Chesapeake, United States
Gleason spiral bevel gear set
This is an accurate model of commonly known Gleason spiral bevel gear set used for 5-axis CNC machining. The tooth surface is generated on spiralbe...
Globoid Gear set 41/8
Globoid, Double Enveloping Worm, Cone Drive
Hypoid Gear set for automotive drive axle
This 3d model of a hypoid gear set is for manufacturing on a universal CNC milling machine. Special design of the input pinion does not allow machi...
41/8 Globoid Gear set
41/8 Globoid gear set is a better alternative to Cone Drive gears produced in USA, MI because of higher accuracy of the tooth surface. No lapping n...
Variable ratio rack and pinion for steering system
#d CAD models are used for manufacturing of variable ratio racks. VR Racks are cut on a 3 axis CNC machines from accurate 3d CAD models. ZAKGEAR CA...
Spiral Bevel Miter gear set
Spiral bevel gear set with increased torque capacity
Globoid Gear Set
Globoid, also known as double enveloping worm gear
Helical gear model with correct tooth root geometry
The tooth surface is generated on special software for correct tooth root geometry which is generated by a cutting tool with a fillet radius on the...
Hypoid drive axle gear with dual input
The advantage of this gear is nearly no radial load from the gear mesh. So, nether output ring gear or the input pinion need radial bearings to cou...
35:7 ratio hypoid gear set with tooth contact localization
This is currently the most accurate model of hypoid gear tooth surface. The tooth surface consists of two parts: the working flank (larger area) an...
Worm Gear with ZI (involute) tooth profile
The worm gear tooth surface is generated on special worm gear tooth generating software from spiralbevel.com The gear tooth is virtually cut by a s...
High Ratio Hypoid gear set
High Ratio Hypoid gear and pinion tooth surfaces are generated on special software. The gear and pinion tooth have profile and lead modification in...
Helical gear pump
Pump gears usually have undercut on the root. This model shows correct geometry of the undercut. Both: the involute flank and the undercut are calc...
not involute screw pump gears. Surface is generated on special software from spiralbevel.com
Variable ratio rack for steering system
Automotive steering systems use variable ratio racks. 3d CAD models are used for prototyping and for manufacturing