago
Wow, you're so amazing guys. keep creative :)
Kevin Put over 8 years ago
Replicator2 BONZA Personal Transporter - MAGNETIC LEVITATION DISPLAY - is not in the list...
Brian over 8 years ago
All the Designs look great! Great work everybody!
Vaibhav Bhujbal over 8 years ago
I have submitted up my model for the competition but I am not able to see my entry in the above entries. I have even tagged it !!
http://grabcad.com/library/flying-car-concept--v
Vaibhav Bhujbal over 8 years ago
@Sara please fix it !!
http://grabcad.com/library/flying-car-concept--v
Kevin Put over 8 years ago
Same here :( Replicator2 BONZA Personal Transporter - MAGNETIC LEVITATION DISPLAY -
Vaibhav Bhujbal over 8 years ago
:( Saw yours even you have tagged it but its still unseen :(
pedders over 8 years ago
design engineers are much more likely than mechanical engineers, like me, in this type of competition ... they have better tools to make models more attractive ... because this contest has nothing to do with the real possibilities of the car of the future, but is merely a design competition, which awards more attractive design so that the real possibilities of the technology ... I guess that's something that designers do not have: the mental block of what is possible and what is not ... in this sense, never will win in a contest of this kind ...
Ioannis Skarlatakis over 8 years ago
@Sara Sigev Hi there I hope you are fine could you please update on what happened with the last models as they still don't appear in the list...
Additionally something happened and the models reduced from 138 to 135 this morning how can you explain that !!!
I put my trust on you and the GrabCad team...
Many thanks
Luis Cordoba over 8 years ago
Great contest, good luck to everyone:D!!!
Bryan Morris over 8 years ago
You guys are some seriously creative individuals, MakerBot's going to have a hard time with this one! :D
Chris over 8 years ago
@Pedders - You underestimate where a real designer comes from. We have a great background in both engineering AND art. We are able to make functional products that work superbly and look amazing at the same time. After all form follows function. Yes we are allowed to take some creative license, be we are not tied down by what is possible, allowing us to dream in new directions.
Guillaume Cabandé over 8 years ago
I can't find my project in the list while I have ulploaded it (http://grabcad.com/library/sealin) in due time. Can you help me ?
Ioannis Skarlatakis over 8 years ago
@Guillaume Cabandv Well I don't know what happened & what causes that problems but still no one reply to my maseges ...
Alexei Kositsin over 8 years ago
Just wait. they will sattle it up. not the first time.
Ioannis Skarlatakis over 8 years ago
Happy to hear it...
Sara Sigel over 8 years ago
@Dano You have to upload it through the "submit entry" button and add the "replicator2" tag. Sorry for the inconvenience. Please note that if you delete your model you'll lose all likes and points associated with it - maybe something new is the way to go.
Sara Sigel over 8 years ago
Hi everyone, there will be a delay as the challenge comes to an end with your entry showing up in the Results tab. Just be sure to upload through the "submit entry" button and include the tag "replicator2". Once the Challenge is over, I will refresh the entries and you should then see yours. This could take up to 24 hours. If you're worried, you can send me a PM with a link to your entry before the end of the Challenge and I will check all of them for you. Good luck and sorry for the inconvenience!
Sara Sigel over 8 years ago
I have updated the entries and your work should now be included. Please send me a message at sara@grabcad.com if you do not. Winners will be announced by February 11!
Kevin Put over 8 years ago
Thanks for fixing it and for the info Sara. Let the waiting begin :-)
Driton Z about 8 years ago
Its 11th of february... :)
Alexei Kositsin about 8 years ago
Yes, finally. It will take day more to finish. As i remember Sara's msg. Good luck to all
Ridwan Sept about 8 years ago
congrats to all winners :D
Ioannis Skarlatakis about 8 years ago
Congrats to all winners... I am not really sure what the main criteria for the selection were or the order of the winning models but never mind....
Let's stick on that this Challenge had a lot of innovative models with good ideas...
Honestly, I was expecting the “Hybrid Transportation System”, the “Cheetah quadricycle” or the “Saesta” to be in the winning list… but again that is my opinion… ;)
However, I am really happy about “LB1” to be included I really enjoy that Model!!!
Congrats once more to OMEGA… Looking forward to see pictures from your actual 3D printed model!!!
P.S. The story on 2039 was so Awesome! (Circular magnetoplamadynamic Thruster) Seriously!!!! ;)
Angelo about 8 years ago
congratulations to all of the winners!!!
Branko Stokuca about 8 years ago
Congratulations to all winners.
Greg about 8 years ago
Congratulations to all winners and all over!
Tim Gueller about 8 years ago
Google search minority report hovership. Look at alpha, then read rule 5.
Ioannis Skarlatakis about 8 years ago
@Tim Gueller You have a good point on what you are saying... Why don't you try to contact a member of GrabCad (Sara Sigel) to check their opinion... I don't know Tim maybe we miss something!!! ;)
Sara Sigel about 8 years ago
We are looking into it with the MakerBot judges. Thank you @Tim and @Ioannis
marcos about 8 years ago
very nice work, and congratulations to all the participants except "the pirat winner"
Driton Z about 8 years ago
Tim Gueller, good point! Its ok for the people that come on the 45th place, but not the winner.
Sara Sigel about 8 years ago
After lots of consideration (thank you for reaching out to us), the judges and GrabCAD decided the design is 'similar' but we don't believe infringes on the Minority Report model. So without further ado, congratulations to all winners. This was such an inventive and creative Challenge, I enjoyed all the entries!
Ioannis Skarlatakis about 8 years ago
Obviously it was just a funny challenge... But everyone have to admit that the judgement it was even more funny...
@Sara forgive me if I am rude, as it is not in my intention. You will just find me on the other side of this decision.
As a matter of fact if it was about the copyrights of both models that have been submitted by the same user, he would have been in the court and you know that.
Apparantly the similarity is so big that touch the plagiarism!
Regards
IOANNIS
P.S. 1
Just a little bit disappointed...from the facts that doesn't match on what you believe as a committee.
Nothing more to comment and thank you for reconsidering a different point of view (Tim's).
P.S. 2
Hey look at me I am smiling again...take care.
Chris Dermody about 8 years ago
Unless, as per the comment referencing rule2, (which is now deleted) that the submitter was part of the team that worked on the models for minority report, and had permission from relevant copyright owners to submit to the competition, then no rules were broken really were they?
matthew gueller about 8 years ago
I think the quality of the models of the winners was pretty good for a competition like this. Nevertheless, I do believe that if someone introduced a product to market that looked similiar to a Makerbot Replicator 2X, Makerbot would most likely challenge them on it.
In my opionin, there is some lose of credibility on the judges for not recognizing and working around the issue
Pt the question out there and let the community decide. GradCad is a social site, let the users vote and see what the community has to say.
Scott Bruins about 8 years ago
I don't like online voting. It becomes a contest to see who has the most friends willing to sign up for the site and not who has the best design. I much prefer to have a panel of "expert" judges. I think the contest went well and the winning designs are very good.
marcos about 8 years ago
mmm what if just everybody wait for the next similar challenge to do our best ..... and between us the participant check randomly one model once in a while, then before the day of results if someone see something suspicious tell it to the grab cad staff..... maybe is time to move on ..... the winner was already designated .....
Alfonso Gonzalez about 8 years ago
I would like to know why @omega doesn't reply to the Grabcad community... also questioning if he's really a designer or just an ideas borrower, we know as he said there are pradigmas or archetypes in common, which are the basis for analogues and holomogues in everything, for example in comparative biology. But here, personally, it's too, ya know whata mean!
Let's him (@omega) encourage to answer aobut this topic.
Cheers to everybody, and congrats.
Miguel Riego about 8 years ago
It is really a shame to see that the winning entry is a copy of one of the Star Wars Space Pods and the second winner is nothing but the work of a kid with no design understanding of a transportation product There were MANY interesting and quite well though out ideas.that could had won. Congratulations to all the participants and really what a shame
LXMaker over 7 years ago
3D printer just to market is relatively expensive, after all, is a technology that has just started, manufacturing cost is relatively high, after a period of time,technology is more and more popular, the price drop. Consumers consider theother countries of the brand, the price is relatively low, such as LXMaker.The high price of China 3D printer LXMaker launched new products.Interested in 3D print can log onto the http://goo.gl/6l6j29 or http://goo.gl/2wt6LU view details.
florida wilson over 2 years ago
I like the way you present information about that. and it's good to hear that MakerBot Replicator 2 Desktop 3D Printer. recently I have been faced issues while I tried to connect my printer to my laptop then i took assistance from https://www.canonprintersupportnumbers.com/blog/fix-canon-printer-error-state-windows-10/ and they assisted me nicely to resolve my issues.
George Martin almost 2 years ago
Thanku for giving the useful information.
https://www.contactemailssupport.com/blog/how-to-fix-aol-error-301/
George Martin almost 2 years ago
It was a best article, I really owe to you,
keep writing such staff which helps readers to evaluate themselves, Thankyou.
<a href="https://www.contactemailssupport.com/blog/how-to-fix-mac-outlook-error-150/">Outlook Error 150</a>
Sharp TV Repair Dubai over 1 year ago
This printer isjust amazing, its 3D prints are just amazing. Great job!
We repair all brands of tv. Get your tv repaired from the comfort of home. 100% safe & reliable Sharp TV Repair Dubai Service by our trusted and top-rated technicians.
Book now! Experienced professionals. 100% quality assurance. On time service guarantee. Personalized attention. Brands: Samsung, Lg, Sony etc.Contact us on our website https://f2help.com/sharp-tv-repair/
George Martin over 1 year ago
I found your article interesting, would love to follow your other posts in future.
If you facing any problem regarding
<a href="https://www.contactemailssupport.com/blog/how-to-fix-outlook-error-code-17897-on-mac-2011-2/">Outlook Error Code 17897 on mac</a>hit in it or For more information you can call us on our Toll-free No.+1-888-633-7151
elisa martin about 1 year ago
Pretty Interesting post. Could not be written any better. Thanks for sharing! <a href="https://www.contactemailssupport.com/blog/how-to-fix-aol-http-403-forbidden-error/">AOL HTTP 403 Forbidden Error</a>
Aisha perween 12 months ago
We provide best and high level service for Haier tv repair Dubai, LG tv repair Dubai, mitsubishi tv repair dubai, vizio tv repair dubai, sharp tv repair dubai and many other brands and models. For more information check our website.
https://www.samatechnicalservices.com/tv-repair-international-city-dubai/
Robert john 6 months ago
Thank you so much for sharing such an Amazing Content,with us. You really have a Good Knowledge , and I really enjoy it. Blog - https://www.printererrorsupport.com/blog/fix-epson-printer-offline-problem-windows-10/
Jack Smith 5 months ago
Are you looking for IJ setup Scan Utility or IJ Printer Utility is an application developed by Canon for making the print/scan job easier. The IJ Scan Utility enables you to scan photos and documents to your computer operating on Windows or Mac. have any issues can connect our expert engineer can resolve your all query available 24/7 in the US. https://canon-printer-support-numbers.com/canon-com-ijsetup/
Please log in to add comments.
Log in